Used Core Sampler for sale (1,065)

Condition: excellent (used), Catalogue number 7791 TECHNICAL DATA - Max main blade diameter with scorer: 350mm - Max cutting height: 105mm - Main blade adjustable up/down + angle - Spindle diameter: 30mm - Spindle locking - With sliding table - Cutting length with carriage: 1430mm - Cutting width at the fence: 1000mm - With side table - With scorer - Max scorer diameter: 80mm Kjdoxpvk Ijpfx Aacodu - Scorer spindle diameter: 20mm - Main motor: 5.5kW - Extraction nozzle diameter: 100mm - Table size: 115x625mm - Table size with extension and widening: 2150x1105mm - Blade guard - 3 rotation speeds: 3200/4500/6000rpm - Dimensions (LxWxH): 2300x3350x1520mm - Weight: 746kg Net price: 11900 PLN Net price: 2800 EUR at an exchange rate of 4.25 EUR (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface Kdedpsxl Ty Eofx Aacsu External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Kjdpfjxl Dw Uox Aacsdu Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW Kdodpfst U Agmox Aacju The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: excellent (used), Year of construction: 2019, HP R2000 Latex hybrid printer Only 130.000m² printed. Full maintenance service done in september, excellent shape. Year: 2018 Kdedpfxev Iz Hce Aacju Extended tables included You can find product presentation on the HP Web pages For further information please refer to enclosed data sheet. Core features: Up to 2.5 m (98-in) wide boards Maximum media thickness: 5 cm (2-in) 5-liter ink cartridges colors, 3-liter white Indoor Production: 43 m²/hr (463 ft²/hr) - 14 boards/hr

Condition: new, overall weight: 1,300 kg, empty load weight: 700 kg, maximum load weight: 600 kg, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 165r13c, Sturdy and high-quality sales trailer for snacks or goods. Our* snack bar trailers* from the *SELLER* range are manufactured with an insulated sandwich body. The extremely stable steel frame is welded and hot-dip galvanized, which ensures high stability. The *sales flap* and *entry door* have a welded frame so that the *sales case* remains permanently stable. A lockable personal lock in steel and *not in plastic* is built into the door. The *case body* made of 30 mm sheet steel sandwich has a galvanized outer skin which is also powder-coated. The insulation is made of a foamed PUR core. The *car trailer* is silver-grey on the outside and white on the inside. Four crank supports jack up the *snack van*. An inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*. Ksdpfx Ajpgi Nzjacjdu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, For sale is a high-quality panel saw from SCM, renowned for its outstanding precision, stability, and smooth operation—ideal for professional use in woodworking. Technical highlights: Precision: Smooth-running sliding table with a guide accuracy of 0.05 mm over a 3 m travel length. Construction: • Upper section made from multiple-reinforced, torsion-free aluminum profile • Base frame constructed from extremely rigid steel welded structure • Sliding surfaces above and below made of induction-hardened, ground steel • Carriage mounted on bearings for exceptionally smooth glide, comparable to ball bearing motion Technical specifications: • Fixed table: 1150 x 630 mm • Table height: 880 mm • Sliding table: 3050 x 350 mm • Sliding table travel: 3200 mm Kodpjxk Uvfefx Aacjdu • Saw blade tilt range: 90° – 45° • Max. saw blade diameter: Ø 450 mm • Scoring blade: Ø 120 mm • Arbor diameter: main saw 30 mm, scorer 20 mm • Main saw speeds: 3200 / 4500 / 6000 rpm • Scoring saw speed: 9800 rpm • Max. cutting width with rip fence: 1000 mm • Max. crosscut length (with scorer): 3200 mm Power & dimensions: • Main saw motor output: 7.5 HP • Scoring saw motor output: 1 HP • Space requirement: 3200 x 3300 x 1000 mm • Weight: approx. 900 kg • Dimensions with sea-worthy packaging: 2120 x 1270 x 1080 mm This machine impresses with its superior build quality, robust construction, and outstanding cutting performance—perfectly suited for accurate cutting tasks in furniture and interior fit-out as well as for professional craftsmanship. Delivery and thorough testing possible.

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Ksdoxm Sa Hepfx Aacedu Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Year of construction: 2023, condition: new, Fully automatic orbital stretchfilmwraping machine with air bubble film unit SPINNER 1000s + BN Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 1,5kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total Power:5,5 kW - Total weight: 1100 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Automatic stretchfilm hooking system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit. (INCLUDED FOR THIS OFFER) Technical features: Product to Wrap Sizes - Max. length: Unlimited Kedpfjfuwkcex Aacedu - Min. length (wxhxl): 100x18x550 Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 12m/sec. - Max. Load Capacity: 100kg/m Stretchfilm features: - Max. width: 200mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron Air bubble film unit: - Max. film width: 900mm - Max. film reel diameter: 700mm - Reel core diameter: 20~76mm - Suitable film materials: PW film, PE air bubble film, PVC film - Cutting & welding system operating temperature: 50°C~150°C

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer Kdedpfx Asvimd Neaceu clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: good (used), Year of construction: 2008, operating hours: 26,033 h, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, BATTENFELD TM 400-3400 warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 controller: UNILOG B6S year of construction: 2008 operation hours: 26033 h technical data clamping unit clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm ejector stroke: 250 mm ejector force: 81 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar screw length: 22 l/d screw stroke: 375 mm Ksdpsxcviksfx Aacsdu screw speed: 178 min screw torque: 3759 N plasticising rate: 67 g/s PS injection rate into the open: 346 g/s PS nozzle stroke: 600 mm measures & weight measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG equipment included Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface robot EUROMAP 67 interface USB Schuko-socket 16A

Condition: new, overall weight: 1,300 kg, empty load weight: 620 kg, maximum load weight: 680 kg, loading space length: 2,500 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 165r13c, Sturdy sales trailer for snacks or goods. Our* snack bar trailers* from the *SELLER* range are manufactured in an insulated sandwich construction. The extremely stable frame is welded and hot-dip galvanized, which ensures basic stability. The *sales flap* and *door* have a welded frame so that the *sales case* is permanently stable. A personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich *case body* has a galvanized sheet steel skin which is also powder-coated. The insulation is made of a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The food truck is supported by 4 crankable supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. Kdedpfxopfc Dze Aacou As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,500 h, functionality: fully functional, laser power: 100 W, type of cooling: water, laser wavelength: 10,600 nm, For sale: Trotec Laser GS1000 Engraving Machine – 100W CO₂ Brand: Trotec Model: GS1000 Year: 2015 Power: 100 Watts Laser Type: CO₂ Cooling: Water-cooled (chiller included) Kdsdpsw S Dcrofx Aaceu Operating hours: Approximately 1000 hours Condition: Very good – regularly serviced and fully operational Working area: 500x500mm Description: Professional Trotec Laser GS1000 machine, ideal for fast engraving and cutting on organic materials (wood, leather, acrylic, cardboard, paper, textiles, etc.). Fitted with a 100W CO₂ laser tube, this machine offers speed, precision, and reliability for manufacturing workshops, signage, personalized items, and prototyping. Featuring an integrated computer with an external display, making machine operation simple directly from the workstation. Key features: - Water cooling with included chiller - Integrated PC + external monitor - Resolution up to 1000 dpi - Autofocus - Interface: USB / Ethernet - Compatible with major CAD/CAM software (CorelDraw, Illustrator, AutoCAD, etc.) Fume extraction not included Included with the machine: - Speedmark control software - Chiller (water cooling) - Screen + integrated PC - User manual - Basic maintenance kit General condition: Machine well-maintained, 1000 operating hours, stored in a clean workshop. Fully functional and ready for immediate use. Location: Bordeaux / France Shipping: Collection or shipping possible Availability: Immediate

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded Kdjdpfx Ajwlq Hloaceu McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Condition: used, mileage: 851,389 km, power: 310 kW (421.48 HP), first registration: 05/2015, overall weight: 18,000 kg, fuel type: diesel, color: black, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, M-Benz Actros MP4 1842 4x2 Tractor Unit VIN: 013957 Chassis / Attachments: * Wheelbase: 3,700 mm * Full air suspension * Tyres: Front 385/55 R22.5 Rear 315/70 R22.5 * Condition: Front approx. 40/60%, Rear approx. 60% * 2 x aluminium tanks (570L + 430L) * 1 x AdBlue tank Cabin Equipment: * Classic Space 2,300 mm cab * 1 berth * Sunroof, refrigerator * Auxiliary heating * Air conditioning * Cruise control * Radio // CB radio * BT / AUX / USB Engine / Transmission * 310 kW // 422 HP // 12,809 cc // Euro 6a * PowerShift 3 // automatic transmission * Retarder * Differential lock Weights * Gross weight: 18,000 kg * Payload: 9,938 kg * Unladen weight: 8,062 kg Other * 1 previous owner * Safety inspection valid until 01/2026 New general inspections/safety checks or weight downgrades/upgrades available on request. We are happy to assist you with obtaining export/temporary license plates, and can also arrange to transport your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or printing errors. Subject to changes, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The core strength of Leible Nutzfahrzeuge lies in the sales of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our corporate philosophy is defined by fairness and integrity. As customer satisfaction is our top priority, we offer an excellent all-round service package and provide a dedicated contact person to support you throughout the purchase or sale of a vehicle. See for yourself! Kdsdpfx Aowlw Uceacou Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to organize special transports for you. Temporary/export license plates We are happy to assist you in obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW Kdodscud Nhopfx Aacsu weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: used, mileage: 1 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, empty load weight: 1,471 kg, first registration: 04/2025, next inspection (TÜV): 04/2028, energy efficiency: A, color: white, number of seats: 2, fuel: diesel, Equipment: air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, Passenger airbag, side airbag, heated exterior mirrors, electric windows, adjustable steering column, multifunction steering wheel, rear parking sensors (PDC), windowless partition, wooden floor loading area lining, electric exterior mirrors, Bluetooth hands-free system, height-adjustable driver's seat, USB port, hill start assist, automatic start-stop system, traction control (ASR), outside temperature display, reversing camera, daytime running lights, front head airbags, remote central locking, DAB+ digital radio, emergency brake assist, fatigue warning system, voice control, touchscreen, traffic sign recognition, steel rims, high beam assistant, summer tires, right-hand sliding door, speed limiter, Android Auto, Apple CarPlay, spare wheel, 10 All In One (AIO) infotainment system: with SD display, radio (AM/FM/DAB), WiFi mirroring (for AA, CP), 2x USB-C (1x data 1x charging) with digital 10-core instrument cluster (monochrome).--STOCK CAR--- immediately available---- Immediate information MICHAEL HUELSMANN. Errors and prior sale excepted. Stock number 156 Kdedpfewhfz Nox Aacju

Condition: new, overall weight: 1,000 kg, empty load weight: 560 kg, maximum load weight: 440 kg, loading space length: 2,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 155r13c, Highly visible sales trailer for snacks or goods. Our* snack trailers* are manufactured in an insulated sandwich construction. A very stable frame, welded and hot-dip galvanized, provides the basic stability. The flaps and doors have a welded frame so that the sales box is permanently stable. A proper personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich case body has a galvanized sheet steel outer skin which is also powder-coated. The insulation is a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The *snack van* is supported by 4 crank supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *food*, *beverages*, *fast food*, *low food*, *non-food,* * *street food*, *sales goods* and much more. Kodepfcpfepfx Aacedu The standard equipment of the sales trailer at a glance: *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, four stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *sales flaps*, *tarp triangles*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, PVC on floor, *100km/h shock absorber* and *anti-theft device*.

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock Kdedexdnraopfx Aacsu from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: used, mileage: 1,784,757 km, power: 265 kW (360.30 HP), first registration: 05/2012, overall weight: 18,000 kg, fuel type: diesel, color: black, axle configuration: 2 axles, maximum load weight: 8,240 kg, empty load weight: 9,760 kg, driver cabin: other, gearing type: other, emission class: none, suspension: air, number of seats: 2, Equipment: ABS, onboard computer, trailer coupling, Manufacturer: Scania - Type/Model: P 360 4x2 - First registration: 29.05.2012 - Mileage: 1,784,757 km - Number of axles: 2 - Cab: M - Transmission: semi-automatic - Retarder: - Suspension: air - Brakes: disc - Unladen weight: 9,760 kg - Body builder: Pro Wam - Tank material: stainless steel - Total tank volume: 11,020 L - Tank compartments: 3 - Insulated - System designation: impeller system - Impeller pump - Pro Wam PK-3 - Sampler "single bottle" - CIP cleaning - Manhole with drip tray Kedpfswtzwdsx Aacsdu

Condition: new, Code: N0764 Brand: SCM Model: NOVA SI X - CE Standard Circular saw with +/- 46° double blade tilting with 3 controlled axis - Version READY 3 UP - CE Standard equipped with following optionals : Start buttons integrated into the sliding table Squaring frame with Compex device Squaring fence with n° 2 LCD displays for position reading Technical data: Max. saw blade diameter with mounted scorer mm 400 Maximum saw blade projection from table to 90°/+46°/-46° mm 136/97/60 Cutting width on rip fence mm 1270 Squaring capacity mm 3200 Kdedpfjd Dc Ecex Aacsu Three-phase motors starting from kW/Hz 7 (8) / 50 (60)

Condition: excellent (used), Year of construction: 2004, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Kedjh Dr E Tspfx Aacsdu Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Lot consists of: (1) Rubber-Injection-Molding-Machine for Wire Cores Position consists of: (1) Wire core rubber injection molding machine Kdjdpfx Aaswna Ahocju Technical Details: English: Dimensions (L x W x H): 5.5m x 1.5m x 2.9m Voltage: 230 / 400 V Frequency: 50 Hz Compressed air: 0.6 MPa / 6 bar Screw diameter: 80 mm Without control program German: Dimensions (L x W x H): 5.5m x 1.5m x 2.9m Voltage: 230 / 400 V Frequency: 50 Hz Compressed air: 0.6 MPa / 6 bar Screw diameter: 80 mm Without control program

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, machine/vehicle number: 221240, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Kodpowg Tt Refx Aacsdu Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: excellent (used), Year of construction: 2005, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Ksdpsh Dp R Esfx Aacjdu Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement