Used Core Sampler for sale (1,062)

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Cedpfxscr S Ecj Abbehf Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, For sale is an Engel injection moulding machine, type ERC 43/1-EA, including robotic handling. Cjdpfxsxc D Dco Abbohf The machine is in good condition and ready for immediate operation. The machine is currently in operation and can be inspected on site. Professional dismantling and loading included. Technical data: Year of manufacture: 2000 Operating hours: 69,000 - Clamping unit: Clamping force: 3,000 kN Platen size: stationary 1,050x980 mm, moving 1,050x900 mm Min. mould installation height: 350 mm Max. platen distance: 1,200 mm 2 core pulls 2 air valves Centre ring diameter: 160 mm - Injection unit: Screw diameter: 70 mm Max. shot volume: 1,155 cm³ Specific injection pressure: 1,779 bar Temperature release up to 500°C - Handling: X: 500 mm Y: 800 mm Z: 1,880 mm C-axis: 0-90° pneumatic 2 suction/gripper circuits Freely programmable I/Os Conveyor belt 4,000 x 600 mm, height-adjustable Predefined program sequences, sprue separation, quality part placement Transport and loading can be organised Europe-wide at extra cost upon request. Prices are exclusive of VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase/Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Total machine weight 11500 kg Max. mould weight 2535 kg Accessories: Cjdpfx Aboxz Tq Nsbohf - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2008, Standard Horizon SB-09 clamp perfect binder + PUR + MG60 Gatherer . Combine gathering units for a total of 12 stations features automated operation, push-button simplicity, and high-quality production perfect binding. a fully automatic 9-clamp perfect binder designed for industrial book production. The system is suitable for both medium and large print runs, delivering high productivity, flexibility, and a wide range of automation features. The machine can process both EVA and PUR hotmelt adhesives and is designed for use in inline production lines as well as a stand-alone solution. Key Features: - Fully automatic setup and operation for minimal setup times and high efficiency. - 9-clamp system for continuous high-speed production. - Compatible with EVA and PUR hotmelt adhesives (interchangeable glue tanks). - Two glue application rollers for optimal glue penetration and strong binding. Cjdpjxyqcgsfx Abbshf - Automatic book thickness detection and precise cover scoring (up to 4 scores). - Flexible cover feeding: SB-09V with roller grip, SB-09VF with rotary grip for flap covers. - Production speed up to 4,000 books per hour. - Integration into automated production lines with JDF workflow (pXnet). - Optional: Quality control via weight checking, image checking, and reject unit. - Ideal for offset and digital printing, variable book sizes and thicknesses. Technical Data: - Number of clamps: 9 - Book block thickness: 1 – 45 mm - Max. book format: 400 x 280 mm (off-line), 330 x 250 mm (in-line) - Min. book format: 148 x 105 mm - Max. cover size: 400 x 660 mm - Min. cover size: 135 x 220 mm - Cover weight: 82–302 gsm (normal), 105–348 gsm (coated) - Speed: up to 4,000 books/hour - Adhesive: EVA and PUR hotmelt (interchangeable tanks) - Power supply: 3-phase, 200 V, 50/60 Hz, 23/25 A - Machine dimensions (system): approx. 4,720 x 1,685 x 1,660 mm

Condition: excellent (used), TAMAR Type: FEMET_WI_ID071_TAMAR light microscope PLMIS Light microscope The TAMAR light microscope ID071 is used for the optical inspection of samples with a maximum size of approx. 780x650mm2 (substrate size) in the PLG clean room. Substrate size complete substrate size (780x650mm2) Objective: The objective focuses the light emanating from the observed object into a real image for the viewer. Bright field mode (BF), the light coming from the microscope is directed through the objective to the sample. High resolution, low contrast Dark field mode (DF)  Illumination mode to increase contrast, high contrast for edges and particles. Principle: The center of the incident light beam is covered, only peripheral light is directed through the objective and hits the side of the sample. Edges and particles appear bright and the smooth background dark. TAMAR light microscope ID071 X-Y Stage Cjdpfsh Nmtgex Abbehf Software Revision 1.0 Condition: used Scope of delivery: (Autosampler as shown) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: M-10iA R-30iA Mate, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a comprehensive 77-Point Protocol inspection conducted by our in-house robotics engineers. Brand: FANUC Model: M-10iA Controller: R-30iA Mate Chedpfxjwku Hte Abbjf Payload: 10 kg Reach: 1420 mm Robot Weight: 130 kg Despite its compact size, this robust robot weighs only 130 kg and delivers a 10 kg payload with the highest wrist moments and inertia in its class. Cable and airline routing is greatly simplified with a 50 mm hollow wrist and upper arm, resulting in reduced system costs and enhanced reliability. The M-10iA can be installed on the floor, wall (at any angle), or ceiling. The J3 axis can flip over, enabling the robot to work behind itself and significantly increasing the work envelope. Delivery Time: By mutual agreement IRS Robotics® Refurbished: 77-Point Protocol – thoroughly tested on our in-house test benches, replacement with new oil/grease and batteries, fully cleaned, and repainted in your preferred RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About Us: Our daily core business is the supply of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. Worldwide shipping.

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Equipment: - Compact 5220 - Scorer VSA stepless Chjdpfx Asihahbebbjf - Strip stop - Mech. braked support rollers - Free standing support compl. Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Condition: used, mileage: 465,328 km, power: 316 kW (429.64 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, Manufacturer: MAN - Type/Model: TGS 18.430 4x2 - First registration: 15.09.2022 - Mileage: 465,328 km - Number of axles: 2 - Emissions class: Euro 6 - Transmission: Automatic - Brakes: Disc - Length: 6,283 mm - Width: 2,550 mm - Height: 3,104 mm - System designation: Schwarte V 2000 - Centrifugal pump - MAK 3002 Plus - Sampler - Data transmission - CIP cleaning Cedpfx Abox Dndpobehf

Condition: excellent (used), Year of construction: 2018, operating hours: 20,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 523 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Size of mould platens (h x v) 985 x 915 mm Distance between tie bars (h x v) 630 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 55 mm Ls/D ratio 20 Injection pressure 1904 bar Stroke volume 523 ccm Shot weight (PS) 476 gr. Injection rate 216 ccm/s Screw speed 280 1/min Plasticising rate max. 49,7 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 37 kW Installed heating capacity 18 kW Adjustable barrel heating zones 5 Cedpfx Aexz Tqvsbbjhf Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,60 x 2,20 x 2,20 m Total machine weight 11000 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 150 X: 900 mm Y: 700/700 mm Z: 2000 mm C: 0 - 90 Grad Additional Options: - Bluepower - Servodrive - 2 x air valves - 3 x core pulls - 2 x 6-fold water battery

Condition: good (used), Year of construction: 2000, Capacity 1800 Watt voltage 230 V core drilling diameter max. 100 mm thread dia. m30 mm Cjdpfxjxzu Dko Abbohf tool adaptor MK 3 core drilling diameter max. Keyless 19 mm weight 25 kg je nach Gebiet 100€ .

Condition: excellent (used), Spectro Type: Ciros Vision CCD Cedpfx Aevyd Rujbbjhf Analyzer Ciros Vision CCD Total height: 162cm, total width: 150cm, total depth: 90cm Adjustable extractor Total air output 500m³/h Condition: used Scope of delivery: (Autosampler as shown) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB6700-300/2.7 IRC5, load capacity: 300 kg, arm reach: 2,700 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® industrial robot. Includes our warranty and a comprehensive 77-Point Protocol inspection performed by our in-house robotics engineers. Chsdpfxjwqqtvs Abbof Special price due to excellent base condition. Tested by our engineers on our internal test benches. This robot will be delivered professionally cleaned, but not repainted. Brand: ABB Model: IRB670-300/2.7 Controller: IRC5 Payload Capacity: 300 kg Reach: 2.7 m Supplied with ABB Lean ID (see documentation): The IRB 6700 LeanID ensures flexible operation and minimizes downtime caused by cable wear, providing improved process economy and reduced manual intervention. In summary, IRB 6700 LeanID delivers an excellent return on investment. Optional: We can supply the robot with an ABB IRBTx004 track (up to 32 meters on request). Complete with integrated 7th axis drive unit in the robot controller, motor, cable chain, grease pump – delivered fully functional and operational. About us: Our core business is the reliable supply of refurbished A-brand robots: ABB – KUKA – Fanuc – YASKAWA. Established 2002. We ship worldwide.

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning Chjdou I R Utjpfx Abbjf - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: good (used), Year of construction: 2007, operating hours: 47,791 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H. The 2nd vertical injection unit 80V is equipped with a 22 mm plastification. The injection volume is 38 ccm with 1590 bar injection pressure. clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm horizontal injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar vertical injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 1590 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components Codpfjxwvhiox Abbshf measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: excellent (used), Year of construction: 2015, operating hours: 22,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 670 x 670 mm Distance between tie bars (h x v) 420 x 420 mm Mould opening stroke 500 mm Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Codjxz Tp Espfx Abbshf Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 4-fold water flower Additional Options: - 1 x Air valve - 2 x hydr. core pulls - Accumulator - APC - Robot interface according to Euromap 67 - 4 x hot runner controller

Condition: used, Bruker Type: Tensor 27 IR spectrometer Full sample flexibility. The improved QuickLockTM mechanism and the locking button on the front even bulky accessories can be installed quickly and, above all, safely. The INVENIO can also be equipped with three software-controlled beam outputs for a variety of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integration sphere Autosampler for liquids Chsdjvwcikopfx Abbjf High-throughput analysis module HTS-XT Reflection unit for the air-water phase boundary Much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: IRB6700-235/2.65 IRC5 (RW6), load capacity: 235 kg, arm reach: 2,650 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a thorough 77-Point Protocol inspection, performed by our in-house robotics engineers. Cjdpjwvq H Tjfx Abbshf Brand: ABB Model: IRB6700-235/2.65 Controller: IRC5 Payload Capacity: 235 kg Reach: 2.65 m Available with ABB LeanID if required (see documentation): The IRB 6700 LeanID ensures flexible operation and reduces downtime due to cable wear, which in turn provides improved process economy and less manual intervention. In summary, the IRB 6700 LeanID offers an excellent return on investment. Optional Equipment: We can supply the robot with an ABB IRBTx004 track (up to 32 meters, if required). Supplied complete including: 7th axis drive unit in robot controller, motor, cable chain, grease pump – fully functional and tested. IRS Robotics® Refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, repainted in your desired RAL colour. Includes accuracy status measurements (repeatability, accuracy, backlash). About Us: Our core business is the reliable supply of refurbished A-brand robots: ABB – KUKA – YASKAWA. Established in 2002. We ship worldwide.

Condition: new, Year of construction: 2025, Large door for loading and unloading. 2 exhaust air openings (1 exhaust air connection ø 92 mm and 1 exhaust air connection ø 64 mm) for the connection of an exhaust system. Sandblasting cabinets for clean blasting work without contamination of the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Optimum visibility and work protection during workpiece processing due to the viewing window with glued-on protective film Dust-free working due to all-round seals on lid and door frame Stable storage grid allows workpieces to be placed in the cabin interior With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside Safe stand due to rubber feet Scope of delivery: High quality blasting gun with ceramic nozzle 4 pieces of ceramic nozzles (4/5/6/7 mm) Chsdpfocqm Sbsx Abbsf 12-volt fluorescent tube with 230-volt power supply and external switch Incl. 5 pcs. spare foils for viewing windows Two large, integrated latex work gloves Model SSK 2 Article-No. 6204001 Technical data volume working cabin 220 l Air consumption 200 - 500 l/min Working pressure 2,8 - 8 bar Compressed air connection 3/8 ". Blasting medium core size 0,42 - 0,125 mm A [...]

Condition: ready for operation (used), Year of construction: 1998, Stock-No. 13610 Manufacturer Krauss Maffei Type of machine KM 110 – 390 C2 Year 1998 Working hours h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1100 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Stroke volume 156 ccm Shot weight (PS) 142 gr. Injection rate 123 ccm/s Screw speed 391 1/min Plasticising rate max. 22 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 18,5 kW Chodpfoub S Uljx Abbjf Installed heating capacity 12 kW Adjustable barrel heating zones 5 Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 1,60 x 2,00 m Total machine weight 6000 kg Max. mould weight 1485 kg Accessories: - Anti vibration pads - 6 x Water flow Additional Options: - 2 x air valve - 2 x core pull - Robot interface according to Euromap 12 - Electrical screw drive - Accumulator

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, KRÜSS Type: FP8400 Remarks: (Year of manufacture 2019) The device has never been put into operation, is in mint condition and is in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analysis techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K) and lithium (Li) and alkaline earth metals such as calcium (Ca). The measurement for these elements is carried out simultaneously in one step. Through consistent modernization of the flame photometers and a special focus on safety-related concepts, completely new fields of application are opening up for many cost-sensitive customer groups - from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of AES's main strengths, and the technology of the FP8000 series also scores with high determination accuracy. Measuring food samples Quality assessment of high-purity glasses and vials for pharmaceutical packaging Concrete classification Analysis of infusion solutions. Flame photometer laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: Csdpfxjvy Uyte Abbohf 0.001 mg/l for all elements Accuracy: +/-1% with appropriate quality of the standards Precision:

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg Csdpfx Abew D T Dksbehf - available immediately -

Condition: excellent (used), Vivid Easymount EM-1650DH Manufacturer: Vivid Laminating Technologies Chjdpfx Abew Ebcksbsf Easymount EM-1650DH Laminator Description: For sale is a professional laminator Easymount EM-1650DH from Vivid Laminating Technologies. This machine is ideally suited for print shops, sign makers, or graphic studios, and enables high-quality double-sided hot lamination up to 1650 mm width. Overview & Applications: The Easymount EM-1650DH is a powerful, double-sided heated wide-format laminator designed for professional use in print finishing and sign production. It is excellent for: - Posters, graphic prints, signs - Mounting onto boards - Pop-up displays - Vinyl, adhesive films, and application tapes - Outdoor advertising and banners The machine enables both hot and cold lamination, as well as mounting work with double-sided lamination for precise results. Features & Benefits: - Professional-grade double-sided hot lamination - Robust industrial quality for daily use - Ideal for banners, posters, signs, roll-ups, displays, etc. - Also suitable for board mounting - Easy operation via clear digital panel - Compatible with all common 3" film rolls - Optional accessories available (e.g., take-up system, additional mandrels) Model: Easymount EM-1650DH Series: Code EM-1650 Max. Film Width: 1650 mm Model Type: DH = Double Hot (heated upper & lower roller) Suitable for: professional double-sided hot lamination Technical Specifications: Feature / Value Laminating speed: 6 m/min Laminating width: max. 1650 mm Max. material thickness: 25 mm Roll diameter: 130 mm Warm-up time: approx. 20–25 minutes Roller heating: Infrared (internal) Temperature range: 0–130 °C Control panel: Digital Pressure adjustment: Manual with display Film core: 75 mm (3") Dimensions (W×D×H): 1990 × 650 × 1255 mm Power supply: 220/240 V, 32 A, 3200 W Weight: 365 kg Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications reserved!) Shipping: Pick-up preferred, shipping by freight forwarder possible upon request! For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Chjdpsxw N Sbsfx Abbef Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Chsdpfx Abjxwmkusbef Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: new, Year of construction: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Codpfxoxw N N Hs Abbohf Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -