Used Coordinate Table for sale (17,457)

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Rcsdpfx Akjxpxrheioh Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, table diameter 800 mm table load 600 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 2,0 U/min height adjustment 850 - 1300 mm max. torque on the faceplate 900 Nm engine output 0,37 / 0,37 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. Rcjdpfx Aksfv Aynsijh - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1100 mm table load 2000 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1100 - 1550 mm max. torque on the faceplate 4000 Nm engine output 1,1 / 0,75 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Rcjdpfefv Ayvox Akioh Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 2000 mm table load 10000 Kg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere Redpsfv Ay Ijfx Akiech - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 300 mm table load 50 Kg Rsdpfofv Aztex Akijch swivelling range 90 Grad turning speeds 1 - 12 stufenlos U/min table load capacity 50 kg vertikal total power requirement 0,22 kW weight of the machine ca. 0,036 t dimensions of the machine ca. 0,45 x 0,43 x 0,38 m

Condition: new, table length 400 mm table width 400 mm table load 0,2 t table diameter 400 mm swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 100 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,065 t dimensions of the machine ca. 0,56 x 0,42 x 0,46 m Rjdpfxsfv Azzo Akisch

Condition: new, table length 2000 mm table width 1000 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,38 t dimensions 2,0 x 1,0 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Rcedogarhkopfx Akish Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,18 t dimensions 1,2 x 0,8 x 0,85 m Rcjdpfxjgazm Io Akish Special offer !!! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice)

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Rcodpfx Ajfqncpskish Vertikal stroke 50 mm weight of the machine ca. 0,35 t dimensions 1,2 x 0,8 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, number 96 Positionen weight 600 kg condition neu 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided Redpfxsd Rmbno Akioch 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic, Probe non-stick and torch holder.

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. Rcsdsmhm Axjpfx Akijh The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 855 mm table width 500 mm stroke height 900 mm 340 mm weight max. in kg 500 kg weight of the machine ca. 0,085 t 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. Rcedpfx Asupw Uhekish There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, table diameter 450 mm table load 300 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 300 kg vertikal total power requirement 220 kW weight of the machine ca. 0,078 t Rcodpfoupxa Sjx Akieh dimensions of the machine ca. 0,66 x 0,45 x 0,48 m

Condition: new, number 43 Positionen weight 40 kg condition neu 0 Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs. quick clamping bolts 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 stop and clamping angles 175mm 2 stop and clamping angles 275mm Rodpfxsupxbvj Akioch 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, saw blade guard, scorer, Altendorf F 45 – Panel Saw | ElmoDrive | EvoDrive | ProDrive | HAND GUARD The Altendorf F 45 is one of the highest-quality and most versatile panel saws for professional use in carpentry shops, joineries, interior design, furniture manufacturing, and industrial wood processing. The F 45 impresses with its high precision, robust design, user-friendly operation, and numerous configuration options. Depending on the configuration, it is available with ProDrive, EvoDrive, or the comprehensive ElmoDrive control system. For the highest demands on work safety, the F 45 is also available with the innovative Altendorf HAND GUARD safety system. EQUIPMENT VARIANTS Altendorf F 45 ProDrive Comfortable and clear operation at eye level. The pivoting control unit enables ergonomic operation and precise adjustment of machine functions. Altendorf F 45 EvoDrive Control system with a 7" touchscreen and separate keyboard for comfortable entry of numerical dimensions. The machine axes can be quickly and precisely adjusted. Altendorf F 45 ElmoDrive The most comprehensive control system variant of the F 45. The large 12" touchscreen allows axes and numerous software functions to be conveniently selected and controlled. Altendorf F 45 HAND GUARD For the highest safety requirements, the HAND GUARD is available on the basis of the F 45 with the optical safety system. The camera technology recognizes hands or hazardous situations in the area of the saw blade. In the event of a hazard, the saw unit is lowered, and the saw blade is stopped. After activation, the machine is immediately ready for use again. The HAND GUARD variant is equipped with ElmoDrive. TECHNICAL DATA • Manufacturer: Altendorf • Model: F 45 • Machine type: Panel saw • Control systems: ProDrive / EvoDrive / ElmoDrive • Safety system: optional HAND GUARD • Main motor: depending on the configuration, 5.5 – 11 kW • Saw blade diameter: up to max. 450 mm, larger sizes also possible • Saw blade overhang: up to max. 204 mm • Swivel range: 0 – 46°, double-sided TwinFlex swivel also possible • Working height: approx. 850 / 880 / 910 mm • Double roller carriage: up to 3,000 mm • Cutting length: up to 5,000 mm • Cutting width: up to 1,600 mm • CNC parallel fence: optional • CNC angle mitre fence: optional • Tool clamping system: AKE EQUIPMENT AND FUNCTIONS Depending on the configuration, the following are possible: • electromotive height and swivel adjustment • automatic correction of the cutting height during swiveling • motorized or CNC-controlled parallel fence • CNC angle mitre fence • double roller carriage and various carriage lengths • different motor powers • scoring system • various saw blade diameters • RIP FENCE SECURITY • Altendorf HAND GUARD safety system Rsdjz Nmvajpfx Akijch CNC PARALLEL FENCE The CNC-controlled parallel fence enables quick and highly precise positioning. According to the manufacturer, the system achieves a travel speed of up to 250 mm/s with a dimensional accuracy of ± 0.1 mm. AREAS OF APPLICATION Carpentry shops, joineries, furniture manufacturing, interior design, shop fitting, solid wood and panel processing, as well as plastic, aluminum, and industrial wood processing. Inspection and demonstration available by appointment. Nationwide transport, commissioning, and training available upon request.

Condition: like new (used), Year of construction: 2024, Welding positioner table for sale Sale only within EU member states! No private sales. MAE can be inspected upon request. Rcedpfxjz Rxvuj Akieh All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: new, Catalog number: RE066 TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 3200 mm - Movable table stroke 3400 mm Rsdpfx Aoztncqjkioch - Cutting width with rip fence 1250 mm - Sawtooth plate ⌀350 mm - Rip fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade 95 mm - Max. cutting height with ⌀350 mm blade 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 650 kg ADVANTAGES – machine is new – CE certificate – warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate (with larger exchange rate fluctuations, the price may change) Net price: 26000 PLN Net price: 6047 EUR, depending on the exchange rate of 4.30 EUR (Prices may change with larger fluctuations)

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 2050456, We are selling a Magnaflux magnetic particle inspection set (Magnaflux GmbH, Germany). It is new and has not been used since its manufacture in 2020. 1. Magnaflux ETT 250 demagnetizing tunnel with conveyor belt Year of manufacture: 2020. Serial number: 2050447 Power supply: 400 V / 50 Hz, 1.8 kVA, 4.4 A Ampere-turns: 3.4 kAW. Protection class II Tunnel effective window: [150 × 200 mm] Belt: [2700 mm] long, [200 mm] wide SEW-Eurodrive WAF20 DRN71MS4 geared motor, 0.25 kW, i=48, IE3 Electrical panel and connecting cable included 2. Magnaflux rotary inspection table with bottom extraction Rsdjz R R Epepfx Akisch Perforated plate with Ø [1300 mm] Integrated centrifugal extractor in the base 4 workstations with padded armrests Side supports for lamps or accessories Rotation: [manual / motorized] Ideal for MT/PT fluorescent inspection in a UV cabin Lot price: [€8,500]. Also sold separately: tunnel [€5,000], table [€3,500]. Prices are negotiable, plus VAT. Collection in Erandio (Bizkaia, Spain). We can assist with loading and transportation.

Condition: excellent (used), Motor: 5.5 kW Rods Agrffopfx Akisch Cutting height: 9 cm Table length: 330 cm Feed width: 100 cm Scoring unit Cutting angle and cutting height are hydraulically adjustable.

Condition: new, number 10 Stk. clamping range 25 mm 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m Redpfx Akeyv I Eteisch 10 Quick-release clamping bolts - 28mm hole system - for 25mm table thickness

Condition: new, number 80 Positionen weight 150 kg condition neu 28 mm dimensions 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Rcedpfjyv I Eyox Akijh Material: Burnished high-quality steel Scope of delivery: see images Table not included!!

Condition: used, Year of construction: 2014, The Kongsberg C series is a multifunction super-wide digital cutting table for soft and rigid signage production. It’s perfect for protective packaging and can handle a wide range of materials, from foam and plastics, flexible materials, folding carton and all kinds of corrugated. The Kongsberg C table is designed to keep up with the faster, wider printers of today and tomorrow. Exceeding the standards in versatility, precision and productivity, it has everything that Kongsberg tables are noted for, and more. Max. material size: 3200 x 3200 mm Max. speed: 1666 mm/s Max. acceleration 15.7 m/s2 Tools: - vibracut HF - ⁠presscut - ⁠rotacut - ⁠rm knife - ⁠heavy duty unit - ⁠cordoni di varie tipologie - ⁠HD-30 - ⁠V-notch knife 45 In production, demo possible upon request Rcodpfjzcqp Tex Akieh For further technical details please refer to attached brochure

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm Rcsdoymf Rtjpfx Akieh • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel. Rcodpfx Akeym Dt Hsioh

Condition: used, functionality: unexamined, input voltage: 220 V, Used Leitz Wetzlar Measuring microscope setup (UWM) with external XY readout and power supply for lighting. Rodpfx Akewm Hqcjiech Manufacturer: Ernst Leitz GMBH Wetzlar Movement possibility on X and Y axis, and adjustable in height. Camera can be added on top for making recordings. Digital readout X and Y axis by means of Sony Magnescale LH31A-2