Used Cold Light Source for sale (19,595)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension Hodpfxey Tvuwj Ac Tot 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, Year of construction: 1991, We offer the following machine: - with roller conveyor --> Outfeed: 4 m --> Infeed: 3 m Technical details: Hsdjzgvqpspfx Ac Tet - Saw blade diameter: 450 mm - Cutting diameter: 150 mm - Saw blade arbor: 50 mm - Table size: Ø 700 mm - Table rotatable: 360° - Electric model - Voltage / Frequency: 400 / 50 V/Hz - Compressed air connection: 6-8 bar - Total power consumption: 3.6 kW - Machine weight approx.: 1170 kg - Machine dimensions: 1.5 x 1.0 x 2.35 m (L x W x H) Circular saw, semi-automatic - Profiling circular saw machine - Undercut saw for cutting materials: steel as solid material, tubes, and profiles, taking into account the cutting range. Cutting speed depends on the material/workpiece to be cut. Miter cut: 30° to 90°

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Hsdpfsywnvnjx Ac Tot cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm Hjdpfx Ajfmck Hsc Tjt turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 0,8x0,9x1,95 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic function: 1. Saw starts 2. Clamp material 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Hodpfxsd Iin Rj Ac Tet ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. Hodpefg Rlaefx Ac Tjt · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: used, Year of construction: 2010, saw blade diameter 315 mm dimensions of saw-blade 350 x 40 x 2,5 mm cutting diameter 90 mm capacity 90 degrees: flat 150 x 90 mm capacity 45 degrees: round rechts & links 90 mm capacity 45 degrees: flat rechts & links 105 x 90 mm capacity 60 degrees: round 90 mm capacity 60 degrees: flat 75 x 70 mm cutting speed 33 / 66 m/min total power requirement 1,8 kW weight of the machine ca. 340 kg dimensions of the machine ca. 900 x 800 x 1700 mm Features: Hsdpfxsv Td Hve Ac Tjt - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions

Condition: used, mileage: 46,448 km, power: 77 kW (104.69 HP), first registration: 02/2021, fuel type: diesel, overall weight: 2,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,964 mm, loading space length: 2,411 mm, Equipment: ABS, central locking, soot filter, Errors and prior sale excepted! Internal number: 0898. JA78985 ----EQUIPMENT * Cargo area floor: Hardwood with anti-slip coating * Cargo area protection package "Heavy Duty" - Hardwood cargo area floor (Delignit) with anti-slip coating incl. 3 recessed airline rails and plastic side wall lining (high) * Transmission: 6-speed manual * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag, driver side * Exterior mirrors, manually adjustable (2) - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display * Roof, flat * Double-wing tailgate with 180° opening angle (without window) * Tachometer * Electronic stability program (ESP) with traction control (TCS) - hill start assist - crosswind assist - safety brake assist - rollover protection * Cargo area floor: Deletion of vinyl floor covering * Power windows, front - with quick-down/up function for driver side * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Generator, 220 A * Headlights: Halogen headlights with daytime running lights * Glove compartment with lid * Interior lighting with delay function * Cargo area lighting with activatable delay shutdown - after 30 minutes * Steering column, adjustable in height and reach * Emergency brake assist incl. hazard warning lights - pulsating flashing of brake lights during heavy braking * Particulate filter: Diesel particulate filter * Radio: Radio preparation (wiring, 4 speakers) (Custom) * Sliding door: Sliding door, right Hedpshznucefx Ac Tot * Mud flaps, front and rear * Side protection strips * Power steering * Seat belts - seat belt pretensioners and load limiters, front - warning system for unfastened driver's seat belt * Seat package 3 - Partition without window (Custom van base) - Driver's seat, 4-way adjustable (fore/aft, backrest, tilt, height) - Single passenger seat, 2-way adjustable (fore/aft, backrest) - Headrests, height-adjustable - Interior armrest for driver - BASIC seat upholstery: Fabric - Partition without window * Socket: 12-volt socket * Tie-down points 8 * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control * Auxiliary heater, electric ... and more ----The vehicle is in its original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: good (used), Year of construction: 1998, saw blade diameter: 300 mm, For sale is an MEP Tiger 300, a high-quality circular saw for metalworking. This machine was built in 1998 but is in good condition. It is perfect for workshops and production environments that require a reliable and precise sawing solution. Machine Features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of Manufacture: 1998 Saw Type: Semi-automatic/Manual Circular Saw Saw Blade Diameter: 300 mm Cutting Capacity: Suitable for round materials, square profiles, and miter cuts Cutting Angles: 90° and 45°, with miter cuts in both directions Hsdpfx Acev Tlcre Tot Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant Supply: Integrated cooling system for better cut quality and extended saw blade life

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm turning speeds 29 / 58 m/min. total power requirement 4,2 kW weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed Hsdjyrhurspfx Ac Tot - hydraulic workpiece clamping - 4 spare saw blades

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Hsdpfx Aoy Ra D Dsc Tet Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch Hodpfxeynngao Ac Tet 4.7 kW 600 mm 1000 mm 1400 mm 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Year of construction: 2021, condition: used, General information Year of manufacture: 2021 New: No Registration number: 41-WBB-3 Serial number: 200210463 Drivetrain Drive: Wheel Make of engine: Kubota Fuel tank: 110 litres Weights Empty weight: 985 kg Functional Extendable superstructure: Yes CE mark: yes Hjdpfxsylyfce Ac Tot Condition General condition: very good Technical condition: very good Visual appearance: very good Trime X-ECO LED Light Pole Year of construction: 2021 Engine: Kubota Lamps: 6x 160W LED Height: 8.5m Weight: 985kg Dimensions: 254x139x242cm Very neat machine, two available. Dutch registration.

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades Hedpfx Aozb Ngzec Tjt --> --> Special price: EUR 4,000.00 net, free on board!

Year of construction: 2000, condition: used, ampere 29,5 protection P 31 fabric-no. 812122 Hodpfx Acevu Hk He Tst frequency 50 Hz weight 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm Hodpfxov R Dxas Ac Tjt SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, saw blade diameter: 400 mm, – 400 mm saw blade – Double miter – 4 pneumatic collets – Automatic safety guard – Mist lubrication system – 1 x 300 cm roller conveyor with length stop – Front door for easy saw blade changes – Air gun Hodpowg Sm Asfx Ac Tet – Safety guard – Documentation – 400 V

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Hodpfxevcqv Ne Ac Tot Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Hsdpex Anl Defx Ac Tjt Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm Hjdpsxaab Sofx Ac Tjt capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Hsdsw Nxyyjpfx Ac Tet KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Hodpfx Ajw N Ua Njc Tot Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.

Condition: new, empty load weight: 6,111 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, loading space volume: 25 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Kögel 3-axle steel tipping trailer | Roll tarp | 25m³, steel tipping body | SAF axles with disc brakes | 1st axle liftable | Tyres: 385/65 R22.5 | Subject to error, input mistakes, and prior sale. Hjdpfxjyhmfns Ac Tjt

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing Hsdpjvbu Awefx Ac Tjt - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Hsdpepy Uzyofx Ac Tjt Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.