Used Cnc Lathe Price for sale (32,156)

Condition: excellent (used), Year of construction: 2005, operating hours: 1,963 h, functionality: fully functional, machine/vehicle number: 69724, type of input current: three-phase, Please message us with any questions we are aware there is limited information provided. Lajdjxvp E Espfx Aa Eok

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Index ABC (built in 1997) – CNC lathe with MBL Unimag bar feeder Condition: Used, functional Year of manufacture: 1997 Control: Siemens 840C Included: MBL Unimag bar feeder Technical specifications: Max. spindle bore: 61 mm Main spindle speed: up to approx. 6,300 rpm Control: Siemens Sinumerik 840C Spindle mount: A6 or A8 (depending on model) X/Z travel: approx. X = 105 mm / Z = 300 mm Machine weight: approx. 5,000 kg Space requirement (L x W x H): approx. 3,200 x 1,800 x 2,000 mm Accessories: ✅ MBL Unimag bar feeder – for round material up to Ø 60 mm ✅ Collets and clamping devices Laodpfx Aaswl Egas Esk ✅ Technical documentation ✅ Chip conveyors

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm Ljdpfx Ajxxh N Uja Esak DBC Turning Length: 2000mm Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: E2A010, MACHINE SPECIFICATION Maximum swing over bed 440mm Maximum turned diameter 215mm X axis travel 187mm Z axis travel (max. turned length) 420mm Carriage inclination 60° (slant bed) Spindle centre height (from floor) 950mm Spindle nose A2-5 Hole through spindle 64mm Maximum spindle speed 4000 rpm Spindle motor 7.5kW X axis Ballscrew (diameter and pitch) 32mm x 10mm X axis rapid traverse rate 30 m/min Z axis Ballscrew (diameter and pitch) 32mm x 10mm Z axis rapid traverse rate 30 m/min Turret tooling type VDI 30 Turret stations 12 Approximate Weight 4000 Kg Lodpfxsxwk Sps Aa Eoak Machine Equipped with Fanuc 0i-TD CNC Control System Hydraulic 3 jaw chuck 170mm diameter 5 off toolholders Coolant system Lighting Interlocked guarding Manual

Condition: good (used), Year of construction: 2004, Mazatrol control, 77 mm spindle bore, sub spindle, driven tools, chip conveyor, chuck on both spindles Lasdpfx Ajx Dh Axoa Ejk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3750x1400x1750 mm Lsdpfxsv A Huhj Aa Eeak Weight 1600 kg Total power requirement 8 kw

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Lasdox A R U Ispfx Aa Eok Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2014, functionality: unexamined, turning length: 6,500 mm, TACCHI HD/3 105H S CNC Lathe, 1991/2014 retrofit - Siemens 840D CNC - Center height 800 mm - Swing over bed 1350 mm - Swing over carriage 950 mm - Distance between centers 5000/6500 mm - Spindle bore 220 mm - Spindle speed 2 to 720 rpm - Spindle motor power 75 kW - 3 speed ranges - 12-position turret - weight between centers 11,000 kg - weight on spindle 2,900 kg - hydraulic follow rest. Laedpfx Ajx Edu Tsa Ejk

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Laedpfx Aasx Ahx Ds Eok Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: used, Year of construction: 2000, turning diameter 280 mm turning length 960 mm Laedjxz Scqopfx Aa Esk control MORI SEIKI MSX -501 III weight of the machine ca. 13,5 t

Condition: used, TECHNICAL DETAILS - Number of axes : 2 - Table dimensions : 2500 [mm] - Table rotation speed : 1.25 - 160 [rpm] - Max. turning diameter : 2800 [mm] - Maximum workpiece height : 2300 [mm] MACHINE HOURS - Number of working hours : 15557 [h] Lajdpfxewbkd Ns Aa Esk EQUIPMENT - CNC : FANUC Series 16i-T

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x16502 mm Weight 1800 kg Laodpev A Ht Rsfx Aa Esk Total power requirement 8 kw

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, Mazak Quick Turn SQT-18MS lathe with sub spindle. Equipped with chip conveyor, chuck, and accessories. Supplied with German manuals. The machine is available for immediate collection. Lajdpfxox Nbl To Aa Eok

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h Ljdsx Hx Dnopfx Aa Esak EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: used, Year of construction: 2012, operating hours: 16,777 h, machine/vehicle number: S6C123101, turning diameter: 500 mm, spindle speed (max.): 5,000 rpm, USED CNC LATHE EMCO MAXXTURN 65Y - Serial N° : S6C123101 - Stock N° : 7539 - Year : 2012 - Number of production hours: 16 777 hours MAIN SPINDLE - Bar diameter: 65 mm - Max swing over bed : 610 mm - Max swing over slide : 360 mm - Turning diameter: 500 mm Laedpfx Aasx Iwa De Eok - Spindle nose: KK6 - Spindle speed : 5000 rpm - C axis: 360° indexing increment 0.001° SUB SPINDLE - Spindle nose: KK6 - Spindle speed: 6000 rpm - C axis: 360° indexing increment 0.001° TURRET - Number of positions: 12 - Number of motorized positions: 12 - Axis strokes : X=260mm - Y=+/-40 mm - Z1=610 - Z2=580 mm - Rapid travers rates : X=30m/min - Y=15 m/min - Z=30 m/min Equipped with : - 1 CN SIEMENS - 1 Chuck 3 jaws Ø 210 mm - 1 Tool measuring arm - 1 Part recovery arm - 1 Tailstock for sub spindle - 1 Collet holder Schaublin F68 on the main spindle - 1 Collet holder Schaublin F48 on the sub spindle - 4 Double frontal rotating tool holders - 2 Single front rotating tool holders - 3 Side rotating tool holders - 7 Double fixed tool holders - 108 Collets F68 - 1 Chip conveyor

Condition: used, Year of construction: 2000, functionality: fully functional, CNC Lathe Mori Seiki ZT 2500 Y Year of manufacture: 10/2000 Lasdpfxoxz Hnnj Aa Eek Control: MORI SEIKI MSX-501 III Simultaneous machining on 2 surfaces with 2 spindles and turrets. Double-sided machining Large number of tools included. For further technical details, see images.

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Lsdpfx Aox H S I Tsa Eoak

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x1750 mm Weight 1800 kg Lasdpfx Aov A Ht Dja Ejk Total power requirement 5 kw

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Index G42 lathe with 3m bar feeder, fully functional. Max. bar diameter: 42mm. The machine is equipped with an automatic bar catcher. Comes with chip conveyor and coolant tank. VDI30 turret without driven tool stations. With internal cooling. Machine is being sold because the operator is retiring. A large amount of accessories included, such as bar guide bushes, collets, etc. – see pictures. Machine manuals and documentation available. Ledpfxsx Nbk No Aa Ejak

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm Lsdpfexyaf Rjx Aa Esak greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:15 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/50 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Lsdpfx Asx E Inmea Eoak Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 20/3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Ljdpfxex Dmm Ae Aa Ejak Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 780 mm, turning diameter: 215 mm, spindle bore: 71 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 780 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 27 m/min, Equipment: documentation/manual, CNC lathe Nakamura Tome WT 300 with: Laedpfxjx H Nmmj Aa Eok - maximum turning diameter 270 mm - maximum turning length 780 mm - Fanuc 18i-TB control unit - main spindle and sub-spindle - spindle nose ASA 8 - C axis - Y axis - 2 turrets with driven tools - automatic door - LNS bar feeder - chip conveyor - various included tapers - various included bars Free 12/24 month payment deferral available

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, The used DIAMOND SJ 22 2-axis cnc lathe is a fast CNC lathe with an inclined bed and 2-axis flat guideways of medium size, and it is equipped with FANUC 0i-TC cnc, year of construction 2007, "CE" standard. Main features: X-axis travel 280 mm Z-axis travel 360 mm 45 mm Spindle: max. rotational speed 6,000 rpm Spindle motor power 7.5Kw Stations on turret 12 pos. Laodpfot N Upvjx Aa Ejk Hydraulic tailstock with in-cycle quill, chip conveyor evacuation conveyor, set of tool holders, 250mm 3-jaw chuck with related jaws, and user and maintenance manuals complete the equipment.

Condition: used, Year of construction: 2007, self-learning lathe 230x1000 bar passage 58mm cnc FAGOR 8055 Lasdsv Nqulopfx Aa Ejk year of construction 2007 complete with: self-centering chip conveyor manual turret CAPTO C4 attachment tool holder series clamps series manual and CE certificate