Used Cooling Trough for sale (8,286)

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kodpfx Aoul In Rjdtowt

Condition: used, Aqua’s optimised adiabatic cooling system achieves a perfect balance between load, water usage and fan speed. The innovative control management system engages the water spray only when absolutely necessary. This ensures maximum water evaporation with minimum water wastage. In addition, all spray pipework is constructed in stainless steel rather than plastic, eliminating any risk of corrosion. The coil is protected with a hydrophilic coating. Adiabatic coolers are low-maintenance, cost-effective, and environmentally friendly options for temperature control at your facility. They are a popular alternative to cooling towers and are used in situations requiring water temperatures of 25˚C and above. Kwodpfx Adjwv Raaotet

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Kodowxlmaspfx Adtowt

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Ksdpfxsyb Sdij Adtowt

Condition: good (used), Cooling compressor Kwjdpfeyb Rqusx Adtst Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Ksdpfxoxlkg Ao Adtowt Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, trough conveyor belt conveyor belt with high load capacity Kodpfet Aagyjx Adtewt total length: 1000cm tape width: 80 cm total width: 122cm steel tube frame structure. steel guide rollers strap thickness: 0.8 cm drive: currently not equipped "If required, we can add a geared motor.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 88 kW (119.65 HP), type of cooling: water, overall weight: 1,700 kg, total width: 1,300 mm, total length: 2,000 mm, total height: 2,000 mm, warranty duration: 6 months, Watercooled chiller EF COOLING EVO 90 WKL770FC 88 kW Cooling capacity: 88 kW / 25.02 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling (Dry cooler is additionally required) Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Hydraulic module: 2 pcs. Grundfoss CM 10-5 + 1 pcs. Grundfoss CR20-2 + 1 pcs. Grundfoss CM15-1, expansion vessel, buffer tank 500 l. Dimensions: 2x1.3x2 m. Kwsdpjwlnwuefx Adtst Weight: 1700 kg. Working hours: 10432/10428/1333/1532 h. Condition: Good

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, total width: 2,260 mm, total length: 5,000 mm, power: 4 kW (5.44 HP), input voltage: 400 V, Coolers system for industrial solution. All info on photos. Kwsdpoxaw Rwjfx Adtst

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Kjdpfjh Uyg Njx Adtowt

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, cooling capacity: 406.9 kW (553.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,560 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): -10 °C, input voltage: 415 V, total length: 4,904 mm, total height: 2,650 mm, power: 201 kW (273.28 HP), input current: 338 A, pressure (max.): 15 bar, TVA sets a new standard for air cooled chillers, designed to ensure that processes are both energy-efficient and environment-friendly. Low environmental impact has been achieved by using new HFO refrigerants with low Global Warming Potential (GWP), while higher efficiency/footprint ratios are reached thanks to the special V-configuration of the heat exchange coils and their sizing, Kwjdpfxex Tqvps Adtst the largest among the chillers currently available on the market. The Free-Cooling version - where heat exchange surface areas are double the market average - ensure outstanding performance. The high thermodynamic efficiency, low Total Equivalent Warming Impact (TEWI) is combined with a special focus on maintainability and easy accessibility of the compressors contained in the removable HiRail module which reduces noise emissions

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Kwsdpsw Rn S Uofx Adtjt

Condition: used, tank capacity: 200 l, GENERAL Equipment: disc valve Design type: horizontal Notes: 4-legged chassis made from V2A; internal dimensions at the top approx. 700 x 1105 mm; internal height approx. 360 mm; 1 tank with 2 dents; hand levers for the disc valves are missing Overall width: 750 mm Overall height: 1,020 mm Overall length: 1,250 mm Top: open Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Kodsycli Uopfx Adtowt TANK Mounting: mobile frame Number of feet: 4 pcs EQUIPMENT Outlet: 35 mm Note: slight residues/adherences MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 12,220 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tanks; 1 manhole approx. 340 x 440 mm in the front bottom Overall width: 1,480 mm Overall height: 2,700 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,220 litres Kedjyckupjpfx Adtowt Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Discharge: DN40 DIN 11851 MATERIAL SPECIFICATION Temper system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Kwjdpfx Ajyckt Sodtet Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Kwsdpfx Adsyckt Eotet Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel Kjdpfxeycktrj Adtjwt

Condition: used, tank capacity: 3,640 l, GENERAL Design: suspended Speed: 194 rpm Inner diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 0.49 bar Agitator: beam agitator Location: external storage Cylinder temperature control: half-pipe coil Nameplate: Kodsycivlopfx Adtewt Vacuum: 1.0 bar Volume: 3,640 liters Jacket volume: 132.0 liters Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,450 mm Last use: chemicals VESSEL Heads: dished ends Support design: lug support HEATING / COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head Outlet: available Outlet: 25 / 80 mm AGITATOR Voltage: 380 V Current interrupter: Agitator arrangement: centrally on the top head

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: Crane eyes Design: Suspended Heating/Cooling: available Max. permissible operating temperature: 200 °C Kodpsyciq Nsfx Adtewt Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.0 bar Agitator: Anchor agitator Location: External storage Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 8,250 liters Double jacket volume: 685.0 liters Product-contacting material: Enamel Condition: Used Last application: Pharmaceutical TANK Max. permissible operating temperature: 200 °C Base type: Lugs HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Manhole/Dome: Top cover Outlet: available AGITATOR Agitator arrangement: Centered on the top cover

Year of construction: 2008, condition: used, General condition: average Technical condition: average Visual appearance: average Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Kodeya Izbepfx Adtswt

Condition: used, Polished stainless steel tank Capacity 100 litres Variable speed agitation: double propeller Dimension d.480 x pf 580 Full opening Lid with counterweight Stainless steel valve 1 bar Double jacket with cooling unit. Mobile frame on wheels Dimensions 1300 x 800 x 2100 Kedpfx Adjx R Alwjtjwt

Condition: used, This listing is for the Memmert IPP260eco Peltier-Cooled Incubator The unit is in full working condition and is ready for immediate use Memmert IPP260ecoplus Laboratory and Industrial Peltier Cooled Incubator 256l The Memmert IPP260eco is a professional-grade, Peltier‑cooled forced‑circulation incubator designed for laboratory use across microbiology, food, cosmetics, pharmaceutical testing, and more. Core Features & Capabilities Temperature Control Range: Provides accurate, stable temperature regulation from 0 °C to +70 °C, with fine control and minimal fluctuation. Ideal for sensitive assays requiring tight temperature tolerances. Eco-Friendly Peltier Technology: Solid-state Peltier cooling/heating eliminates the need for refrigerants or compressors—making it quiet, low-vibration, energy-efficient, and low-maintenance. Precise Temperature Uniformity: Powerful internal fan with forced air circulation ensures even temperature distribution throughout the 256-liter chamber. Precision rated at ±0.1 °C. Touchscreen Control Interface: Equipped with an intuitive coluor touchscreen (TwinDISPLAY) offering full digital control over temperature, timing, programs, and alarms. Users can create multi-step programs, view logs, and operate in multiple languages. Delivered With Two Shelves: The unit comes standard with 2 grid-style stainless steel shelves (adjustable), supporting even airflow and stable sample placement. The chamber can support up to 9 shelves total (max load 200 kg). Reliability & Safety ControlCOCKPIT (TwinDISPLAY): Touchscreen display for easy control and monitoring Timer programmable up to 99 days SetpointWAIT function (holds program steps until desired temperature is reached) Safety Features: Electronic and mechanical temperature monitoring Automatic self-diagnostics and alarm systems AutoSAFETY feature that monitors and limits max temperature to prevent overheating Specifications at a Glance Feature Specification Internal Volume 256 litres Temp. Range 0 °C to +70 °C Kwsdpsxhf Dbefx Adtot Uniformity ±0.1 °C Internal Dimensions (W×H×D) 640 × 800 × 500 mm External Dimensions (W×H×D) 824 × 1183 × 655 mm Shelves Included 2 grid-style shelves (expandable to 9 total) Interior Material Stainless steel Doors Inner glass door + insulated steel outer door Connectivity USB, Ethernet, AtmoCONTROL software compatible Power Supply 115 V or 230 V (approx. 600 W) Precision & Control: Ideal for critical applications that require stable temperatures. Energy Efficiency: Peltier technology offers sustainability and low operational costs. User-Friendly Interface: Touchscreen control makes programming and monitoring simple. Robust Construction: High-grade materials ensure hygiene, corrosion resistance, and durability.

Condition: used, This listing is for a Memmert IPP55 Cooled Incubator 53L The unit is in full working condition and is ready for immediate release The Memmert IPP55 Peltier Cooled Incubator is designed for use in scientific research, laboratories, and industrial applications. It features accurate temperature control between 0ºC and 70ºC, ensuring precise environmental conditions for a variety of sensitive experiments and processes. The incubator utilizes Peltier cooling technology, which provides efficient, eco-friendly temperature regulation without the need for compressor-based systems. This makes it ideal for laboratories requiring reliable, consistent temperature management with low noise and minimal heat output. Key Specifications: Volume: 53 liters (1.9 .) Temperature Range: 0°C to 70°C Temperature Accuracy: 0.1°C Convection: Forced ventilation by Peltier fan Control System: SingleDISPLAY with adaptive multifunctional digital PID-microprocessor controller ControlCOCKPIT: High-definition TFT colour display for clear visualization Language Settings: German, English, Spanish, French, Polish, Czech, Hungarian, Chinese Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days Kwjdoxv D Eaopfx Adtst Function SetpointWAIT: The process time does not start until the set temperature is reached, ensuring optimal conditions Calibration: Three freely selectable temperature values for enhanced precision Adjustable Parameters: Temperature (Celsius or Fahrenheit) Programme time Time zones Summertime/wintertime settings Interior Construction: Stainless steel with electropolished grids, providing durability and ease of cleaning Dimensions (W x H x D): Interior: 400 x 400 x 330 mm Exterior: 585 x 784 x 514 mm Electrical Requirements: 230V, 50/60Hz, approximately 275W Applications: Ideal for use in science, research, laboratories, and industrial applications where precise temperature control is critical The Memmert IPP55 Peltier Cooled Incubator is a reliable and energy-efficient choice for maintaining stable temperature conditions in controlled environments, and its advanced control features ensure precision and ease of use.

Condition: used, This listing is for the Cole Palmer Techne Blockice Cooling Heating Block The unit is in full working condition and is ready for immediate use The Cole Palmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Kedpfxoxhfypj Adtjwt Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Year of construction: 2005, condition: good (used), Brand: Rollepaal Pipe Extrusion Technology B.V. Kwodpfx Adoui Ixistst Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW