Used Copy Frame for sale (9,283)

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation Tjdpfek S Htxjx Ahuef - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Bogli 71 Frame Saw with Infeed and Auxiliary Trolley and Distribution Device after the Sawmill Sawmill Type: Bogli Marathon 71 - Frame: 710 mm, hydraulic sawmill Tedpfx Aon I Udxohusf - Hydraulic adjustment of saws, raising and lowering of roller - 55 kW motor - Carriage with auxiliary trolley, track gauge 90 cm - Distribution unit after the sawmill Everything as shown in pictures no. 1, 2, 3, 4 Price negotiable 2. Linck E 28-28 Frame Saw - Frame stroke: 600 mm Everything as shown in pictures no. 5, 6, 7, 8 Price negotiable 3. Linck Frame Saw with Loading Trolley and Distribution Device after the Sawmill Trak Linck 71 - Frame width: 710 mm - Feed: 12 m/min - Fully hydraulic: hydraulic adjustment of saws, lowering and raising of the roller - Linck hydraulic loading trolley with additional device - Distribution device after the sawmill (bag, wedge) Everything as shown in pictures no. 9, 10, 11, 12, 13 Price negotiable

Condition: used, Hydraulic frame press Schafberger & Sprödhuber with manual electrical adjustment. Technical specifications: on demand workpiece height: max. approx. 2,400 mm workpiece width: max. approx. 4,250 mm Todew I Dbmepfx Ahusf Control: Manually

Condition: new, Year of construction: 2024, functionality: fully functional, Pneumatic horizontal and vertical bed frame presses Standard solution suitable for frames 800-1000x1600-2000 mm. Todpfjutbavex Ahuof

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Todpevcqanjfx Ahuef Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, copy head, radius dresser, disc puller Tedpfx Ahswuz Swoujf -Puller: Copy head for grinding wheel puller -Dimensions: see photos -Dimensions: 290/230/H170 mm -Weight: 14.1 kg

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Tsdpfx Aofgpfpohusf Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 200 h, Equipment: CE marking, Skid-mounted installation for processing cohesive (clayey) excavated soils. The objective is to recover stones and dispose of only the soil waste at landfill. Width 2500 mm, length 7000 mm, height 2700 mm. Tsdpfx Ahexccdbjuof

Condition: excellent (used), Year of construction: 1984, Oil-hydraulic frame press Type: Hydro Year of manufacture: 1984, 1.1 kW Weight: approx. 1500 kg 3 vertical and 2 horizontal beams Tsdpfev Im Hnox Ahuef Pressing dimensions: 4000 x 2550 mm Frame size: 4900 x 800 x 2500 mm Clamping beam size: 2850 x 800 x 500 mm

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Tjdpjhzgtujfx Ahujf Height: 1900mm Weight: about 100kg

Condition: ready for operation (used), Technical characteristics Upper vertical spindle 12000 rpm Pneumatic workpiece clamping Jig and copy finger 8 mm collet Tedpfjundg Iox Ahuof Stop in X and Y Useful strokes: X = 310 mm, Y = 120 mm, Z=175 mm Clamping 175 x 230 mm Spray nozzle Recent machine in perfect condition, first hand Power and Motors Voltage: 400 V Pluging: Three-phased Power: 0,75 Kw Motor: 1 CV Overall dimensions

Year of construction: 1980, condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles Tsdjgfcm Aspfx Ahujf -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270kg

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Tsdpfjdzqmzox Ahuof Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: ready for operation (used), Technical characteristics COMPOSITION: - WEINMANN WMS120 multi-function machining and nailing bridge - 3 x Preparation and assembly tables - Intermediate transfer table Power and Motors Todjt U Ufbopfx Ahuef Overall dimensions

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine Tedpfxsp Swvke Ahujf -Manufacturer: Elu, copy milling machine type AS 70 -Travel path: manual X//Y 230/80 mm -Stop depths: see photos -Workpiece clamping: pneumatic -Coolant device -Dimensions: 600/520/H1280 mm -Weight: 111 kg with pallet

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition Todpehrakvofx Ahuef

Condition: ready for operation (used), Technical characteristics Main components of the machine: - Longitudinal sliding frames of the 4 special carriages for blocking and moving the pieces. Working field 14 ml. (X axis) - The horizontal and vertical workpiece clamps can be automatically deactivated by CAD/CAM to allow the machining of larger than standard workpieces or to avoid collisions with the clamping devices. If the machining operations require it, the slides can be automatically replaced. The structure on which the part is clamped automatically tilts by 90° to allow the machining of the lower side of the beam. - Central frame where the beam is fixed (in transverse direction with respect to the rails) - 1 machining unit fixed to the beam - Perimeter cabin delimiting the machining area of the operating unit Machining unit consisting of : - Transverse slide (Y axis) - Vertical slide (Z axis) - Bi-rotary head (B and C axis) - 17 kW synchronous spindle with speed up to 18,000 rpm, coolant and HSK-63E cone tool holder - Workable sections: 1000mm (600mm in double vices) X ep.300mm 5-axis machine control (bi-rotary head) with Tool Center Point (TCP) CAD/CAM software Cooling unit of the electro-spindle with cooling liquid. Automatic lubrication system 1 horizontal tool magazine with 12 stations HSK63E Pre-loading and selection system Tedjtqkalopfx Ahuof Unloading system, made up of 6 supports with idle rollers for unloading the machined part Waste removal conveyor belt Light curtains in front of the machine on the loading/unloading areas and perimeter barriers. Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand Todpfev U Tkgsx Ahuef -Base: height adjustable -Type: Width 1180 mm -Height: 570 mm, adjustable -Number: 11 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H570 mm -Weight: 12 kg/piece

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Todpfxsv Uraae Ahuef Weight 3 tons Good condition

Condition: ready for operation (used), Technical characteristics double copying pneumatical tightening Power and Motors Tjdpfxsundhxj Ahuef Overall dimensions

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm Tsdpfx Ahov U Tr Dsuof -Height: 460 mm, adjustable -Number: 13 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H460 mm -Weight: 11 kg/piece

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) Tsdpfxoh Uhqys Ahusf - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: ready for operation (used), Technical characteristics 2 Lifting tables for timber frames Useful table dimensions: 6000 mm x 3400 mm 6 perforated panels for positioning stops Removable intermediate rule with movable stops Hydraulic cylinders for 80° lifting of the complete deck Vertical clamping by guided beam on square-pitch screws Vapor barrier unwinder Control panel Tjdpfx Ajk Rtxnohusf Starting price: €36,000 excl. tax per unit 60,000 € excl. tax for the whole Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7 Kw Overall dimensions Lenght: 6200 mm Width: 3600 mm Height: 700 mm Weight: 2500 Kg

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 400 mm, adjustable Tjdpfxev U Ttus Ahusf -Number: 14 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H400 mm -Weight: 8 kg/piece

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Tsdpfx Ahsh U Dtujuof Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition