Used Cold Light Source for sale (20,714)

Condition: good (used), LED high bay light, light fixture, high bay light, industrial lighting, industrial lamp, linear light, LED spotlight, high bay low beam light -Manufacturer: lichtline, LED high bay light with swivel arm -Power: 150 watts 5000K -Swivel arm: Length 3860 mm -Dimensions: 3860/340/H210 mm Lhodpfxjh N Tife Abysn -Weight: 56 kg

Condition: good (used), Reflective light barrier, reflective light sensor, light barrier, light sensor -Manufacturer: Sick, Light sensor light barrier type WL27-2F431S09 -Connection: DC 10-30 V -Number: 11 sensors available Price: per piece - Dimensions: 130/80/H25 mm -Weight: 0.1 kg/pc. Lhsdpfx Abjiiigloysn

Condition: good (used), Year of construction: 2012, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Mosca, belt conveyor with adjustable base from GF strapping machine -Speed: frequency controlled, up to approx. 94 m/min -Strap width: 500 mm -Conveying length: 1000 mm Lodpfsq Ei Dqex Abyshn -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate -Light barrier: 2 sensors, distance adjustable see photos -Quantity: 1x conveyor belt available -Transport dimensions: 1020/960/H900 mm -Weight: 88kg

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min Lhsdpfxep E Eglo Abyjn working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), Reflective light barrier, optic sensor, light sensor, light barrier, optical sensor, photoelectric sensor, reflective light switch, light switch, photoelectric sensor Manufacturer: Banner, Photoelectric sensor, unused, original packaging -Type: Q85VR3DL-T9-B Lsdjm Ui Itopfx Abyshn -Cardboard dimensions: 130/90/H50 mm Total weight: 0.3 kg

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Lhsdpfx Aollvpwjbysn Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Options: Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Feel free to contact us for a non-binding quote!

Year of construction: 2025, condition: new, Benefit from our hydraulic modules with integrated buffer tanks – the perfect solution for modern chilled water systems. The central buffer tank enables stable system performance, reduces pressure fluctuations, and improves the availability of your system. Example configuration: Lhsdpfxohtfhao Abysn Hydraulic module with a 5000-liter buffer tank Integrated dual pump for redundant operation or increased flow rate Hydraulic separation between primary and secondary circuits Targeted pressure and temperature control to optimize overall efficiency Space-saving housing design for easy integration into the existing process. We would be happy to prepare a customized offer for you, including sizing and delivery time.

Condition: used, Machine light, machine lamp, workroom light, recessed light, LED recessed light, ceiling recessed light -Manufacturer: varialux, recessed light with LED 24V / 17W 2 pieces unused Ovp -Type: 9282-710 -Connection: WAGO connector 5-pin -Quantity: 2 boxes available -Price: per box Lhodpfx Abor Htnkjyen -Dimensions: 710/250/H120 mm -Weight: 3.1 kg/carton

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg Lsdpfx Absr R Abpeyshn

Condition: good (used), Reflective light barrier, light barrier Lodpfx Aob A Hcljbyshn -Type: WT36-P710E02 -10-30 V DC -Weight: 0.2 kg

Condition: good (used), Reflective light barrier, light barrier -Type: WL 25-322 Lhjdpfxob A Hzao Abyen -24 V AC 48-62 Hz 6 VA -Weight: 2 kg

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Ljdpfozugnzex Abyshn Good condition

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Manufacturer: Ceag, Cooper Safety LED emergency exit sign with 3 pictograms, unused, original packaging Lhedezmubyspfx Abyjn -Type: SV EURO 1-3/D -Connection: 230 V -Cardboard dimensions: 360/220/H110 mm -Weight: 1.8 kg

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Lodpfszafi Nsx Abyohn Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm Lhodpszuzw Dofx Abyon for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids Ljdpfjztc Nfjx Abyshn • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: new, Year of construction: 2017, height / mm working width / mm distance to reflector / mm Lodpeyn R Rusfx Abyehn

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can be amortized in the shortest possible time. Lhodpjwzv Hcefx Abyon An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: excellent (used), sunroof, glass roof, car glass roof, tilting roof, pop-up sliding roof -Manufacturer: Monza, sunroof type Air Light 1 Ovp -Size: 780 x 410 mm -Dimensions box: 780/410/H55 mm -Weight: 5.3 kg Lhedpfxsv Avyte Abyon

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 4.7 kW 600 mm 1000 mm Lsdpfjynngaex Abyshn 1400 mm 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Condition: good (used), Machine light, machine lamp, work area light, system light, compact light, control cabinet light Lsdpexv Sncsfx Abyshn -Manufacturer: Rittal, LED 1200 system light with motion detector -Type: SZ 2500.300 -Power: 13W / 32 x 0.36W/LED -Number: 5x light fixtures available -Price: per piece -Dimensions: 440/90/H40 mm -Weight: 0.5 kg/piece

Condition: used, Reflection light barrier, reflection light scanner, light barrier, light scanner -Manufacturer: Sick, retro-reflective sensor type WT36-P410 -Connector: DC 10-30V -Number: 2x sensors available -Price per piece Lhjdpfx Abjiiig Toyon -Total dimensions: 150/100/H35 mm -Weight: 0.3 kg/pc.

Condition: good (used), Year of construction: 1996, Reflective light barrier Lhjdpfx Ajb A Nbaebysn -Connection: 24 V -Permissible ambient temperature: -20 - 50 °C -Price: per piece -Quantity: 2 available -Weight: 0.4 kg

Condition: excellent (used), Machine light EBLFE 136, housing made of galvanized sheet steel, glass diffuser, Fresnel diffuser -Connection rating: 24 volts Ljdpfx Abjfhdzueyehn -without a switch -Number: 2 lights available -Price: per piece -Weight: 5 kg

Condition: good (used), Machine is in good working condition. Lhsdjqzypmepfx Abysn