Used Cnc Working Center for sale (54,887)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: Iedpfsw Hg Nlex Aa Ijth * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min Iedpfx Ajwp D Nbsa Ioth number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Itjdpjzc D Hfjfx Aa Ish Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX Iedpfszc D Ensx Aa Ioth X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Iodpjzc D D Rjfx Aa Ioth Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Itedpfx Aszc D Atea Ijh Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t Itsdpfxezc D Ags Aa Ish A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Iedpfx Aajzc D Aao Ioth Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). Ijdpfx Aasycpxge Ijth In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC-Steuerung Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm Itsdpfezc Dzpsx Aa Ieh T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Isdpfx Aaozc Dzij Isth Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany Itjdpfszc Dyrjx Aa Ioh X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Itedpfozc Dylsx Aa Ijh Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: excellent (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, rotational speed (max.): 5,000 rpm, Control: HEIDENHAIN Plus iT with Turn Plus Iodpfx Aasy Nizis Ijth Turning length: 1175 mm (with tailstock 1100 mm) Tool holder: HSK 63A (DIN 69893) Tool magazine: 1 x 36-position disc magazine

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Isdpfx Ajzcwt Sja Ijth Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart Itsdpfxezablts Aa Ioh * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 16i-MB, overall weight: 1,700 kg, spindle speed (min.): 500 rpm, spindle speed (max.): 30,000 rpm, spindle motor power: 10,000 W, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, input current: 25 A, CNC Machining center WILLEMIN W 408MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control: FANUC 16i-MB Number of axes: 5 Stroke X axis: 250 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 300 [mm] Feed rate on X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 3.7 [kW] Angular C axis stroke: 360 [°] B axis swivelling stroke: 115 [°] Spindle type: HSK-E40 Min. spindle speed: 500 [rpm] Iodpfx Aaszcx Dfo Ijth Max. spindle speed: 30000 [rpm] Spindle power: 10 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 95 [mm] Max. tool diameter: 63 [mm] Lubrication tank capacity: 80 [l] Collant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 1700 [Kg] More information upon request.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, EMCO MAXXTURN 65 – Technical Data CNC control: Siemens SINUMERIK 840D sl Programming system: ShopTurn Bar capacity: 65 mm Spindle bore: 73 mm Main spindle: 29 kW, 250 Nm, 5,000 rpm Iedpezcz R Ujfx Aa Ioth Counter spindle: 5,000 rpm C-axis: Main and counter spindle Tool turret: 12-position servo turret Tool interface: VDI 30 Driven tools: 12 stations Speed of driven tools: up to 6,000 rpm Y-axis: ±50 mm Max. turning diameter: 500 mm Rapid traverse X/Z: 30 m/min

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turning and milling center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Ijdpfozfguvex Aa Ioth Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter, main spindle: 66 mm Bar diameter, counter spindle: 43 mm X-axis: 260 mm Y-axis: +/- 50 mm Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Accessories: - Tool measurement system - Chip conveyor - Bar feeder LNS - Workpiece collection tray

Condition: used, Year of construction: 2000, Gildemeister CNC universal lathe Type/Model: CTX 600 E Condition: Used Operating hours: 99,831 h Year of manufacture: 2000 Technical data Swinging diameter: 680 mm Distance between centers: 2000 mm Spindle speed: 2800 rpm Chuck: Ø 315 mm Tool turret: 12 stations; incl. 3 stations for driven tools Tool holder: VDI 50 Tailstock: NC-controlled Dimensions approx. 5560 x 240 x 213 mm Weight approx. 10,000 kg Iodpfjzdrrkox Aa Isth Equipment: - Power chuck, type SMW Autoblok 315 BH-FX, Ø 315 mm - Control system: Heidenhain CNC Pilot

Condition: used, Year of construction: 2017, Technical details: turning diameter: 340 mm turning length: 1000 mm control: OSP 300 LA swing diameter over cross slide guide: 470 mm swing diameter max. over bed cover: 580 mm travel -x axis: 260 mm travel -z axis: 1065 mm rapid travel - longitudinal/face: 30 / 25 m/min bar material dia.: 52 mm spindle diameter: 80 mm Spindle RPM: 5000 1/min spindle drive: 22 / 15 kW Iodpjzb Rh Hefx Aa Ieth turret stations / rotary tool stations: 12/12 VDI 40 : 7 kW speed of driven tools: 6000 1/min Tailstock Travel: 1015 mm tailstock quill taper MT: 5 total power requirement: 38,7 kVA weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4 x 2,5 x 2 m Accerories Chip conveyor Signal lamp 2 colors manual tool eye High precision Turning and Milling Centre with turret for milling tools and main spindle with C- axis. The Stiefelmayer mandrel for inside clamping of hollow shafts can b e replaced by regular 250 mm Kitagawa chuck. Machine can be shown undeer power *

Condition: excellent (used), Year of construction: 2015, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, Itjdjw I Tniopfx Aa Ieh 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location Isdpszd Rbdefx Aa Ieth SK 40

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: Ijdoy Hwn Eepfx Aa Isth - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Travel range Z = 400 mm Y = 200 mm X = 410 mm Power / thrust force Z-Y 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X 4.8 kW / > 550 daN X-Y-Z Travel speed 40 m/min (linear motor option = 50 m/min) X-Y-Z-W Acceleration 8 m/s2 / 0.8 g (linear motor option = 10.4 m/s2 / 1.1 g) X-Y-Z-W Resolution 0.0001 mm MAIN SPINDLE + C1 Power 7.5 kW Torque / peak 22 / 28 Nm Measuring system direct Resolution 0.0001° Accuracy 0.001° Bar passage Ø 32 mm Turning spindle speed 72,000°/min Turning clamping force 4,900 N at 6 bar AXIS B (TILT AXIS OF TOOL HOLDER SPINDLE) Ijdpoyf Angefx Aa Ijth Power 4.3 kW Torque / peak 119 / 226 Nm Angular travel -25° / +115° Measuring system direct Resolution 0.0001° Accuracy 0.001° Rotational speed 36,000°/min Supporting torque 200 Nm TOOL HOLDER SPINDLE Power 5 kW Torque 6 to 800 min-1 Max. speed 30,000 min-1 Clamping force of the tool holder 2,000 N Blocking torque mechanical blocking via straight-tooth gearing Tool shank taper HSK 40 (A or E) Tool clamping power 1000 daN TOOL CHANGER Number of stations 30 (for HSK 40) CNC control Fanuc 30i/31i type Y-axis (transverse axis) Travel 200 mm Power 4.8 kW Feed power 240 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Z-axis (longitudinal axis) Travel 400 mm Power 7.2 kW Feed power 360 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Includes coolant unit 8 kW and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14’’ screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION with integration of an indexing system (8 positions) on the tool holder spindle, transformation of the tool magazine for HSK40-A tool holders, increase of the spindle speed to 5500 min-1 4-POSITION PART RECOVERY UNIT “PRM” FOR MACHINING THE 6TH FACE: In idle state, the unit is located protected under the main C1 spindle. The recovery unit moves on the W-axis, which is parallel to the C-axis. Max. speed W-axis: 40 m/min. Travel on W-axis: 310 mm. With 2 vices – power at 5 bar: 3500 N 1 tailstock INCREASED SPINDLE PASSAGE increase from 1 to 50 mm (main spindle) TOOL MEASUREMENT DEVICE “RENISHAW” T27 Measurement of the length of the turning tool. Routine detection by M-code. Automatic tool breakage monitoring. TOOL MAGAZINE EXTENSION Increase in the number of tools from 30 to 60 stations COOLANT THROUGH THE SPINDLE 100 bar, 25 L/min, 400 L tank ADAPTATION AND PREPARATION OF HP THROUGH THE MILLING SPINDLE Mechanical and electrical integration of the turning clutch. PART UNLOADING CONVEYOR Output to the left of the machine PAPER BAND FILTER SYSTEM CLAMPING SYSTEM FOR F-48 CLAMPS ADAPTATION FOR W-20 CLAMPS PREPARATION FOR INTEGRATION OF A BAR FEEDER Subject to errors and omissions, the technical specifications are provided without commitment.