Used Cnc Grinding Machine for sale (65,057)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Ledew Tfb Sspfx Al Iorn Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: ready for operation (used), Year of construction: 2015, X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm The base machine was manufactured in 1990, but was completely rebuilt in 2015 by MMD Bad Emstal, including a control system upgrade to iTNC530. (Guide rails ground and scraped, ball screw drive new or overhauled, bearings new, etc.) The machine was in NEW condition in 2015. *iTNC530 *IKZ (internal cooling) for air and water through the spindle center *Rotoclear *Chip conveyor *SK 50 chain, 32 teeth *Transport traverse *Crane loading possible *The machine is temporarily connected to the power supply and can be inspected by arrangement. Lrodpjzgr Tgofx Al Ijn

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas control unit Ledpfsw Rpvbox Al Iorn incl. automatically rotating plasma beveling unit Bevel System 2015/350 Filter system Downflow 3DFP9-SP Power: 9 kW Laser diode 23626ä

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control Lodoy Auxmjpfx Al Isrn ä23626

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Ledpfx Aloytqmms Ijrn Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma power source with automatic O² gas console (O², N²) 1 x TEKA filter system, outdoor installation 1 x Nesting software integrated into the machine control system Availability: immediate 23626

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track width: 8,000 mm Lrodpeykruajfx Al Ien Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and rail system ä23626

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Ledpoyhd Rbofx Al Iorn Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediately ä23626

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC We have our own technicians available for installation, commissioning, and training! Lsdpfx Ajiff Dajl Iorn All spare parts are in stock. 23626ä

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Type: ACK-2D Ledpew El Udofx Al Isrn Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 23626

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Construction: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Extraction Table 1 Oxy-fuel Torch Cutting Thickness up to 150 mm 1 Plasma Marking Unit Kjellberg Laser Pointer Technical Data in Detail: 1x Oxy-fuel Torch (1 x fully automatic) 1x Plasma Marking Unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC Machine Control iMSNC with integrated network card LCD Operator Panels on the Portal Laser Pointer with automatic offset transfer Parameter Database iMSNC Control / Windows® Programming System "AsperWin-Basic" for programming directly on the machine control Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic Height Control via arc voltage USB 2.0 connection for data storage devices Module Remote Diagnostics MicroStep® "iFDS Win" Lredpfjudn Rzex Al Isn Remote Maintenance Access via TeamViewer Central Gas Control via Proportional Valves Parameter Database for 1 Torch Power Cables Gas Hoses for Preheat Oxygen, Cutting Oxygen Acetylene Machine Cutting Torch RHÖNA-Acetylene FIT+ 1 Piece Capacitive Height Control IHT / for Oxy-fuel 1 Piece Electric Ignition Unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® Plasma Marking Unit FineMarker Fully automatic support for FineMarker Kjellberg® Plasma Marking System FineMarker CNC Interface for FineMarker / Connection to the CNC control Module for the automatic control of the marking device 23626

Year of construction: 2022, condition: excellent (used), 5-axis Machining center independent clamp movement 16 positions tool magazine chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm automatic greasing kit Lrodpfx Alju A Uq Is Ijn extra blade unit 90° on moveable carriage wireless bor code reader

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Lredpozcyyhsfx Al Ien Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Lsdpfewwkt Aox Al Iorn Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: used, Year of construction: 1997, machine/vehicle number: 11730, CNC control HEIDENHAIN, travel: X-axis 800 mm x Y-axis 600 mm x Z-axis 500 mm, swiveling range A-axis +20/-90 degrees, C-axis 360 degrees, max. spindle speed 18,000 rpm, automatic tool changer with 30 tool positions, rapid traverse 35 m/min, machine weight 7,000 kg, chip conveyor. Lrodpfx Asy Sqglel Ion

Condition: used, Year of construction: 2005, machine/vehicle number: 564, RETROFIT of the machine in 2010, CNC control FANUC Series 18i TB, total weight 5,500 kg, filtration system W & W FILTERSYSTEME, chip conveyor SEREMETO, cooling unit EMAG HTD 720 Ljdpfey Sqiajx Al Ijrn

Condition: used, Year of construction: 1998, machine/vehicle number: ECO6828/60-01, Machine control ASYST MS 400-, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction unit. Lsdjy Sqh Ajpfx Al Ijrn

Condition: used, Year of construction: 2004, machine/vehicle number: 7202, CNC control FANUC POWER MATE, workpiece conveyor belt, fleece filter system, and HYFRA cooling system Lsdpfx Ajy Sqhvjl Iorn

Year of construction: 1989, condition: used, machine/vehicle number: 73903, comprising: KOENIG & BAUER rough grinding machine, year 1977, serial no. 73903 and KOENIG & BAUER finish grinding machine, year 1989, serial no. 720500007, with electric workpiece feeding and loading system, BEKA UPE central lubrication system Lsdpfx Ajy Sqh Nol Iorn

Condition: used, Grinding wheel diameter 300 mm, max. grinding length approx. 600 mm, with coolant system and KNOLL fleece filter unit Lredpfx Aley Sqkko Ion

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Lrjdpsza Egnjfx Al Isn Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2001, machine/vehicle number: 010614780, Serial No. 010614780, travel range X/Y/Z/B/C 680 x 400 x 625 mm +65 - -110 x 360 °, 2 pallet tables, workpiece clamping device, bridge, swiveling, 40-position pallet storage, workpiece setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, 240-position tool changer, coolant system, chip container, setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, chip tank, 240-position pallet changer, coolant system, chip container. Lrsdpfxezgvnhj Al Ijn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 11 cup wheels vertical glass edging machine condtion as new with only 39536 mtrs with variable angle : 0-45° glass thikness : 3 - 30 mm min. glass size : 65 x 65 mm ( till 12 mm glass) min. glass size with variable angle 45° : 150 x 150 mm max. arris width : 5 mm work height : 895 mm max. glass weight : 600 Kg / m machine sizes : L = 8385 x W : 1200 x H : 2900 mm weight : 4800 Kg Available : from stock . Lrsdpfxey D T Aye Al Ijn

Condition: new, Year of construction: 2024, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,084 t dimensions of the machine ca. 1x0,5x1 m New device Lodpfevcrnasx Al Isrn

Condition: used, Year of construction: 2020, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,11 t Ljdpfx Ajvblayjl Iern dimensions of the machine ca. 1x0,5x1 m Demonstration unit, rarely used

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Machining diameter: 4,000 mm Machining height: 850 mm Ledpozfma Ejfx Al Iern Control system: SIEMENS Tool holder: Grinding segments