Used Cnc Vertical Borer for sale (14,248)

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Dusdpfx Aey Ey Tbjkkjw Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Dujdpfxstrhq Hj Akkjw Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors Dsdpfx Aew Nklhekkouw - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Dsdpfxjygtcqs Akkouw Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008200, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 21 Total number of tool changer positions: 5 Djdpfsx A Ti Uox Akkjuw

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 11 KW Dodpfx Akowuz Tuokjuw Number of controlled axes: 3 axes Total number of drilling spindles: 36 Total number of tool changer positions: 10

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm Dedexp Na Nepfx Akkjuw SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Dusdpfxoy N Du Dj Akkjw Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Dusdpfxszavyfj Akkow

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Dujdpeufp Svofx Akkew

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Parts shown by hand not come. Chucks on the table are not included. Machine vices not come. Dusdpfx Aksmnp D Iskjw

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Dsdpjzb D Rnefx Akksuw

Year of construction: 2004, condition: ready for operation (used), Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 8.3kVA, rated current: 12A, weight: 3t, equipment: rotary quill, controlled C-axis, CNC conversational control system with 4 axes, hand-held control unit, tool holder: Erowa ITS quick-clamping chuck, 20-position electrode changer, paper cartridge filter. An on-site inspection is possible. Dsdpfx Aezadk Ejkksuw

Year of construction: 2002, condition: ready for operation (used), Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 5kVA, equipment: rotary spindle, controlled C-axis, CNC conversational control system, Handy Genius remote hand-held control unit, tool holder: Erowa ITS 007523 quick-clamping chuck, 16-position electrode changer, extraction unit, C-module Z+K, automatic CO₂ fire extinguishing system, paper cartridge filter, electronically controlled heat exchanger, high-pressure flushing system (defective), rotary head up to 750rpm and tube guide. An on-site inspection is possible. Duedpfezadlpox Akkew

Condition: used, machine/vehicle number: 008557, X axis working area: 3050 mm Y axis working area: 850 mm Dusdpfxezcbhgs Akkew Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control Siemens travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. Dedpfx Akox Szlrjkouw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: used, Year of construction: 2019, travel -x axis 900 mm travel -y axis 200 mm travel -z axis 800 mm B-axis swival range ° positioning accuracy C: 9 '' control SIEMENS number of spindle speeds 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! Dsdex Szmvepfx Akkjuw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Dusdpjyybpmjfx Akkow Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured Duedpfx Aksd I R E Nokew • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Djdpfsy Ed A Hsx Akkjuw Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Dodpfxjy H Igre Akkouw Main spindle motor: 11 kW Video of machine in operation available

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Duodsycplmspfx Akkow

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 rapid traverse x/y/z: 18 / 18 / 13 m/min drive capacity – spindle motor: 15 kW Dodpswyna Sofx Akkouw tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Djdpfx Ajy Igbqokksuw

Condition: used, GEHRING Lifehone 600 is a CNC vertical honing machine, engineered for precision, high accuracy and reliability. Capacities: min diameter 3 mm, max 90 mm, max honing length 600 mm; total stroke 600 mm. Technical specs: spindle speeds up to 4500 t/min; stroke/feed speed up to 60 m/min; voltage 3x 400 V 50 Hz; machine weight about 2500 kg; overall dimensions L2600×W2800×H3100 mm. Equipment: coolant system and paper filtration system. Achieves tight tolerances; typical applications include automotive, aerospace, machine tools, medical and watchmaking. Djdpfxsyxnyco Akkjuw