Used Coordinate Table for sale (17,395)

Condition: new, clamping range of chuck 80 - 280 mm height 67,5 mm daylight 100 mm external diameter Futter 300 mm external diameter Spannhebel 480 mm weight 13 kg Characteristics: Knodpfxefv Awpj Abloc • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t Kjdpfx Abjfv Awzelenc ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. Kjdpfxefv Aw Ne Ablonc • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t Ksdpfx Abjfv Aw Telenc ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Knjdofv Axmjpfx Ablsc • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW Knedpfx Abefv Ayysljc welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad Knsdefv Ay Sjpfx Abljc turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad Kodpfofv Azhsx Ablsnc turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Kjdpfjfv Huuox Ablenc Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Kodpsfxpggofx Ablenc Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Year of construction: 2022, condition: new, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display Kjdjfxphlepfx Ablonc and foot-operated remote control

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Kjdpfx Absfh Uw Rslenc Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport.

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotator table Complete set including dual foot pedal control and hand-held control with digital display 5000 kg load capacity Diameter of clamping plate: 1500 mm Height in horizontal position: 1500 mm Knsdpfxjfkt Ebe Abloc Height in tilted position (to center): 1500 mm Speed continuously adjustable from 0.01 to approx. 0.7 RPM Tilt up to 120° Length: 2100 mm Width: 1500 mm

Condition: as good as new (ex-display), Year of construction: 2022, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Knedpfxsfky Iqe Abljc Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW Kedpjfrzt Aofx Ablsnc stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm Kjdpfx Asftd T Ssbljnc weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Year of construction: 2022, condition: new, 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.8 revolutions per minute Very robust, complete set with hand-held and dual-foot remote control Knjdpfx Abjff Ngisljc Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approximately 700 mm Height adjustment with the disc in a vertical position to the center: 960 mm to 1910 mm Dimensions with the disc in a horizontal position: 1200 mm to 1900 mm We offer the rotary tables with capacities of 600 kg, 1000 kg, 3000 kg, and 5000 kg.

Year of construction: 2022, condition: as good as new (ex-display), 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400 mm Tilt up to 120° Height in horizontal position 1300 mm, tilted to the center 1050 mm Length 2.0 m x width 1.4 m Hand and foot remote control Knsdpfx Aod A Etrjblec

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Height: min. 0.65 m, max. 1.530 m. Kjdpjd D D Hljfx Ablenc Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface Kodpjd Rawzefx Ablenc hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + Plasma Nitride" is made of through-hardened tool steel from the special alloy Siegmund X8.7 and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27 mm. The holes have a diameter of 28 mm. Hole arrangement on the tabletop in a 100 mm diagonal grid, parallel hole arrangement on the sides in a 50 mm grid. Includes basic leg assembly. Accessories shown are optional. Kedpfxjd Raw As Ablenc Price excludes packaging and shipping.

Condition: excellent (used), Year of construction: 2004, total height: 1,060 mm, empty load weight: 4,300 kg, load capacity: 4,000 kg, overall weight: 4,300 kg, total length: 6,000 mm, total width: 3,000 mm, table width: 3,000 mm, table height: 1,063 mm, without hydraulic unit Knsdpfjqagvzox Ablec

Condition: new, table length 2900 mm table width 1200 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,77 t dimensions 2,9 x 1,2 x 0,9 m Kodpfxed Iinae Ablonc Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. Ksdpfxed Iince Ablenc height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1400 mm table width 1400 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,5 t dimensions 1,4 x 1,4 x 0,9 m Kjdsd Iindjpfx Ablenc Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!