Used Cold Welding Machine for sale (67,537)

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Knjdjt Hw D Dspfx Afkoa Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 480 mm, total height: 2,040 mm, total width: 1,750 mm, stroke length: 460 mm, total length: 5,177 mm, column diameter: 90 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 9,500 kg, clamping force: 2,000 kN, power: 18 kW (24.47 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Italpresse IP 200 SC die-casting machine, manufactured in 1997. Type: IP 200 SC Manufacturing number: 2449 Year of manufacture: 11.1997 Wiring diagram no.: 147081052 Operating voltage: 400 V Mains frequency: 50 Hz Auxiliary power supply: 110VAC–24VDC Control voltage inputs: 24 VDC Control voltage outputs: 24 VDC Power consumption: 18 kW Installed power: 23 kW Enclosure protection class: IP55 Hydraulic pump: Vickers 4525V42A17 – 86DD 22R Pressure accumulator TÜV certificate: Last inspection in 2018, next inspection due on 01.08.2028. In recent years, extensive investments have been made in the technology to ensure reliability: 2024: Installation of a new column including nut. Kjdezlw N Rspfx Afkjna 2023: Replacement of various wear parts (column wiper, slide rails/slide shoes including wiper) as well as complete seal kits for the closing cylinder and multiplier. 2021: Installation of new pump inserts for high and low pressure. The machine will be sold including a Gauss VS1 dosing unit with a separate, compact control panel and a gas-operated melting furnace with a 200-liter crucible and a Hindenlang gas burner (type HO-3). Original manual and complete electrical and pneumatic diagrams are available. The machine is currently still in active production. Since it is in operation, the operating hours cannot be read exactly, but an inspection under power is possible at any time by arrangement. The machine will be disconnected at the end of September / beginning of October. If you have any questions or require further information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 Knedpfx Afszd Rmgokea - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2024, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 241118-5470, type of input current: three-phase, total height: 1,050 mm, total width: 690 mm, total length: 1,020 mm, input voltage: 400 V, overall weight: 215 kg, warranty duration: 11 months, type of cooling: water, electrical fuse: 25 A, laser power: 2,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, Equipment: CE marking, documentation/manual, type plate available, For sale: FANTECH LWG 4.0 EXPERT 2000W handheld laser welding machine, manufactured in 2024 and only lightly used since July 2025. 3 in 1 machine - welding, cutting, cleaning. Kedpfx Ajzvalijfksna Should you have any questions or need additional information, please feel free to contact us by message or phone. We will be happy to assist you.

Condition: good (used), - Capacity 100 kVA Knsdpfjykcnqox Afkoa - Pneumatic - Throat depth 570 mm - 380 V

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik Knjdpfeug Unfjx Afkea - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Ksdpfxeznwq Te Afkona

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Year of construction: 2021 Knedjzmxvhepfx Afksa New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG Knodezmxuwopfx Afksa

Condition: used, Year of construction: 1996, machine/vehicle number: 7037, equipped with an ABB IRB6400F removal robot, year of manufacture: 1997, serial number: 1318, inventory number: 073005700, WOLLIN spray unit, casting automation, control system, touch panel, cooling tank, machine platform, belt conveyor, 1 ABB industrial robot as a spare parts dispenser. Knjdozhax Tjpfx Afkoa

Condition: used, Year of construction: 2004, machine/vehicle number: 257253, Clamping force: 13,000 kN, total weight: 69,000 kg, including spraying unit WOLLIN, deburring press REIS TKP3, serial number: 181013, year of manufacture: 2004, weight: 680 kg, industrial robot REIS V60, serial number: 541010, year of manufacture: 2004, machine weight: 1,950 kg, melting and holding furnace STRIKO WESTOFEN W1200SL Pro, year of manufacture: 2004, serial number: 7961, furnace chamber volume: 970 dm³, empty weight: 3,100 kg, heating capacity: 22 kW, machine out of service, not ready for operation. Kodpfx Afozhaydokena

Condition: used, Year of construction: 1992, machine/vehicle number: 6597, Revision status: 2005, clamping force: 320 tons, melting and holding furnace DOGUS MACHINE EMHF-300/45, year of manufacture: 2020, heating capacity: 45 kW, diameter: 1,320 mm, height: 1,500 mm, casting automation, spray device WOLLIN LSC1, year of manufacture: 2014, serial number: 1009. Knsdpfx Aezhaykofkea

Condition: used, Year of construction: 2008, machine/vehicle number: 311504, equipped with melting and holding furnace STRIKO WESTOFEN W900SL Prodos XP, year of manufacture: 2008, serial number: 10406, furnace chamber volume: 8290 dm³, unladen weight: 3,200 kg, heating capacity: 22 kW, handling robot SPESIMA Gripmat 2, year of manufacture: 2008, serial number: 210430, machine weight: 1,400 kg, casting automation, spray unit, articulated chain conveyor, length: approx. 350 cm, conveyor width: approx. 100 cm, protective enclosure, control system, machine platform, injection unit defective. Kedpfezhax Hex Afkjna

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm Ksdjykvdlepfx Afksna - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Built in 1994, modernized by the machine manufacturer KUKA in 2012. The system features a facing unit, a flanging die, and a tube conveying unit for unloading the welded components. We can adapt this system to meet customer requirements. A complete retrofit is also possible. Kedjx I Efbjpfx Afkjna The machine is assembled and can be demonstrated. We can also manufacture your friction welding joints for you, up to a clamping force of 300 tons. Feel free to contact us!

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. Knodpfxsv Uzf Ee Afkja We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Knsdpfjwyktnox Afksa Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Year of manufacture: 2007 YAG laser Power: 4.5 kW Laser power: 90 W Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and stand Weight: approx. 170 kg Knsdpfx Asy D Nlqsfkoa Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Furthermore, an error message is displayed indicating that the fiber optic cables need to be checked.

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested Rated voltage 400V Rated power 60 kVA at 50% duty cycle Short-circuit current 22 kA Welding current 17.6 kA Fuse rating 125A Outreach 420 mm Electrode force 470 daN Cylinder with pre-stroke Kedpfoh N Sd Uox Afkena Total stroke 80 mm Double stroke 60 mm Electrode cone MK2 Lower console, height-adjustable by approx. 300 mm Welding control TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses renewed - electrode holder new - original documentation / operating manual available - machine inspection with confirmation 07/2026 - weight approx. 330 kg Demonstration and inspection by appointment only, Commissioning and training at the customer's site possible for an extra charge The machine is located in Dresden, near the A17 motorway. And we always have a suitable cooling unit in stock – of course, for an extra charge ;-)

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Knjdpfx Afjx A A Exskea Manufacturer: Amtech Model: Ultraweld-40 (R4A actuator) Includes manual

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA – Timer Kodjvbr Dlspfx Afkona – 380 V

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Kjdpex E Rd Djfx Afkona Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: used, Year of construction: 2011, Control Siemens Sinumerik 840D sl centre height 1.150 mm z-axis 1.559 / 307 mm x-axis 16 - 80 mm Swing circle diameter 92 mm roll spindle turning speed range 0 - 3.000 U/min Rolling mill roll clearance - axial 0,025 mm feed speeds infinitely variable 0 - 30.000 mm/min rapid traverse 30.000 mm/min Swivel angle range ±3,2 ° Max. speed - main spindle 375 U/min piston stroke 400 mm diameter of piston 90 mm with effective piston area 63,6 cm² In our assessment, the machine is in good used condition and can be inspected under power by appointment. Knedjzdk Ikepfx Afksa Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: defective spare-parts repository (used), functionality: not functional, Manufacturer: DALEX PMS 11-4 Arm length: 350 mm Ksdpfx Afezp Iazekena Power: 100 kVA The machine is out of service, and its condition is unknown.

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Kedpszp H Ukefx Afkona Arm length: 300 mm Power: 200 kVA The machine is out of service, and its condition is unknown.