Used Cnc Milling for sale (15,434)

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS Gedpfx Aswidy Tjg Eett FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min Gtjdexz Aygjpfx Ag Est

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A Gtodpfx Aox I Shpjg Eet travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm Gtsdpfx Asttckmeg Eet travel -z axis 430 mm spindle speed: 3500 1/min spindle bore 75 mm bar diameter 51 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Condition: excellent (used), Brand: CORREA Model CF-17 Cnc : HEIDENHAIN 360 Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Gtodpfx Agsxcy D Ss Eot Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-2750 rpm Range : 5-5000 Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Condition: used, Year of construction: 2001, Technical details: Gtedow D Hh Aopfx Ag Eet turning diameter: 33 mm turning length: 330 mm control: 840 total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours *

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING Gjdpoxfa Ipsfx Ag Eett

Condition: excellent (used), Year of construction: 2011, CNC Turning-Milling Center MTCUT T20MC Year of manufacture: 2011 Driven tools available Accessories included Technical data: Working area • Max. swing diameter: Ø 470 mm (18.5”) • Max. machining diameter: Ø 280 mm (11.02”) • Max. machining length: 508 mm (20”) • Bed slide and inclination angle: 45° Bed • Max. longitudinal travel (Z-axis): 520 mm (20.47”) • Z-axis servo motor: 1.4 kW (1.8 HP) • Z-axis rapid traverse: 30 m/min (1181”/min) • Max. cross travel (X-axis): 176 mm (6.93”) Gedpfx Aoxtnhaog Ejtt • X-axis servo motor: 1.4 kW (1.8 HP) • X-axis rapid traverse: 30 m/min (1181”/min) Spindle • Main spindle bore / draw tube diameter: Ø 62 mm (Ø 2.44”) / Ø 52 mm (Ø 2.04”) • Spindle nose: ASA A2-6 • Taper angle of the bore in 8" spindle: 1/20 • AC main spindle motor: FANUC 7.5/11 kW (10 HP / 15 HP) • Speed (8" main spindle): Standard 4500 rpm Tool turret • Type: Hydraulic clamping device • Boring bar diameter / position: Ø 32 mm • Turning tool cross-section / position: □ 20 mm × 20 mm / □ 25 mm × 25 mm Tailstock • Quill diameter: Ø 75 mm (2.95”) • Stroke: 425 mm (16.73”) • Quill type: Fixed • Quill taper: MT No. 4 • Quill travel: 100 mm (3.94”)

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Gedpfx Asx Tpytog Eett

Condition: excellent (used), CNC Milling Machine PMER type DPM Model: DPM Specifications - CNC Milling Machine PMER type DPM Designation: CNC milling machine X travel: 780 mm Y travel: 410 mm Z travel: 550 mm CNC control: Proto Trak MX3 Spindle taper: ISO 40 Spindle quill travel: 120 mm (manual) Spindle speed: 70 – 3800 rpm Table size: 1270 x 320 mm Max. spindle nose/table distance: 500 mm Min. spindle nose/table distance: 100 mm Tilting head right/left Gtsdpfjx Drybsx Ag Eet Other: Jog handwheel Other: Manual operation possible Other: (using handwheels) or controlled by CNC Machine equipped with lubrication pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2.5 t

Condition: good (used), Year of construction: 2007, Brand : SORALUCE Model : TA 20 Type: BANCADA FIJA Gsdpfx Agot Iwtuj Eett Cnc : HEIDENHAIN iTNC 530 Year : 2007 Table size : 2000 x 800 mm Number of T slots : 4 Slots dimensions: 22 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 20.000 mm/min Spindle type: Universal ISO 50 Turning ranges : 20-3000 rpm Spindle power : 22 kw Hydraulic clamping tools :Included CE fairing :Included Work piece weight on table : 4.000 kg Machine weight: 10.000 kg Electronic wheel : Heidenhain HR-410 Machine dimensions : 6.500 x 3.300 x 2.740 mm Machine equipped with: Magnetic table 1.500 x 600 mm 2 Chip conveyor

Condition: used, Year of construction: 2009, Technical details: rotor dia: 30-500 mm hobbing length: 500-1000 mm total power requirement: 80 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 3,6 x 2,5 x 3,0 m max. module: 8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Gsdpfx Ajv Hrp Ejg Eett Including milling mandrel *

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS Gtodpfxov N D Rte Ag Eet TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min Gjdpsx Hgl Hofx Ag Estt B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: used, Year of construction: 2010, longitudinal traverse (z-axis) 6870 mm cross movement. (x-axis) 920 mm centre distance 6500 mm swing diameter over slide rest 900 mm Control Siemens Sinumerik 840D tool taper CAPTO C8 7352 mm max. workpiece weight 9000 kg tools in tool magazin 72 total power requirement 145 kW weight of the machine ca. 47 t dimensions of the machine ca. 11 x 3,2 x 3,5 m Rotary spindle -Spindle diameter - 320 mm -Spindle bore - 245 mm Main drive: -Max. spindle speed - 1600 rpm -Max. torque at the spindle - 4472 Nm C-axis servo-controlled main spindle: -Max. speed - 20 rpm -Max. torque at the spindle - 3000 Nm -Holding torque of the disc brake - 6000 Nm Gtedoxzuvtepfx Ag Est Tailstock: -Quill diameter - 180 mm -Quill stroke - 200 mm -Quill force (adjustable) - 5400 to 40000 N Tool holder: -AC drive power - 30 kW -Max. spindle speed - 6000 rpm -Max. torque at the spindle - 315 Nm -Travel perpendicular to the X/Z plane (y-axis) - 500 mm [-200/+300]mm -Milling spindle diameter in the front bearing - 100 mm Equipment/accessories: -with internal coolant supply -chip conveyor -paper belt filter system -boring bar with device -measuring equipment -clamping sleeves -tool holders -spare parts -technical documentation

Condition: like new (used), Year of construction: 2013, Machining with diamond tools at feed rates up to 3 mm/min and unit costs up to 56% lower than electrical discharge machining. Maximum travel distance on the X-axis: Gtodpfxex Tpibj Ag Est 200 mm Maximum travel distance on the Y-axis: 400 mm Maximum stroke on the Z-axis: 280 mm Control and software options: SIEMENS

Condition: like new (used), Year of construction: 2023, operating hours: 1,000 h, functionality: fully functional, turning length: 640 mm, turning diameter: 460 mm, spindle motor power: 15,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 640 mm, Driven tool speed: 12,000 rpm Driven tool power: 8 kW 15-position turret Automatic tailstock Tool length measurement Chip conveyor Automatic door Gsdpfx Agjx Sy Dae Eott Robot interface prepared Set of fixed and driven tool holders

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm weight of the machine ca.: 6,5 t Gsdpex Dlhlefx Ag Estt max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: used, MAZAK A12 MEGA TURN CNC ELEVATING RAIL VERTICAL BORER MAKE MAZAK, MADE IN JAPAN MODEL A12 MEGA TURN YEAR LATE 1980 s CONTROL FANUC 6 TB TABLE DIA 1250.0 mm MAX SWING 1450.0 mm MAX CUTTING HEIGHT 1150.0 mm TABLE SPEED 1 - 350 RPM ATC 16 STATIONS PLUS 4 TABLE JAWS Godpfx Ajv N Ek Ujg Eott TOOL HOLDERS SWARF CONVEYOR COOLANT SYSTEM GUARDING

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Gtjdpfx Agsx A Hdfj Eet

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min Gsdpfxevu E R Sj Ag Ejtt rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 1999, x-travel 505 mm y-travel 355 mm z-travel 610 mm control Heidenhain TNC 430 Gtodpfxjxzk N Ns Ag Eot weight of the machine ca. 4000 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 10,240 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,400 h, We offer in good condition DMG Mori DMF 360-11 4-axis milling machine. X-Axis travel: 3600 mm Y-Axis travel: 1100 mm Z-Axis travel: 900 mm Spindle has been changed 2000 hours ago due to short circuit (no crash) HSK-A63 15.000 RPM spindle 46kW / 61.7 hp - 200 Nm Machine has following options: Swivel head Heidenhain Touch probe TS 642 Gtsdpfx Aexqa I Hsg Eot Automatic door Internal coolant 40 bar with paperbelt filter

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Gsdjx A Hl Aepfx Ag Ejtt

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Gedjw Rf Tiepfx Ag Estt Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation