Used Conventional Milling Machine for sale (65,330)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k Gkodpfx Ajzvfiaecmod X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Power on spindle:16kW Spindle speeds: 3150Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 4700mm Width: 2300mm Height: 2300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 2,500 rpm, total length: 900 mm, total width: 1,100 mm, spindle mount: MK 3, type of input current: three-phase, Three-phase 400-volt motor is running smoothly! The motor can run in both directions (left and right). The spindle speed is adjustable in 12 steps, from 125 to 2500 RPM. Drilling and milling are possible. The spindle has power feed. Three feed rates are adjustable: 0.12 - 0.18 - 0.25 mm/revolution. MT3 spindle with draw-in collet. Maximum drilling depth: 100 mm. The head is height-adjustable. Maximum distance between table and spindle: 750 mm. The cross table is in good condition. Table size: 730 x 210 mm. Coolant pump located in the machine base. Emergency stop switch. Year of manufacture: 2001 Overall dimensions: 90 x 110 x 210 cm. Includes all accessories as shown in the pictures next to the machine. Contact us for shipping options! Gkedpfxo Aiir Rj Acmsd €2,000.00

Condition: good (used), Year of construction: 1970, Deckel FP2 with 500mm travel, Huttelmaier retrofitted tool milling machine with 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. Adjustable table, electrically locked milling guard, SK 40 spindle mount. Accessories: various collets and milling chucks. Good, operational condition. Can be demonstrated under power by arrangement. Gsdo Aih Tpspfx Acmskd

Condition: used, Year of construction: 1990, Control Heidenhain TNC 355 x-travel 1.000 mm y-travel 400 mm Gksdpfxjd N Sngo Acmsd z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, Like-new CNC portal milling machine Roboteus RBF2030V The machine was purchased in 2026 and has only been tested for 5 hours. Gkodpfx Ao Akc Dzecmed Therefore, it is in like-new condition. Spindle: 4.5 kW (equipped with the more powerful motor) Working area (x, y, z): 2000 x 3000 x 200 mm Work table: Grid table with 9 sections and 4 T-slot rails Spindle speed: 24,000 rpm Guideways: HIWIN HGR20 linear rails Drives: Helical racks (X, Y), ball screw 2010 (Z) + hybrid stepper motors 12 Nm with encoder Controller: HXC Motion control 2MHz Control: Mach3 Interface: USB Tool holder: ER25 collet Positioning accuracy: < 0.03 / 300 mm Working speed: < 9000 mm/min The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only, excluding any liability for material defects. No guarantee, warranty, or right of return.

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 3701104, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 5,000 rpm, quill stroke: 60 mm, spindle mount: MK 0, total height: 2,000 mm, total width: 2,500 mm, total length: 2,000 mm, table width: 475 mm, table length: 700 mm, type of input current: three-phase, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,000 kg, input voltage: 380 V, workpiece weight (max.): 300 kg, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 25 A, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained milling machine from a training center, equipped with a HEIDENHAIN TNC 415B control system and an SK 40 milling spindle. It features a hydraulic clamping system and an automatic central lubrication system, and comes with technical documentation and an operating manual. Gkedpe Ahfihefx Acmjd

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 51434/08 >> Rotary, tilting, and swiveling table Gkjdpfx Ao Ahq A Ejcmod >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash, and all spindles move easily. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Gsdpfx Aco Ahq Ekomjkd Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction via this link. Lot of Milling Tools Gsdpogyw S Tjfx Acmskd The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: Universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850   You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2010, condition: used, CNC control system FIDIA with handwheel; travel ranges: X-axis approx. 11,500 mm, Y-axis approx. 1,550 mm, Z-axis approx. 2,250 mm; clamping table, length x width x height, 2 pieces, each approx. 2,000 x 2,000 mm; table load max. 1,000 kg; milling spindle, spindle power S1 / S6 approx. 7.4 kW / 12 kW, spindle speed 16,000 rpm, tool holder HSK 50A, B- and C-axis +/- 210° / +/- 104°, feed rate X-, Y-, Z-axis up to 16 m/min, axis acceleration m/s², machine footprint approx. 14,000 x 2,600 x 3,650 mm, with self-built table, total weight approx. 13,500 kg; NOTE: Fully functional condition, machine has already been disassembled and stored. The machine is already located at a different location in Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Godpfx Ao Af Nl Ujcmjkd

Condition: used, functionality: fully functional, Year of construction: 1994, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gsdpfx Aex U A Iaecmjkd Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, x-travel 1900 mm Gedpfjrpa N Iox Acmokd y-travel 800 mm z-travel 800 mm control 426 Heidenhain weight of the machine ca. 12 t

Condition: used, Year of construction: 1997, Control Heidenhain TNC 407 serial number 60/1997 x-travel 1.000 mm y-travel 600 mm z-travel 700 mm TISCHMAß: 1300 X 600 mm Gedpfx Aeumyhrocmekd Werkzeugwechsler: 24- fac

Condition: ready for operation (used), functionality: fully functional, Tool milling machine DECKEL FP 2 - Active Digital Gods Ai S Hispfx Acmekd -Travel ranges X/Y/Z 400x220x400mm -Spindle speed range 25 - 2500 rpm -16 spindle speeds -Feed rate / stepless in all three axes -Vertical / horizontal milling attachment -Tool holder ISO 40 -Fixed angular table -Drive power 3 kW -Work light -Coolant system -Chip tray -Documentation Dimensions: L x W x H 1.7 x 1.5 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Year of construction: 2013, condition: good (used), Ref. -No.: 10717 Manufacturer: POSMILL Type: H 800U Year of construction: 2013 Gksdpfxs Ahw R Nj Acmed Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine number: 2013xxxx X-Travel: 700 mm Y-Travel: 820 mm Z-Travel: 600 mm Tool Taper: HSK-A 63 Tool places: 96 Spindle Speeds: 18.000 RPM Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Gkedpfx Aj Akchmscmod Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Gsdpfsgvqkujx Acmjkd 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15.2015.70.04.352, total length: 3,930 mm, table length: 2,000 mm, total width: 2,290 mm, table height: 1,300 mm, Wissner WITEC 2015 Eco milling machine for sale For sale: Wissner WITEC 2015 Eco CNC milling machine. A robust and precise milling machine from the German brand Wissner. This machine is suitable for a wide range of milling and machining operations and has been used in our production processes. The machine is being offered for sale due to the cessation of our business activities, making it available for purchase. Features: Brand: Wissner Type: WITEC 2015 Eco Serial number: 15.2025.70.04.352 CNC milling machine Robust industrial design Suitable for precise milling operations Gkedpfxoz A Azqo Acmjd Year of manufacture: 2004 Includes: extraction system / vacuum pump / cooling system / tools / software / etc. The machine is currently still installed and can be viewed in working condition by appointment. An interesting machine for companies looking to expand their production capacity or seeking a professional CNC milling machine or spare parts. If you have serious interest or questions about the machine, please feel free to contact us. Additional photos, videos, and technical information are available upon request.

Condition: used, CNC milling machine fixed price Gedps Aht U Usfx Acmokd loaded onto a truck

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: C105253, 3-axis milling machine 8 pneumatic clamps with auto, independ positioning 2x automatic toolmagazine for 2x 5 tools Gedpsx Eytzsfx Acmokd

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 with 3-axis digital display from K&C, NEW, stepless feed. Technical data: Gjdpfx Ace Ai Evmsmekd >> Year of manufacture 1977, machine no. 2201-4088 >> 3-axis digital display K&C >> Fixed angular table >> Speed: 40 - 2500 rpm >> Stepless feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill extendable - SK40 >> Collet system S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis digital display K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP3 universal milling machine in very good condition. The machine has stepless feed in three axes and a spindle brake. All bellows are new. An oil change has been performed. Mechanically and electrically inspected. The K&C digital display makes working easier and even more precise. Take the opportunity to inspect and test the machine on-site while it is powered up.

Condition: used, Year of construction: 1988, tool adaptor SK 50 digital ja Gedpfx Aceztfyasmokd head swivability ja ° automatic dividing head ja x-travel 1000 mm Weight 3 t

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg Gjdpfx Asx Uz Apscmekd

Condition: good (used), Deckel FP4 MK Milling Machine Technical Data: Travel distances X/Y/Z: 500 / 400 / 400 mm Spindle taper: ISO 40 Spindle speed: 50–2,500 rpm Digital position display: 3-axis Heidenhain TNC 113 Tool clamping: Hydraulic drawbar Drill chuck: 90 mm stroke Universal rotary table: Type 2038 Cooling: Coolant system installed Accessories: Including machine vice Gkjdpe Aggg Djfx Acmsd Machine weight: Approx. 1,700 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Technical details x-travel 1.704 mm y-travel 1.210 mm z-travel 1.003 mm Control Heidenhain TNC 426 total power requirement 65 kVA weight of the machine ca. 16 t Additional information Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Total power consumption: 65 kVA Machine weight: 16.000 kg Equipment: Automatic, infinitely variable 2-axis universal milling head NC rotary table (dividing head) with tailstock 30-station tool changer Chip conveyor Coolant system with internal coolant supply (ICS) Electronic handwheel Godpfx Acs Akct Hsmskd 3D touch probe Machine enclosure Operating manual Machine without clamping units, tools and holder.