Used Cnc Drilling for sale (12,581)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump Fsdpfx Aisu Tln Nevjgh - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm Fgodozc I Iyepfx Aivjh capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Fgjdpfxjxmvnuo Aivsh Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC drilling machine. Fgodpjz Evfujfx Aivoh

Year of construction: 1995, condition: ready for operation (used), A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible. Fsdpfsu T Rgwsx Aivsgh

Condition: used, WFL M 35 G MILLTURN is a CNC Turning‑Milling‑Drilling Center delivering high precision, accuracy and reliability. Capacities: distance between centres 2000 mm, max turning Ø 520 mm, spindle bore 77 mm; travels Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Specs: main/back spindles up to 4000 rpm, 29/33 kW (551/630 Nm), driven tools 6/13 kW, milling spindle 9000 rpm 15/20 kW (165 Nm); rapid traverses Z 40 m/min X 30/10 m/min; weight ~20000 kg; size 7900×5700×3250 mm. Accessories: lamp, coolant system, paper filtration, oil mist extractor, chip conveyor, automatic load/unload, Renishaw measurement. Enables tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Fsdez Dv Dbspfx Aivjgh

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Fgsdpehik Ezofx Aiveh Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: excellent (used), CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Author 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 912: mm 100 /1000 (o 500+500) 238400A) Loader (Bridge Frame) "MAHROS" single station, Mod. Runner 238400B) Connection transfer unit, with tilter (180°, up-side-down) "MAHROS" Mod. Rib 238400C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 912 - N.2 Vertical electro-spindles (on the Y-axis) for fittings - N.2 upper drilling units, each consisting of: - 2 vertical 36-spindle heads (72 in total per unit) Fgedpfx Aijzx R Aksvjh - 1 vertical 14-spindle heads (on the Y-axis) for fittings - 2 horizontal spindles (4 in total per unit) on the Y-axis - N.2 heads with 3 vertical spindles (for hinges) - N.2 horizontal units (1 R + 1 L) with N.2 21-spindle heads (21 + 21 = total 42) per unit 238400D) Stacker (Bridge Frame) "MAHROS", single station Mod. Runner

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block Fgodpfx Aisy Nb Tkevsh (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Fsdpfxevpafyo Aivjgh Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), CNC Flexible Automatic through-feed DRILLING LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CDL Fgodpfx Aozxn N Ijivjh B) 1° Motorized Roller table "MAHROS" with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) S - N° 6 mobile consoles (workbenches) controlled by CN on the X-axis - N° 4 upper drilling units - N° 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" with 90° motorized belts (from longitudinal to transverse) F) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SDL, with "WANDRES" panel cleaner

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. Fsdpfxow D Uqfo Aivegh 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm.

Condition: used, machine/vehicle number: 008722, X axis working area: 3050 mm Y axis working area: 900 mm Main Electrospindle power: 5.6 KW Fgjdjztkb Aspfx Aivjh Number of controlled axes: 3 axes Total number of drilling spindles: 14

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 Fgsdpezy N E Hjfx Aivsh - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Fgjdpfxoyak Ane Aivjh Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Fodpfou U Hgiox Aivjgh Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping system - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine Fgedpsh Ic Ufofx Aivoh - central oil lubrication system Vogel - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm cross adjustment: 250mm height adjustment: 250mm Fgsdpfeg Tvmbox Aiveh grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION Multi-functional CNC drilling machine is able to drill from 6 sides. Independent top grooving, 5.5kw main spindle of 4-slot tool changing magzine, and 1 drilling block on top, one drilling block and one main spindle on bottom meet different process requests and gives batch-size-one production max flexibility; Software is open port, support most formats in market. Compact design, save space /// TECHINICAL SPECS Total power - 21.07 KW Machine dimensions - 3962× 3010× 2320mm Power supply - 380 V/50 Hz Air supply 0.6-0.7 MPa SYNTEC control system Panel size Length 200-2,800 mm Width 30-1,220 mm Thickness 10-60 mm Maximum travel speed X-axis/U-axis - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Fgedeyi Avfopfx Aivjh V axis (push) - 30 m/min Drilling blocks Top 1; Bottom 1 Number of vertical drills (top) 1 Number of horizontal holes (top) X: 2*2+ Y: 2*2 Number of vertical drills (lower) 9 Maximum drill diameter Φ35 mm Distance between holes 3 Rotation speed 5000 rpm Shaft diameter Φ10 mm Drill length 7 Main shaft Upper - 1*5.5 kW ER32 ATC4 18000 rpm Lower - 1*3.5 kW er25 18000 rpm Saw blade Power 1.7 kW Dimensions Ф 100* Ф 22* δ 4Center distance 6500 mm Conveying capacity approx. 0.2 t/hour Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm Fodpex N Iclofx Aivjgh - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Year of construction: 2001, condition: used, Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Fodpfx Aozzqc Njivogh

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. Fedpfx Aeig T Amoivsgh 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2018, I sell the multiple drilling machine with inserting Vitap Blitz Year: 2018 Number of drilling spindles 1 Number of inserting heads 1 Glue spraying with pump Programming CNC-driven X-axis Fedpjwg Tyqsfx Aivegh Very good condition. Available immediately

Condition: excellent (used), CNC Flexible through-feed DRILLING, ROUTERING AND DOWEL INSERTING LINE Min/Max workpieces (panels) width (X axis) with Author 924: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 924: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 924: mm 100 /1600 (o 800+800) 200027A) Loader (Bridge Frame) "MAHROS" double station, Mod. Runner (max mm 1300) 200027B) Connection transfer unit "MAHROS" (90°) 200027C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 924 - N.4 Vertical electro-spindles (on the Y-axis) (Kw 6,6 ca.) Fgedpfxozza Nlj Aivjh - N.4 upper drilling units, each consisting of: - 1 vertical 36-spindle head - 8 (4+4) horizontal spindles on the Y-axis - 1 vertical 14-spindle heads (on the Y-axis) for fittings - N.2 horizontal units (1 R + 1 L) with N.1 21-spindle drilling head (2x21 = total 42) per unit - N.2 horizontal units (1 R + 1 L) with N. 6-nozzle injection head (2x6 = total 12) 200027D) Connection transfer unit "MAHROS" (90°) 200027E) Stacker (Bridge Frame) "MAHROS", double station, Mod. Runner (max mm 1300)

Condition: used, Year of construction: 2015, functionality: fully functional, table length: 6,000 mm, positioning speed: 30 m/min, table width: 2,540 mm, working height: 1,092 mm, workpiece weight (max.): 5,000 kg, overall weight: 24,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch Fjdpfx Asxn T H Djivsgh - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).