Cold saw

Imet Sirio 370 EHI E

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Bedpfxjd Id Ugj Aa Isdh Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Bdodefgpdljpfx Aa Ieh capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway Bedpsxdr Rtefx Aa Iedh - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge Bjdpfoxab Hvjx Aa Iedh * ERCOLINA tool holder

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Bodoyub N Uspfx Aa Ijdh Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: Bodpfjy Ug Epex Aa Iedh X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: good (used), Year of construction: 2009, machine/vehicle number: 87376, Offer 23330 Technical Data: - Semi-automatic sawing machine with hydropneumatic feed - Saw blade feed – vise - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting capacity at 90°: round 110 mm; flat 120 x 80 mm Bdjdpsxx R Tijfx Aa Ieh - Cutting capacity at 45°: round 80 mm; flat 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Infinitely variable saw blade feed - Pneumatic material vise - Electric foot switch - Pneumatic connection: 6 bar - Drive: 400 V / 1.4 / 1.8 kW - Coolant system - Space required: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: round 110 mm capacity 60 degrees: round .0 mm capacity degrees: square 95 x 95 mm capacity degrees: square 95 x 95 mm Bjdjxabd Ijpfx Aa Iodh capacity 60 degrees: square x mm capacity degrees: flat 180 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: flat x mm

Condition: ready for operation (used), Year of construction: 2009, ERCOLINA MB 42 / Mandrel-less pipe bending machine Bdjdjznm Nfspfx Aa Ish -CE marking -Year of manufacture: 2009 -Bending capacity / steel pipe: 42.4 x 3 mm -Max. pipe diameter, aluminum / copper: 54 x 2 mm -Bending capacity, furniture construction pipe: 48 x 1.5 mm -Solid material up to 30 mm -Max. bending angle: 210 degrees -Electronic control with digital display -Max. 30 program memory slots -Programs with 9 bending operations -Overload protection / Yes -Operation: Dual foot pedal (bending - return) -Max. bending speed: 2 bends/min -Includes 1 tool -1.1 kW -Foot switch -Documentation Dimensions: L x W x H 0.5 x 0.6 x 1.2 meters / Weight 100 kg Errors and omissions excepted.

Year of construction: 2023, condition: new, ProMax Professional Series CNC CNC PLASM PAPER BURNING machine TECHNICAL PARAMETERS working width 2000 working length 4000 ventilated 8-section table travel speed up to 50 m/min Bdsdonfvlvspfx Aa Ish KEY EQUIPMENT DELTA servo drives X axis support with double rails quick START- preparing machines for cutting under 1 minute planetary gears helical bevel bars in class 6 touch screen monitor with industrial computer remote control sectional extraction table with pneumatic cylinders anti-collision system CS- system that protects the torch from collision CLS system of central lubrication double basing of Y axis laser marker indicating the torch position SC system - safety system We offer other dimensions of tables.