Used Cnc Grinding Machine for sale (91,792)

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Hedpfx Aajt Hw S Uecjfn Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: ready for operation (used), Year of construction: 2017, operating hours: 20,995 h, functionality: fully functional, machine/vehicle number: W11106617/144, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 390 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding diameter: 0–390 mm Internal and external grinding: up to 1 m Max. workpiece weight, unsupported (MK 4): 100 Nm Max. workpiece weight between centers: 250 kg X-axis Feed Rapid traverse: 350 mm Rapid feed rate: 12 m/min Fine feed increment: 0.0001 mm Z-axis Feed Max. travel: 1,150 mm Travel speed: 12 m/min Linear scale resolution: 0.0001 mm Spindle Data Internal grinding spindles: 80 x 350 mm Hodpfx Aew Nwxujacofn Grinding Wheel Spindle Head Grinding wheel diameter: 400 mm Drive power: 5.5 – 7.5 kW Peripheral speed: 25 – 50 m/s Workpiece Spindle Head Speed range: 1 – 1,000 rpm Internal taper: MK4 Centering diameter: 63 / 80 mm Tailstock Quill taper: MK4 Quill stroke: 45 mm Filtration and Extraction Paper band filter system: 350 l tank Mechanical mist extraction: 600 m³/h MACHINE DETAILS Operating hours: 20,995 h EQUIPMENT Full enclosure Manual balancing system Touch-trigger longitudinal position indicator Leveling shoes for alignment Grinding centers MK 4 solid and half center (carbide-tipped) Dressing tool 0.5 carat diamond

Year of construction: 1995, condition: ready for operation (used), A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible. Hsdpfew H Attox Aacofn

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Hfodpfxev Dia Ae Aacsn Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 020.0686.90.084, Price on request Used CNC cylindrical grinding machine Manufacturer: STUDER Model: S 36 CNC Year of manufacture: 1999 With FANUC 16 G CNC control Used Cylindrical Grinding machine Hfsdpswl Axtofx Aacon Manufacturer: STUDER Model: S 36 CNC Year of manufacture: 1999 With FANUC 16 G CNC control

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, spindle speed (max.): 7,000 rpm, feed length Y-axis: 320 mm, type of input current: three-phase, overall weight: 4,650 kg, center height: 190 mm, travel distance X-axis: 490 mm, grinding spindle motor power: 24,000 W, workpiece diameter (max.): 320 mm, input voltage: 400 V, nominal power (apparent): 35 kVA, spindle nose: ISO 50, swivel angle A-axis (min.): 360 °, CNC tool grinding machine - WALTER Helitronic Power Production TECHNICAL CHARACTERISTICS: CNC control: HMC 500 Software installed: Tool Studio 2.1 R4 Number of axes: 5 Height of centers: 190 [mm] Stroke X: axis 490 [mm] Resolution X axis: 0.00001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis : 0.00001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.00001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght: end face grinding: 320 [mm] Max. grinding length: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 80 [mm] Grinding wheel max. speed: 7000 [rpm] Grinding spindle motor power: 24 [kW] Max. diameter grinding wheel: 200 [mm] Internal workpiece spindle nose: ISO 50 Workpiece spindle max. speed: 60 [rpm] Total power required: 35 [kVA] Weight: 4650 [Kg] EQUIPMENT INCLUDED: x1 TRANSOR 12290-800A filtration unit x1 MTA oil chiller model TAE 015 x1 DSL oil mist extractor model AES-GAMMA 30 Hjdewvf I Sepfx Aacjfn x1 RENISHAW part probe x1 disc-type tool loader 40 positions x1 SCHUNK gripper x2 grinding wheel arbor adapters x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical schematic manual x1 Service Instructions manual LICENSED WALTER WINDOW MODE (WWM) PACKAGES: - Package 001 (cylindrical mills) - Package 002 (tapered mills) - Package 003 (drills) - Package 004 (step drills) - Package 006 (woodwork tools) - Package 013 (reamers) - Package 015 (insert seats) - Package 016 (warmup program) - Package 027 (flexible program) - Package 090 (loader package) - Package 091 (acm) - Package 098 (loader package) - Package 099 (loader package) - Package 100 (reference data m.) - HELICONE (flute calc. conical.) - HELIDRILL (flute calc. drills) - HELIFLUTE (flute calc. cyl. mill.) - MCS (machine control .) - SCHEIBE (wheels menu) - TS_ADVANCED (toolstudio (v1.0-v.) - TS_STANDARD (toolstudio (v1.0-v.) - TS_STEPTOOLS (toolstudio (v1.0-v.) LICENSED TOOLSTUDIO OPTIONS: - Tool Studio 2.0 server/machinecontrol - Tool Studio 2.0 standard license - Tool Studio 2.0 advanced license - Tool Studio 1.9 upgrade options - Tool Studio 2.0 upgrade options - Option steptools - Option profile light (contour roughing ...) - Option calibration w/ touch probe - Option drills Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Hfodet Hw Txopfx Aacjn Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, Hodpfx Aaodgk H Aocsfn halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 278, spindle speed (max.): 8,000 rpm, feed length X-axis: 340 mm, feed length Y-axis: 240 mm, feed length Z-axis: 240 mm, grinding wheel diameter: 150 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 197 °, No minimum price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect the machine on time between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Travel X-axis: 340 mm Travel Y-axis: 240 mm Travel Z-axis: 240 mm Swivel angle A-axis (max.): 360° Swivel angle C-axis (max.): 197° Max. grinding wheel diameter: 150 mm Speed range: 1,000 – 8,000 rpm Workpiece mounting taper: SK 50 Max. workpiece weight: 50 kg Workpiece dimensions Max. diameter: approx. 250 mm With tailstock: max. Ø 125 mm Max. length: approx. 500 mm With tailstock: max. 250 mm Maximum grinding length: 340 mm Axes A-axis speed: 120 rpm Rotational range: 360° C-axis speed: 20 rpm Hedpfx Aowvi Tleacefn Rotational range: 197° MACHINE DETAILS Overall height: 2,400 mm Overall length: 4,000 mm Overall width: 3,000 mm Overall weight: 2,500 kg EQUIPMENT - Coolant processing unit - Oil mist extraction - Documentation

Condition: excellent (used), Year of construction: 2000, grinding length: 1,570 mm, grinding width: 400 mm, total height: 2,300 mm, total length: 4,500 mm, total width: 2,100 mm, workpiece weight (max.): 1,000 kg, grinding height: 460 mm, grinding wheel diameter: 400 mm, table load: 1,000 kg, grinding wheel width: 127 mm, spindle speed (max.): 2,800 rpm, overall weight: 7,900 kg, Filtration system Coolant system Cycle controlled and G-Code Big Stone & Flanches package X - Travel: 1570mm Y - Travel: 400mm Z - Travel: 460mm Hsdpfevmgaxox Aacjfn Table Length: 1200mm Table Width: 500mm Table load: 1000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 10000mm/min. Grinding stone dimensions:400x 127 x 80mm Power: 7.5kW Speeds: 2800rpm Feed rate Y-Axis: 30000mm/min. Length: 4500mm Width: 2100mm Height: 2300mm Weight: 7900kg

Condition: used, Year of construction: 2001, grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control Siemens 840D passage width 1300 mm electro-magnetic table 4200 x 1300 mm grinding height 550 mm grinding motor 306 kW grinding motor turning speeds up to 370 U/min grinding motor feed, infinitely variable 0,5-35 m/min coolant flow rate 2000 l/min weight of the machine ca. 50 t dimensions of the machine ca. 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head Hfodpfxethumus Aacsn - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless

Year of construction: 2008, condition: ready for operation (used), A CNC-controlled surface and profile grinding machine ELB-Schliff is available. Table dimensions X/Y: 500mm/250mm, grinding range X/Y/Z: 600mm/400mm/475mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, table speed: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens. Documentation available. An on-site inspection is possible. Hfodpfew D Euzjx Aacsn

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good Hedpst Hxcnofx Aacsfn for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, center height: 175 mm, workpiece weight (max.): 120 kg, center width: 1,000 mm, grinding wheel diameter: 500 mm, grinding diameter: 349 mm, workpiece weight between centers: 120 g, grinding wheel width: 80 mm, feed length X-axis: 285 mm, feed length Z-axis: 1,150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 20 m/min, grinding spindle motor power: 9 W, overall weight: 5,300 kg, pivoting range: 210 °, Equipment: rotational speed infinitely variable, Universal cylindrical grinding machine from our demonstration center in Stuttgart. 1x external grinding wheel 1x internal grinding wheel. Manual swivel. Hirth coupling 2.5° to grinding headstock swivel axis B1. Swivel angle -15° to +195°. Workpiece table swivels +8.5° with fine adjustment and pneumatic lift for swiveling (incl. dial gauge holder for radial dial gauge) Direct measuring system for X and Z axis Resolution 0.0001mm (linear, absolute measuring system, Internal grinding device for belt spindles Ø100mm Universal workpiece headstock MK5, roller bearing mounted, spindle nose with internal mounting MK5 Spindle passage Ø30mm. Internal grinding spindle 40'000min-1 with belt drive for drive motor with belt pulley Ø105mm with frequency converter. (for bores Ø13-45mm). Spindle type 102540B Ø100mm with oil mist lubrication. With tool holder HJND 35. Incl.: 1 pulley Ø31mm on spindle 5 medium length mandrels 45 threaded bolts C-axis with indirect measuring system, Resolution 0.0001°, referencing accuracy +/-0.5° Tailstock with mounting cone MK4 and 35mm stroke. Pinole diameter 50mm with sliding guide. Mounting option for height-adjustable dressing tool holder Dressing device with G01 interface can be mounted on workpiece table, Hfodjtvxbnjpfx Aacsn movable in X-direction Portable operating device for setting up H1 Swivel-in touch probe 1 (switching) at an angle to the working plane for probe arm with M3 thread Paper belt filter 375 liters Interface for sanding mist extraction system Grinding detection Sensitron 6, Portable balancing device

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Hedoid Aphepfx Aacofn Machine in stock.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3025180903, center height: 180 mm, workpiece weight (max.): 150 kg, grinding length: 600 mm, grinding diameter: 355 mm, spindle speed (max.): 1,000 rpm, TECHNICAL DETAILS Grinding diameter: 355 mm Grinding length: 600 mm Center height: 180 mm Max. workpiece weight: 150 kg Speeds Workpiece spindle, stepless: 0 – 1,000 rpm MACHINE DETAILS Total power requirement: 30 kW Approx. machine weight: 7 t EQUIPMENT - CNC precision cylindrical grinding machine with mobile control and operating panel - Marposs P5 measuring device - Industrial filter mounted Hfjdpfewm Hr Tsx Aacsn - 2-way portal robot for automatic loading

Condition: good (used), * Machine length: ~ 19600 mm * Machine width: ~ 6200 mm * Machine height: ~ 2500 mm * Max weight of roll: 50 T * Roll length: max 13000 mm * Roll diameter: max 2000 mm Hjdpfx Aoud R Szeacjfn * Grinding spindle speed: 450 – 1800 rpm * Cutting speed: 10 – 45 m/s * Adjustment distance: ~ 13900 mm Machine delivered new in 1986, upgraded in 2014 including new Siemens controls.

Year of construction: 1980, condition: ready for operation (used), A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible. Hsdpfjw Dfg Rjx Aacjfn

Condition: used, Year of construction: 2000, grinding length 1000 mm grinding width 500 mm workpiece height 425 mm Hfsdpfx Aotr Rq Toacsn total power requirement 15 kW weight of the machine ca. 4,5 t

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Hfjdpsgigv Djfx Aacsn Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min Hfsdpfxstqqm As Aacjn grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Condition: excellent (used), Year of construction: 2001, 1 CNC cylindrical grinding machine Make: Buderus Hodpfswcrnfsx Aacjfn Model: CNC-335-I-A Year of manufacture: 2001 CNC control: Siemens 840C Largest external machining range: 150 mm Largest swing diameter above table: 310 mm Table strokes X-axis: 1050 mm Z-axis: 300 mm Workpiece speeds NC programmable: 0 - 3000 rpm Infeed speed continuously adjustable: 0.01 - 10 mm/min Infeed stroke dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 tons

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Hfodpst Hw Naefx Aacjn Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1996, grinding diameter 5 - 255 mm grinding length 400 mm centre height 130 mm grinding length at plunge grinding 50 mm control SINUMERIK 805 Hjdotqqtrepfx Aacofn grinding spindle speed 25 - 1400 U/min work piece spindle speed 0 - 500 U/min feed of grinding spindle slide cross 0 - 5000 mm/min table speeds 0 - 5 m/min grinding wheel diameter 450 mm total power requirement 10 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel

Year of construction: 2002, condition: used, grinding diameter 10-300 mm grinding length 650 mm centre height 175 mm total power requirement 12 kW weight of the machine ca. 3,7 t Hfedpfx Aajva I N Uocon