Used Complete Production Line for sale (34,047)

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Iaodpjvptqisfx Ag Uol Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min

Year of construction: 2008, condition: ready for operation (used), Highly efficient production line for the production of molded stick ice cream, popsicles and similar products. Capacity of up to 42,000 pieces per hour (can also be used at a reduced hourly capacity). The currently installed mold size is 35ml moldet stick ice cream. Manufacturing date of the line is 2008. Complete line is for sale, including rotary molding system, automatic stick inserter, wrapper, control panels and other components. Full documentation is available. The line was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Approximate space required for installation: 9 x 4.5 m. Ijdpspyha Esfx Ag Usal

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 Iasdpfxsul Uizj Ag Ujl - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml Ijdpfjxvda Dex Ag Usal - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Condition: used, Year of construction: 2016, functionality: fully functional, Pratika 56-T that has been standing still for the last 5 years. Iasdpjxpq Hkofx Ag Usl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, Production line for paving, kerbstones and studs by pressing. Manufacturer: Symmetrica / Symmtech Year of construction: 2013 Production capacity/shift: 220-260 sqm The production line was put into operation for the first time in fall 2014. It has only one owner. The production line is being sold in its entirety. Isdpfeu Abtvjx Ag Uoal For more information, please call us or write to us on WhatsApp: +491779220303

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET Iaedpfx Ajt Txfpeg Usl DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 Ijdpsw Dn Uwefx Ag Ujal The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: refurbished (used), Year of construction: 2001, Working width 40-170 mm Thickness 9-50 mm 6 operator motors of 7.5 KW each Iaodpsqa Dq Isfx Ag Usl

Year of construction: 2016, condition: ready for operation (used), A complete soup production line including can filling, sealing, and washing processes is available. 1) Steam boiler Loos, year of manufacture: 1990, max. operating pressure: 6bar, steam generation: 1250kg/h. Including gas burner Weishaupt, year of manufacture: 1990, max. power: 1730kW, adjustable pressure range: 5mbar-140mbar. 2) Autoclave Lubeca. Including 20 cooking trolleys and various intermediate racks. 3) Can washing machine W. Busser 521-1, year of manufacture: 1984. Including conveyor belt. 4) Can filling and sealing machine. Including conveyor belt. 5) Inkjet printer Linx 8900, year of manufacture: 2019. 6) Basket washing machine Hobart FUX-SAF, year of manufacture: 1990. 7) 2x cooking kettles A.S.T.A. Steiner, max. operating overpressure vessel/double jacket: 0bar/1bar, max. operating temperature vessel/double jacket: 100°C/119°C, volume vessel/double jacket: 300L/20L. 8) Can labeling system. An on-site inspection is possible. This is a complete system with conveying technology and peripheral equipment. Individual or partial sale of the units is possible upon agreement. Isdpfxjxliuro Ag Uoal

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC circular shear with adjustable blades and diameter adjustment system. Automatic double-station stacker with suction-cup arm and interlocked safety doors. Integrated pneumatic and electrical systems with Unidrive inverters and a single control cabinet. Two control panels—one for each machine group—each with a touchscreen, interconnected to ensure communication and coordination between the LARA and TIMAC sections. Table for sheet scrap removal and LARA shear. Main technical data: Maximum strip width: 1,400–1,600 mm (maximum 1,400 mm on straightener) Iaodpfx Agsxr Utaj Uel Sheet thickness: up to 3 mm (carbon steel) / 1.5 mm (stainless steel) Blade diameter: 100 mm Installed power: approx. 16–20 kW Electrical supply: 400 V / 50 Hz Working pressure: 6 bar Overall dimensions (approx.): 8.8 m (L) × 6.8 m (W) × 3.3 m (H) (L-shaped configuration, with side loading and stacking zones)

Year of construction: 2006, condition: like new (used), The wafer and biscuit factory that benefits from a continuous, fully automated production process and has two main lines: wafers and biscuits. The wafer line has a capacity of 35-40 kg/h with a wafer weight of 45-55g and obtaining three quality types: 1. wafer weight = 45g/pc, cream layer = 1.25:1 – capacity –2.77 t/24h 2. wafer weight = 45g/pc, cream layer = 1.35:1 – capacity –2.89 t/24h Iasdpfx Aol Siv Ssg Uol 3. wafer weight = 45g/pc, cream layer = 1.50:1 – capacity –3.05 t/24h The line is equipped with a packaging machine and the collection and reuse of the scraps resulting from the cutting process is done automatically. The biscuit line has a capacity of 300 - 500 kg/h and three qualitative types can be obtained: 1. simple 2. sandwich 3. caramel 4. cocoa 5. glaze Simple biscuits can be: Strength = 300-400kg/h Soft = 400-500kg/h Crisps = 350-500kg/h The production is continuous, automatic, the line being equipped with a caramelizing device, sandwich, with 30 sets of shapes, chocolate coating device, including packaging and 5 temperature zones with independent, automatic temperature control.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Ijdpjt Tw S Ujfx Ag Usal Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Year of construction: 2021, condition: excellent (used), Currently, the industrial line produces 2.2 to 2.5 tons per hour of high-quality pellets for heating from coniferous and deciduous wood. Waste material from other wood processing plants can also be used as raw material. Additionally, pellets can be produced from vegetable raw material for animal feed as an activity, as well as pellets from organic fertiliser for soil fertilisation. The company has been operating for 6 years and has two production lines. The equipment of one 1 ton/hour production has been in operation since 2013 and the second 2 ton/hour is new since 2019 and with proven production functionality. Iaodpfx Aol Sny Asg Ujl

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine Iaedpfx Agshm Exdj Usl 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: ready for operation (used), Complete Veneer production line. Iasdpstryf Ijfx Ag Uol Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Condition: used, functionality: fully functional, machine/vehicle number: D24E/8364, Offer Number: D24E/8364 Machinetype: production line for ZICK ZACK springs Make: WAFIOS Type: SLF4/SLF4S Iasdpfxowi Ub Is Ag Uol Constr. year: wire diameter: 2,4-4 mm spring diameter: 42-55 mm output - pieces/min: ca. 32 m Location: Europe

Condition: used, Year of construction: 2000, MACHINE SCHROEDER PAKUE 6 Iajdpfsx Hi S Nsx Ag Usl Length 3.0 m

Condition: good (used), Complette line for ravioli production. Iasdpfx Aoub Diujg Uel

Year of construction: 1990, condition: ready for operation (used), A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Iedpfx Agjv Nn Hxj Usal

Condition: used, Used filling line for beer GAI up to 900 bph year 2017 The used filling line for beer GAI up to 900 bph, year 2017, delivers a highly efficient and precise technical solution for the bottling sector. Furthermore, this Filling line for beer GAI ensures high performance and adapts to various production needs, meeting the highest quality standards required by industry operators. Main technical features of the Filling line for beer GAI The Filling line for beer GAI operates at a speed of 900 bottles per hour (BPH), which optimizes medium productions. Moreover, the glass bottles support formats of 0.33 L, 0.50 L, and 0.70 L. This system processes beer using isobaric filling, thereby preserving the product’s organoleptic characteristics with precision. The labeling process precedes filling, thus enhancing efficiency and order in the production line while simultaneously optimizing operational flow.. Filling monoblock The GAI MLE441-BIER-003 filling monoblock, built in 2017, integrates several essential functions for the bottling process: 4 rinsing grippers prepare and sanitize the bottles. 4 filling valves deliver precise and rapid dosing. 1 capping head accommodates caps measuring 26.5×5.9. Iajdpfovt Np Nsx Ag Ujl The monoblock measures 3650 mm in length, 1300 mm in width, and 2200 mm in height. Additionally, it consumes 6 kW of electricity, operates at 400 Volts, and runs at a frequency of 50 Hz. Therefore, this technical profile supports flexible installation compatible with standard industry infrastructure. Labeling machine in the Filling line for beer GAI The Enos SIRIAM labeling machine, from 2016, applies labels to the front and rear of bottles using a linear system. Furthermore, the automatic glue level adjustment system utilizes rollers for precision. The optical centering system, based on photoelectric technology, applies labels accurately. In addition, the electronically managed head adjustment allows for quick and reliable configuration. The labeling machine measures 2405 mm in length, 2200 mm in width, and 1690 mm in height. It also consumes electricity at 400 Volts and operates at a frequency of 50 Hz. Operational state and advantages The Filling line for beer GAI operates effectively and integrates seamlessly into an existing production line or constitutes a new one. Moreover, the GAI monoblock and Enos labeling machine work together to create a smooth production process, minimizing downtime and maximizing productivity. This line serves breweries requiring a compact, reliable, and high-performing solution. Likewise, its technical configuration handles various types of bottles and products, offering great production versatility. Conclusion The used filling line for beer GAI up to 900 bph, year 2017, provides an excellent option for those seeking reliable and high-performing equipment. Its technical features and operational state enable immediate implementation, thereby addressing the efficiency and quality needs of the current market.  

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Iaodpfx Ajw Dfgkeg Uel

Condition: used, Used aseptic filling line Tetra Pak A3 FLEX 200S up to 7000 l/h The Used aseptic filling line Tetra Pak A3 FLEX 200S up to 7000 l/h provides an advanced solution for the aseptic bottling of dairy products and fruit juices. Consequently, this line fills 200 ml Slim Brick containers, ensuring high production efficiency and maintaining the sterility of the product throughout the entire packaging process. Line Features of the Used aseptic filling line Tetra Pak A3 FLEX The bottling line operates with a capacity of up to 7000 liters per hour, ensuring high standards of safety and quality. Furthermore, the aseptic system prevents bacterial contamination, making this solution ideal for packaging sensitive liquids. Additionally, the line includes a conveyor system that facilitates the smooth transfer of containers between different processing stages, ensuring an uninterrupted workflow. Machines Included in the Line Tetra Pak A3 FLEX 200 ml Slim Filler (year 2006) The Used aseptic filling line Tetra Pak A3 FLEX relies on the Tetra Pak A3 FLEX filler, which aseptically fills 200 ml Slim containers. Moreover, this machine utilizes an advanced sterilization system to guarantee the microbiological safety of the packaged product. The filling process ensures precision, thereby minimizing waste and maintaining accurate dosing. Tetra Pak Straw Applicator 22 (year 2009) The Tetra Pak Straw Applicator 22 automatically affixes straws to 200 ml Brick containers. As a result, its integration into the production line enables precise and fast application, improving the product’s ergonomics for the end consumer. Flow Management and Buffering: Tetra Pak Accumulator ACHX30-0500-47M (year 2010) The ACHX30-0500-47M accumulator optimizes production flow by regulating container transport between different processing stages. In addition, this component ensures a continuous workflow, preventing interruptions and maintaining a consistent production rate even when downstream machinery operates at variable speeds. Tetra Pak Cardboard Packer 70 (year 2003) The Tetra Pak Cardboard Packer 70 packages Brick containers into transport cartons. Consequently, the automated system enables fast and efficient packaging, protecting units during transportation and facilitating distribution logistics. Aseptic Filling Process in the Used aseptic filling line Tetra Pak A3 FLEX The entire system performs aseptic filling, a technology that maintains product sterility without requiring refrigeration. Specifically, the process sterilizes the container before filling, preventing bacterial contamination and ensuring an extended shelf life. Iaedpfov Ew Iqjx Ag Uol Safety and Compliance The Used aseptic filling line Tetra Pak A3 FLEX incorporates advanced safety systems to protect both operators and the product during processing. Additionally, each machine complies with the sanitary and hygiene regulations required by the food industry, ensuring safe production in line with international standards.

Condition: used, Used end of line TMG up to 1200 box-hour Case Erector with Hot Glue Sealing Firstly, the TMG case erector features hot glue bottom sealing. It includes, notably, a Nordson glue heater. This allows for the formation and sealing of various carton sizes. Additionally, the machine has a painted iron frame. It also comes with safety protections. Importantly, it is capable of producing about 1200 cartons per hour. This equipment complies with CE standards as of 2018 and is provided with a manual. Consequently, this offers an efficient packaging solution. Case Packer with Mechanical Movement Isdpfjvgt N Tsx Ag Uoal Moreover, the TMG case packer has a mechanical movement on axes. It’s designed for precision and adaptability. It can have, for example, two bottle grab heads (6+6) or one with 12 heads. This setup accommodates different bottle diameters. Furthermore, the entry bench is made from stainless steel, indicating a robust machine. With a rate of about 480 cycles per hour and equipped with safety protections, it adheres to 2018’s CE regulations. Case Sealer for Efficient Sealing of the End of line TMG Furthermore, the TMG case sealer ensures accurate top sealing with hot glue. It includes an automatic carton separator. A pneumatic piston operates the rear flap closure. It allows for manual adjustments for various carton sizes. Equally important, it achieves a rate of 1200 cartons per hour. This machine emphasizes sealing efficiency and reliability. With lateral safety protections, it meets the 2018 CE standards and is also provided with a manual, presenting an optimal solution for end-of-line operations. Conclusion of the End of line TMG Lastly, choosing “Used end of line TMG up to 1200 box-hour” machinery is strategic for enhancing packaging efficiency. Furthermore, the integration of a case erector, packer, and sealer meets not only safety standards but also offers operational flexibility. These machines are ideal for enterprises aiming to boost productivity and uphold high-quality benchmarks. In summary, TMG’s technology features comprehensive safety and operational efficiency, effectively addressing the demands of the bottling industry and ensuring top performance and reliability over the long term.

Condition: used, operating hours: 500 h, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Iasdpfx Agevgud Se Ujl Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.