Used Cnc Flame Cutting Machine Plasma for sale (66,918)

Condition: good (used), functionality: fully functional, overall weight: 5,000 kg, total width: 4,000 mm, total height: 3,000 mm, total length: 4,000 mm, including KAPPA extraction system Type: MYKRON M 16 Serial number: 00M16.0055 Motor power: 15 kW Dcodpfsxwnd Ajx Ag Dof Speed: 3000 rpm Year of manufacture: 2000 Control type: NBS 300 Production number: 1513 Voltage: 230 V Frequency: 50 Hz Connection rating: 330 VA FCA D-04895 Falkenberg, loaded onto truck

Year of construction: 1986, condition: ready for operation (used), machine/vehicle number: 1602097, A used flame cutting machine (3000 x 1800 Corta) from the manufacturer Messer Griesheim. Type: CORTA KS 1500/2000 Machine number: 1602097 Year of construction: 1986 Machine connection: 220 V, 50/60 Hz, 1.0 kVA Dcjdped Eg Tlofx Ag Dsf

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – CUTTING TECHNOLOGY BY PROFESSIONALS FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut optimally. Automatic initial height detection, automatic arc control, and intelligent collision protection ensure maximum quality and the highest possible repeatability. The automated program sequence and the long service life of the consumables help to actively and significantly minimize cutting costs. The oxy-fuel process also impresses with its ease of use and functionality. Thanks to the automatic piercing function, preheating times and the activation of cutting oxygen are controlled by CNC. This allows sheets up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on milled surfaces. The sturdy cutting grate features offset, serrated support blades, providing optimal sheet metal support and reducing slag formation on the workpiece as well as excessive wear of the blades, which saves real money on rework and maintenance. The depth of the trough is precisely designed to accommodate slag and ensure effective cooling; it is easy to clean and captures the dust produced during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Dedpex Ngn Tefx Ag Decf Plasma material thickness: 1–25 mm Oxy-fuel material thickness: 10–80 mm Price: Machine price depending on configuration, tailored to your requirements from €38,900 plus plasma unit, transport & installation We look forward to your inquiry!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 50 mm, kaitec Easycut – PLASMA & OXYFUEL CUTTING PERFECTION FOR METAL & STEEL CONSTRUCTION The kaitec Easycut is a highly flexible CNC gantry cutting system, specifically developed for cutting material thicknesses between 1 and 50 mm. Thanks to its space-saving flatbed design, it is ideally suited for a wide range of applications. The double-sided driven machine gantry ensures exceptional cutting results through high rigidity and precise mechanical guidance. Available in three cutting area sizes, the kaitec Easycut can be tailored exactly to your sheet metal processing needs. It impresses with its great flexibility in the compact cutting machine segment. kaitec Easycut – WATER TABLE SYSTEM The robust water table forms the basis of the flatbed design. The precisely aligned longitudinal guides and the sturdy, serrated cutting grate reduce slag, protect the slats, and minimize maintenance costs. Optimized tank depth enables efficient slag collection and cooling. In addition, the system is easy to clean and reliably captures cutting dust. kaitec Easycut – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With its highly efficient plasma process, material thicknesses up to 25 mm can be cut precisely and cost-effectively. Automatic initial height sensing, arc voltage control, and intelligent collision protection ensure maximum quality and repeatability. The automated cutting process and long consumable life notably reduce operating costs. The oxyfuel process also impresses with straightforward handling and reliable functionality. The CNC-controlled piercing function optimizes preheating times and automatically regulates the oxygen supply, enabling sheets up to 50 mm to be cut efficiently. The oxyfuel system is available for acetylene or propane gas and features automatic height control for consistently precise cutting results. Cutting Area: 1,500 x 3,000 mm Material Thickness Plasma: 1-25 mm Material Thickness Oxyfuel: 10-50 mm Dodpfx Aox Ngnysg Docf Price: Machine price depending on equipment, tailored to your requirements from €29,900 plus plasma unit, transport & installation We look forward to hearing from you!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec 1530 – Your Ultimate Solution for Precision Cutting! Are you looking for the best entry-level machine on the market? Your search ends here! With the kaitec 1530 plasma cutting system, you gain access to unrivaled cutting performance and unbeatable flexibility. No more reliance on external cutting services or dealing with lengthy lead times from suppliers. The kaitec 1530 plasma cutter is designed to give you full control over your cutting requirements. Its intelligent material utilization will save you money and reduce unnecessary transport costs. Say goodbye to long waits for your orders – you control the delivery schedule and work at your own pace. Our kaitec 1530 cutting system has taken the industry by storm—and for good reason. It combines performance, flexibility, and cost efficiency like no other. Eliminate dependency and delays—choose the kaitec 1530 plasma cutting system to boost your productivity, save costs, and accelerate your workflow. Welcome to the future of cutting! kaitec 1530 – Precision and Versatility for the Future of Cutting! Our innovative machine combines the power of plasma and oxy-fuel technologies, enabling you to cut materials with impressive thicknesses of up to 50 mm. Precision cutting has never been so easy. Thanks to our integrated cutting database for mild steel, aluminum, and stainless steel, you always have total control with optimal settings for every material. With 50 macros for creating cutting programs directly on the CNC controller, your possibilities are virtually limitless. The kaitec 1530 plasma cutter not only ensures efficient workflows but also cost optimization. Our intelligent remnant sheet management and cutting cost module help you reduce material waste and lower your production costs. Experience the future of cutting with kaitec 1530 and increase your productivity, efficiency, and profitability. Welcome to a new era in cutting! Cutting Area: 1,000 x 2,000 mm 1,500 x 3,000 mm Material Thickness (Plasma): 1–25 mm Material Thickness (Oxy-fuel): 10–60 mm Price: Machine price depending on configuration, tailored to your requirements: from €8,900 (machine only, without table, etc.) Dcsdpfx Aex Ngl Ssg Dof from €15,900 (complete set) plus plasma source, transport & installation We look forward to your inquiry!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Dsdpfjwhk E Hjx Ag Decf Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, total width: 2,500 mm, total height: 2,000 mm, total length: 7,000 mm, cutting height (max.): 900 mm, table height: 900 mm, workpiece weight (max.): 5,760 kg, working width: 2,000 mm, working length: 6,000 mm, Equipment: documentation/manual, Due to model change, a fully operational and well-maintained plasma cutting machine is for sale. Dcjdpfsyid Awex Ag Def

Condition: used, Year of construction: 1982, pressure:150 t chamfer lenght:3100 mm distance between columns:2700 mm total power requirement:15,0 kW weight of the machine ca.:10 t Dcsdpfx Agjidrg Hj Djf dimensions of the machine ca.:3,115 x 1,66 x 2,785 m throat:400 mm stroke:150 mm dayligth:450 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 010199, input voltage: 220 V, height adjustment type: electric, total length: 4,820 mm, overall weight: 5,000 kg, total width: 3,760 mm, total height: 2,395 mm, control cabinet height: 1,627 mm, control cabinet length: 550 mm, control cabinet width: 550 mm, electrical fuse: 10 A, input frequency: 50 Hz, For sale: CNC Foam Cutting Machine - RAM SLC 499 SUPERFAST. Dcodpjyaxrksfx Ag Def Year of manufacture: 2006. Regularly serviced and fully operational. The machine is in continuous use – testing on site is possible. Cutting dimensions: a-2200 c-2200 h-1300 Transport to your specified address can be arranged. For more information, please contact by phone only: 508388091

Condition: good (used), Year of construction: 2002, table width 2000 mm table length 2 x 3000 mm burner heads 2 (3) Control Version 5T gangway length 9000 mm sheet thickness max. 100 mm output 2 KVA weight of the machine ca. 3 t Dcsdjvwgndepfx Ag Def Technical details: CNC portal flame cutting machine Manufacturer: ESAB Type: Suprarex SXE-P 3500 Year of manufacture: 2002 CNC control: Vision T5 (installed in 2014) Working area: 2 cutting tables, each L=3m, W=2m Gantry track width: 3.5m Track length: 9 m Max. sheet thickness that can be cut (autogenous): 100 mm 2 oxyfuel torches 1 plasma torch with ESAB ESP 200 power source Extraction/filter system: Kappa Separator KS2/3 flame cutting table + Mykron Fine dust filter

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing Dodorurraepfx Ag Djcf 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Cutting range steel up to 30mm, exchangeable head Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Shaft for processing pipes and profiles (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 Dcsdpfsxc Ibrox Ag Djf GENERATOR: CEBORA PLASMA PROF166

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm Dcjdpfx Agjygk Sie Djf ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Dcjdpsxywupsfx Ag Djf Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. Dcsdpfx Ajwq Dvdog Dsf As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2000/6000 Construction: steel+aluminum Working field: 6200/2200/1400 XY axis drive double-sided gantry drive: 4Nm stepper motors with gear ratios, gear strips grade 8 Z axis drive: stepper motor ball screw Double aluminum beam with special cross section for rigidity, durability Travel speed: up to 25m/min Z axis control system: THC My plasma system Linear guides: TBI, Automatic material detection system Power supply: 240V Permissible load: 3000kg Total weight: 2500kg USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails class 8 Y axis stepper motor and toothed strips class 8 Z axis stepper motor and ball screw Drives realized with TBI 20 brand rails Table equipped with a water grate-low operating costs (Water table, giving a cleaner cut, cooling the material and reducing gas emissions during processing) WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (MANUFACTURER OF THC) PROFESSIONAL GUIDE RAILS OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER TREATMENT COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES Dcodpfx Ageiphrto Def WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2040 Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR Dedpsiphrlefx Ag Decf - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDES OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Year of construction: 2023, condition: new, PLASM PLOTER MODEL MTX 2040 Ventilated Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: -ventilated table -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Dcsdpfx Agoiphu Is Dof Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Dsdpfxerb Dyze Ag Decf Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty Dodeh Rabnopfx Ag Djcf The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Height: 280 mm Dcodpfx Agjxfk Dzj Dsf Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Dcsdpfxoww Sy Dj Ag Dof Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, workpiece weight (max.): 900 kg, table length: 3,000 mm, table width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The head has been replaced and the machine has been serviced! TECHNICAL DETAILS Dcedpfxexcwake Ag Djf Table size: 3,000 x 1,500 mm Maximum sheet thickness (steel): 25 mm Maximum sheet thickness (stainless steel): 20 mm Maximum sheet thickness (aluminium): 20 mm Maximum workpiece weight: 900 kg Plasma source: Hypertherm 125 MACHINE DETAILS Total weight: 1,100 kg EQUIPMENT Documentation/Manual

Year of construction: 2004, condition: excellent (used), I sell the CNC cutting machine for carton cutting with knife Dodpod I N Etjfx Ag Decf Good condition, generally repaired at the producer, sellable immediately.

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg Dcodpfxexugqve Ag Djf The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.