Used Cooling Trough for sale (7,925)

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Nledpfozi Tmajx Ahfsf Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: new, Year of construction: 2020, Rittal TopTherm enclosure cooling units – types SK 3304540 and SK 3329540, new and unused. Both units are designed for 400V / 50Hz and 460V / 60Hz and are available from stock. Nlodpfx Ajy Iyvbjhfsf Available for immediate delivery.

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original. Nljdpfxsyvrvpe Ahfsf

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Nsdsy Sf Ukspfx Ahfelf Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: ready for operation (used), For sale: Conveyor belt ✅ Length: 10.5 m ✅ Width: 0.65 m ✅ Transportation can be arranged ✅ Wide selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs. Nljdpfxjzrf Aro Ahfsf

Condition: ready for operation (used), For sale: Conveyor belt Nodpezrfzbofx Ahfelf ✅ Length: 5m ✅ Width: 1.20m ✅ Transport can be arranged ✅ Wide selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt for your needs.

Condition: ready for operation (used), Belt conveyor for sale ✅ Length: 9.5 m ✅ Width: 0.65 m ✅ We will provide an additional belt for the conveyor ✅ We can arrange transport ✅ Wide selection of belt conveyors available on site Please contact us. We will help you choose the right belt conveyor to meet your needs. Nledezrft Dopfx Ahfof

Condition: ready for operation (used), Conveyor belt for sale ✅ Length: 2m ✅ Width: 0.75m Njdpfxjzrfrgo Ahfslf ✅ Transport can be arranged ✅ Wide selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs.

Condition: ready for operation (used), Belt conveyor for sale ✅ Length: 9.5/10 m ✅ Width: 0.6 m ✅ Transportation can be arranged ✅ Wide selection of belt conveyors available on site Nledpfszrfn Isx Ahfsf Please contact us. We will help you select the right belt conveyor to meet your needs.

Year of construction: 2012, condition: used, functionality: fully functional, Reisner KWR-S 100 HK cooling system Water Temperature 12-16°C Cooling capacity 120kW Winter relief Nlsdpfx Ajzh E Awshfof Technical data Chiller KWR-K 100 KS/ Compressor: Piston compressor Volume flow: 110 m³/h Refrigerant: R407c Speed: 1,450 rpm Cooling capacity: 112 kW Power consumption: 37 kW Coefficient of performance 3.5 (average) Evaporating temperature +7°C Condensation temperature 45°C Operating voltage 400 V-3 PH-50 Hz Cooling capacity (dry cooler) 150 kW Air inlet temperature 35°C Maximum air inlet temperature 45°C Air volume flow 45,600 m³/h Number of fans 4 Current draw per motor 7.2 A Power consumption per motor 0.9 kW (controlled) Operating voltage: 400 V-3 PH-50 Hz Sound pressure level 65.7 dB (A) at 10 m Device length: 5,350 mm Device width: 1,123 mm Device height: 1,150 mm Empty weight: 418 kg

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Nljdpfx Aewi Icxehfef Pumps were dismantled in working order. Dismantled and packed on several pallets. Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Condition: as good as new (ex-display), Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Manufacturer: Güntner Type: GVV050.1A/1-X.E Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Fan size: 830 x 680 mm Nlodozk A Upepfx Ahfjf Cooling surface: 875 x 810 mm

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Nlodpopu R Ncjfx Ahfsf Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Conveyor belt, trough conveyor, trough feeder, presumably GASUS type FB 400 x 5500 Nlsdpfxohz U Azj Ahfef Belt conveyor, transport conveyor, band conveyor Factory number: F, Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Pulley diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - Inlet hopper 600 x 400 mm - The support stations are 2-part trough-shaped - Metal support rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular frame made of steel - Cover plate above the conveyor belt, removable - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Nlodpfxjvw A T No Ahfef Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Nledpfjynkbmjx Ahfef Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: excellent (used), 457 USED Ventilation, ventilation ducts, and air exchange in a bread cooling room. The device is used to cool bread and exchange air in a bread cooling room. DIMENSIONS OF THE ROOM IN WHICH IT WAS OPERATED (in cm): - W: 820, - L: 1300, - H: 430. Nlodozlnhqepfx Ahfsf The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, Year of construction: 2023, Buhler Cooling Die Polycool 1000, designed for meat analogues. New in box. Nedpfx Ajxw Ebfshfolf

Condition: excellent (used), Year of construction: 2012, 455 USED Koma CDS cooling - proofing room. TECHNICAL DATA: Nlsdpfjzlm T Sox Ahfef - year of production: 2012 - temperature range: -12°C - +30°C EXTERNAL DIMENSIONS (in cm): - width 137 - wepth 260 - height 255 INTERNAL DIMENSIONS (in cm): - width 89 - depth 205 - height 200 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We also offer bakery machines, bakery equipment, roll lines, bread lines, refrigerator and proofer. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), 453 USED Koma CDS cooling-proofing room. TECHNICAL DATA: - temperature range: -12°C - +30°C Nljdpfx Ajzlhx Ajhfsf EXTERNAL DIMENSIONS (in cm): - width 137 - depth 260 - height 255 INTERNAL DIMENSIONS (in cm): - width 89 - depth 205 - height 200 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We also offer bakery machines, bakery equipment, roll lines, bread lines, refrigeration and proofer. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2008, 355 USED WP Aroma Cooler, a device for rapid cooling of bread and baked goods. TECHNICAL DATA: - Cooling temperature to: +18°C EXTERNAL DIMENSIONS (in cm): - height 305, - width 130, - length 227. INTERNAL DIMENSIONS (in cm): - height 198, Nsdpfx Asywummehfolf - width 78, - length 187. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0G000072, The Frascold Q5-21.1Y compressor is a reliable, high-performance solution for a variety of industrial and commercial applications. With an impressive flow rate of 21.18 m3/h, this compressor guarantees efficient cooling and refrigeration processes. Whether you work in HVAC, cold storage or food processing, the Frascold Q5-21.1Y delivers exceptional performance. ➢Product highlights: ✓Powerful performance: The Q5-21.1Y boasts a maximum power consumption of 6.6 kW, making it a suitable choice for demanding applications. Nodpfx Ajr Id Tqjhfslf ✓Optimal Oil Management: With a 1.6-liter oil charge, this compressor ensures smooth operation and long service life. ✓Rugged construction: the Q5-21.1Y is built to last, with dimensions of 449 mm x 286 mm x 325 mm and a weight of 79 kg. Its solid design stands up to the rigors of industrial environments. ✓Versatile connections: The suction connection is 1 1/8", and the flow is 3/4", allowing easy integration into existing systems. ➢Specifications: Compressor Frascold Q5-21.1Y, discharge: 21.18 m3/h, maximum power consumption: 6.6 kW, oil charge: 1.6 l, connection: suction 1 1/8 inch, discharge 3/4 inch, dimensions (length x width x height) 449 x 286 x 325 mm, weight: 79 kg` Price without VAT.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0M001224, Le compresseur Frascold Q Series Q5-28.1E est une solution fiable et efficace pour diverses applications industrielles et commerciales. Conçu avec une ingénierie de précision, ce compresseur offre des performances et une durabilité exceptionnelles. Que vous en ayez besoin pour la réfrigération, la climatisation ou d'autres systèmes de refroidissement, le Q5-28.1E garantit des résultats constants. Nedpfx Aor Id T Ashfslf ➢Points forts du produit : Options de tension polyvalentes : Le Q5-28.1E est compatible avec différentes configurations de tension, notamment 220 v-240 v/380 v-420 v/3 phases/50 hz et 265 v-290 v/440 v-480 v/3 phases/60 hz. Cette flexibilité garantit une intégration parfaite dans votre installation existante. Construction robuste : avec un poids net de 79 kg, le Q5-28.1E est robuste et conçu pour résister aux environnements exigeants. La construction robuste garantit une longue durée de vie et un fonctionnement fiable. Dimensions compactes : Avec des dimensions de 449 mm (L) x 286 mm (l) x 328 mm (H), ce compresseur est peu encombrant. Il s'intègre dans les petits espaces sans compromettre les performances. ➢Spécifications : Frascold Q Series Q5-28.1E compressor comes with: Voltage: 220v-240v/380v-420v/3ph/50hz - 265v-290v/440v-480v/3ph/60hz Net Weight: 79kg Dimensions: 449 (L) x 286 (W) x 328 (H) The Frascold Q Series Q5-28.1E compressor combines versatility, durability and a compact design, making it an excellent choice for your refrigeration system. Whether you're upgrading an existing system or starting a new project, this compressor delivers exceptional performance. Rely on Frascold's reputation for quality and reliability.

Condition: used, functionality: fully functional, mileage: 270,000 km, power: 102.97 kW (140.00 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 2,760 kg, maximum load weight: 665 kg, overall weight: 3,500 kg, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 3, total length: 6,315 mm, total width: 2,190 mm, total height: 3,230 mm, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,240 kg, loading space length: 3,635 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, compressor, cooling unit, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, This light-duty truck with both freezer and refrigerated compartment in the cargo box is equipped with a new engine installed in our workshop and therefore has 0 km on the clock. Furthermore, the vehicle is in very good mechanical condition, though it has some bodywork damage. The vehicle can be inspected at our premises. Nlodpfx Aey Ny Duehfsf

Year of construction: 2015, condition: used, Damage: none Nedow Igp Hspfx Ahfslf