Laser cutting machine

Baykal BAYKAL Plasma Cutting Machine BPL H

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cgjdpfx Ashv U Swekwew Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cjdpfsx Dlwmsx Akwsgw Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä2726

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs. Cgjdpfx Aetp Dhpskwjw  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) Cgedpfx Ajri Slmskwjw - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Year of construction: 2006, operating hours: 2,500 h, condition: used, Field of application: Construction Cjdjh Tyzispfx Akwegw Please contact Mohamad Fattah Ahmad for more information Vibrator MR 100 V for RTG Piling rigs inclusive clamp MRZ 105

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Cgedpfx Aerq D Niskwjw The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Year of construction: 2026, condition: new, A small, table version semi-automatic Bag in Box filler is an easy, economical and mobile solution for filling liquids into Bag in Box or Stand up Pouch packages. Insert the bag or pouch into the filler and pull the handle – the package is filled automatically. Return the filling handle into the start position, cap the bag and the filling process is finished. - Capacity ~250 pcs. of 3 L packages (depending on the pump). - The weight of the machine is only 50 kg so it is especially easy to move or transport from one facility to another. - There are two options of the machine: with or without pump. When purchasing machine without pump, you can connect your own pump or fill the packages by gravity. - Hot and cold filling of bags and pouches is possible from 0,5 liter up to 20 liters. - The machine is suitable to fill both Bag in box and stand up pouch packages with a tap. Cgjdpfxeh S H A Is Akwjw - Bag in Box filler pre-vacuums the bags and pouches before filling. - Machine comes with touchscreen panel and a multi-language menu. - Repeatability of volumes with an error of ± 0,5 %. - Easy-to-adjust filling table for different volumes of bags and pouches. - Working surface of the table consists of conveyor rollers which are easy to clean and help for the smooth slide of the bags and pouches. - The filler is easy to clean after work with external and CIP cleaning. - The filler is reliable, simple and easy to use and maintain.

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Csdsxp Rb Iepfx Akwjgw

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Codpfjw A H T Asx Akwsgw Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M Cgjdou Dw I Espfx Akwjw If you want more pictures or information please contact us.