Used Closure for sale (506)

Condition: used, axle configuration: 3 axles, first registration: 10/2014, loading space length: 9,600 mm, loading space width: 2,450 mm, loading space height: 2,000 mm, loading space volume: 52 m³, Axles and Suspension, Wheels/Tires 3x9t CB disc brakes, air suspension with lifting and lowering function 2,140 mm wide-track chassis, 1,400 mm spring center distance, 1st axle liftable with valve on chassis, Equipped with 6x 385/65 R 22.5 tires approx. 50-60% tread remaining on Alcoa ALU rims DB 11.75x22.5 ET 120 Chassis Welded lightweight steel frame construction, fifth wheel plate with replaceable 2" kingpin, 2x mechanical Jost landing legs with swivel foot, single wheel mudguards, foldable underrun protection, 2 chocks with holders, Braking system 2-line brake system, EBS, 2 non-interchangeable coupling heads and EBS socket at the front, without connecting cables, Spring parking brake, all test connections accessible from the outside for convenient maintenance Cpodpfx Asyi Rcmsgzow Electrics 24 volt, LED multi-chamber lights, side yellow LED marker lights, two non-interchangeable seven-pin sockets, no connecting cables, additionally at front 2x 7-pin socket and 1x 15-pin, 2 LED reversing lights Hydraulics Geoerg front press 250 bar with hydraulic hose and Edbro Type 1" screw coupling Body Rectangular aluminum body made of wear-resistant aluminum hollow profiles, slanted front wall with external hydraulic cylinder mount, Rear wall as combination door (swing and door), rubber gasket, suspended, with automatic hook locking and pre-locking pin, additional removable spindle locks for the tailgate, continuous 4 mm thick side wall, 8 mm thick continuous floor, Bulk material deflecting upper edge profile, catwalk with entry access on the left in driving direction, side roll tarp with tension strap closure left, one steel bow center/rear, toolbox at catwalk, holder for broom and shovel on the left, 2 grain chutes integrated into the tailgate, removable grain chute with sack, etc. Unladen weight: 6,180 kg Offer and images non-binding.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9,000 L Wash Solution Tank – 316L – Jacketed – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year: 2020 Condition: As new / unused Technical Data Product type: Wash solution tank Nominal volume: approx. 9,000 litres Wetted material: 1.4404 (AISI 316L) Design: Horizontal layout CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polish • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Custom-built in 316L stainless steel • Large manway with pressure closure • Integrated CIP spray nozzles / cleaning pipes • Multiple clamp and flange connections • Instrument ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy-duty industrial design • Pre-installed external piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, the clean welding, and the mirror-polished product-contact internal surface. Condition • Never used in production • Inventory stock from project surplus Cpjdpfxsykkivs Agzsw • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production systems • Sterile liquid processes Documentation – fully available and structured Comprehensive, project-specific quality and manufacturing documentation included, such as: • EU declaration of conformity and warranties • Reports and EU component verifications • Assembly documents • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welder lists, welding procedure qualifications, samples • Analysis certificates for welding filler material • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Surface roughness report • Surface treatment report • Operating and maintenance manuals (unit) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation package available digitally. Special Feature This is not a standard tank, but a premium, custom-built unit in genuine pharmaceutical quality with certified pressure design, documented manufacture, and full PED compliance including TÜV acceptance. The heavy-duty construction, large connections, and CIP integration make this vessel ideal for demanding GMP applications.

Condition: used, Year of construction: 2013, functionality: fully functional, Offered here is a used fully automatic carton erector AS-500 with two carton magazines (shown in image positions 3 + 4) from Knecht (by Smurfit Kappa). The system has already been dismantled and can be loaded onto a truck on-site. Inspection of the system is possible by appointment. The system is in very good condition, having been regularly maintained. It is being sold due to business closure. The system is designed for packaging automotive rims, but it can also be converted for other goods upon request. If interested, a video of the packaging system and a detailed technical documentation are available. Technical specifications: - For cartons as per FEFCO 0200/0201 - Bottom closure using hot-melt glue - Two carton magazines (pallet loading), each with a lifting mechanism Pallet loading with hand pallet truck - Carton picking via vacuum suction cups - Hot-melt glue station (for bottom sealing, four glue beads) - Control system: ELAU C-400 - Operation via MP 277 touch panel - Capacity: 8 cartons/minute Carton sizes: Length: 400-650 mm Width: 400-650 mm Csdpjymggpsfx Agzepw Height: 150-500 mm (Sizes can be adjusted in cooperation with the manufacturer) Further components from the packaging line by Trapo are also available for sale (see images). The following sub-assemblies are also for sale: 3. Carton magazine 4. Carton erector AS-500 by Smurfit Kappa 5. Carton sealer VS-500 by Smurfit Kappa

Condition: used, Year of construction: 2013, functionality: fully functional, Offered here is a used fully-automatic case sealer VS-500 (item no. 5) by Knecht (Smurfit Kappa). The machine has already been dismantled and can be loaded onto a truck on site. An inspection of the machine is possible. The unit is in very good condition and has been serviced regularly. It is being sold due to the closure of the business. The machine is designed for packing automotive rims but can be converted for other goods if required. A video of the packaging system and detailed technical documentation are available upon request. Further components of the packaging line made by Trapo are also for sale (see pictures). The following sub-systems are still available for purchase: 3. Carton magazine 4. Carton erector AS-500 by Smurfit Kappa Cpedpeymggijfx Agzjw 5. Case sealer VS-500 by Smurfit Kappa

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 5083, travel distance X-axis: 440 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 210 mm, For sale: B3000 Dosing Machine in very good overall condition Due to the closure of our site, we are selling our B3000 dosing system, which is only two years old. The machine has had minimal use and currently has an accounting residual value of CHF 120,000. Additionally, a credit note worth €9,000 for spare parts procurement for this machine from BDtronic will also be included in the sale. The machine will remain set up until January 2026 and can be inspected in Mendrisio. Please note that it is currently out of service and will require a complete maintenance check before being recommissioned. Therefore, a live demonstration in operation is not possible at this time. Technical specifications: - Sequential dosing of three different resins or foams - Delivery rate: 1–4 g/s Materials processed: - Elantas Elan-tron PU 505 HR/PH3 - Elantas Elan-tron PU 505 LR/PH3 - Elantas Micares X1080 R14/P 978 Further technical details and dimensions can be found in the attached PDF documentation. Csdexzpdxjpfx Agzepw Inspection available by appointment. Dismantling and transport to be organized by the buyer. Dismantling can be supported by BDtronic, which has estimated 3 days work at €2,770 per day.

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of manufacture: 2022 Ideal for woodworking companies, joineries/cabinetmaking shops, and trades in general Highly efficient air purification with a high separation rate Mobile unit for use at various locations in the workshop Easy handling Cpjdsw I Uygjpfx Agzsw Certified for ATEX Zone 2 Long filter service life Ready-to-plug-in delivery Extraction nozzle diameter: 300 mm Dimensions (L x W x H): approx. 1012 x 1135 x 1405 mm Connection: 1.5 kW / 400 V Filter area: 1 m² Maximum noise emission sound pressure level: 72 dB(A) Maximum volume flow: 500 Pa Weight: 175 kg Incl. starter set for FAG 1-4 (€445) Diameter: 300 mm (3 m hose, 2 hose clamps, 1 collar with flanged ring, 1 closure flap for exterior wall) Availability: short-term Location: Hochheim

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding Csdpfoyiw T Eex Agzspw

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Cpjdpfx Ajxf Sn Ijgzjw Offer and images subject to confirmation.

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension Disc brakes 430 mm “off-road version” SAF-Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally mounted to chassis longitudinal member 3rd axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, lift-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70%, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" - bolted into an 8 mm thick plate Landing gear Mechanical landing legs, 2 speeds, 2x20t support load, with swing foot for air suspension Brake system Cedpjyiw T Sjfx Agzopw According to ECE regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air tank system Electrical system According to StVZO guidelines with 2 five-chamber Aspöck type lights, 24V system with 2x7 and 1x15 pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly laid in plastic pipes Tipping body / Dump body “smooth construction” Fully welded inside Aluminium dump body, side walls with 30 mm thick plank profiles (2-3 mm) welded 600 mm wide, floor 6 mm thick, high wear-resistant alloy (5383H34/HB 110) with 45-degree bevel to side wall, front wall 4 mm reinforced, inclined design, rear wall designed as a universal door, straight design with 2 wing doors in 2/3–1/3 configuration and a grain chute, ALU round profile welded laterally and below to seal door gap on rear doors, rear doors partly clad with smooth aluminium. Universal door operated automatic-pneumatic, lockable with separate lever, aluminium rear brace pivotable, two hold-downs with rubber buffer on the dump body fixed to the frame at the front wall. Hydraulic system Tipping cylinder with "rotule" suspension (light) Hydraulic cylinder mounted on front wall with a working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and loose 1" half, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap over the full vehicle width attached to underrun guard, no spare wheel holder, aluminium, foldable side underrun protection right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 central aluminium swing bows raised approx. 150 mm, additionally a centrally mounted bow holder for positioning up to 2 bows to widen the loading width, roll tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with roll tarp system, continuous rubber cord at the rear closure of the tarp with two tension hooks to be fixed on the rear swing bow, catwalk on the frame in chassis colour with access left and right, tarpaulin closure to the side with quick-release fastener, rear tarp closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium, 2 "Clear-Pass" spray flaps on mudguard according to EU standard, aluminium grain hopper fixed to the side of the frame with plan bag, holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Condition: used, mileage: 157,700 km, power: 175 kW (237.93 HP), first registration: 07/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space volume: 42 m³, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,360 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, Tail lift Palfinger 2,000 kg, 2,400 mm. ----Spier box body with loading door on the right (1,900 mm high, 1,000 mm wide). Lashing rails in the cargo floor and under the cargo ceiling for load securing bars. ----* Box body without rear doors, tail lift forms the closure * Electronic brake system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Trailer brake, dual-line * Trailer Stability Assist (TSA) * Wheelbase 5,500 mm * Driver's air-suspension comfort seat * Air conditioning * Residual heat utilization * High storage compartment on engine tunnel * Roof hatch/ventilation flap * Trailer socket 24 V, 15-pin * Reversing warning system * ClassicSpace M driver's cab, 2.30 m wide, 320 mm engine tunnel height * Aerodynamic kit * Exterior sun visor, transparent * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automated transmission * Mercedes PowerShift 3 * Heated driver's seat * Tyres 315/70 R 22.5 * Tyres 315/70 R 22.5, rear axle * Air suspension, rear axle * Navigation system * Reversing camera * AdBlue tank 60 litres * Fuel tank 500 litres * Fog lights, LED daytime running lights * Engine OM936, inline 6-cylinder, 7.7 l, 175 kW (238 hp), 1000 Nm * Engine specification Euro 6, E Codpfjyl Dw Asx Agzjpw * High Performance Engine Brake * TruckLive * Safety Pack, without roll control * Lashing eyes in cargo floor * Electronic Stability Program (ESP) * Lane Keeping Assist * Proximity Control Assist * Attention Assist * Traffic Sign Assist * Turning Assistant (Blind Spot Assist) * Active Brake Assist 5 * Active Brake Assist, permanently active * Driver airbag * Cruise control * Turning assistant, permanently active * Swing door in cargo area on right * Actros S/M cab, model generation 5 * Load securing rails * ATS warranty according to terms and conditions, 3 years/250,000 km * EBS * Without spare wheel ----Sale to business customers only! No guarantee for the above specifications! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to offer you a leasing or financing proposal.

Condition: new, maximum load weight: 11,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,330 mm, Year of construction: 2025, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ KROLL Suction-Pressure Tank Trailer ADR (internal no. #518) Type K 14.0/36 PEAH --- Tank code L4BH Suitable for the collection and transport of liquids and sludges. Total capacity approx. 14,000 liters (air volume) Sludge chamber (behind piston) approx. 12,000 liters (air volume) Tank material: S355J2G3 Shell wall thickness: 7 mm Flange pair "LONG LIFE" Closure bottom can be opened by 2 hydraulic cylinders Closure bottom locking with tension claws, hammer head bolts and galvanized linkage Cedpfx Aexc S Aaogzspw Pneumatic lid locking Tank level indicator via internal float and external display scale Discharge apron made of aluminum Discharge by free flow and via piston Piping and fittings in DN100 Suction line DN100 Operator station rear right Chassis 9t BPW axles, air suspension with lift and lower valve for each axle Ball-bearing slewing ring and certified long drawbar Tires 4x 385/65R 22.5 Michelin Plastic mudguards Rear impact protection Side underrun protection 2 wheel chocks Dual-line air brake system with WABCO EBS, ABS, and TSS Hose lockers left and right on superstructure Toolbox LED work lights LED beacon lights 4x LED area lights Advertising panels left and right, 3000 x 650 mm For further details and/or pictures, please contact us directly. You will find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively in accordance with our terms and conditions and excludes any warranty.

Year of construction: 2017, condition: excellent (used), UV curing machine  The product is a machine that has been designed for curing silicone. Due to the UV curing, the machine can probably be used for other purposes as well. Manufacturer: Hereaus Curing: UV curing Operating voltage: 400 V Control voltage: 24 V Rated current: 16 A Fuse: 25 A Frequency: 50 Hz Year of manufacture: 2017 Among other components used: Heraeus P300MQ Motori Elettrici 71M/2 Motor Condition: used  Cpodpfxog H Sywe Agzsw Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Interroll roller conveyor 1.07m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Codpfx Ashvmlgegzjpw Width: 400mm Length: 1070mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Belt conveyor 4,30m with drive Length: 430cm width: 70cm Height: 90cm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! Codpehvmlksfx Agzspw International shipping costs on request!

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. Cpodpfx Ajiuzkmsgzsw ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2017, condition: good (used), EdmoLift WP 85EM electric lift 80 kg platform 60x47 cm 24V The WP by Edmolift series of electric lifts, manufactured in Sweden, is designed to enable the operator to easily lift, transport and position heavy objects - all under perfect ergonomic conditions. With a lifting capacity of up to 200kg, the powerful electric lifts of the WP by Edmolift series have many applications, while the design of the lifts brings unbeatable mobility and ergonomics. With many accessories available, the WP by EdmoLift series offers you the most universal and solid electric lifts on the market, easily adaptable to your needs. Manufacturer: EdmoLift Model: WP 85EM Serial number: 125512 Type: Electric lift Load capacity: 80 kg Own weight: approx. 40,5 kg dimensions: 79,5 cm long, 60 cm wide and 192 cm high loading area: 60 cm wide and 47 cm long Lifting time: approx. 19 sec Battery: 24 V resp. 7,2 Ah charger: 230 V resp. 1,5 A max. platform height 176 cm minimum height: 12,5 cm Protection class: IP 54 Year of manufacture: 2017 Cpjdpfoiu U E Uex Agzow Country of manufacture: Sweden Condition: used Scope of delivery: see pictures Complete factory closure, Wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. Csdpfxshvmi To Agzspw High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. Cedpoiuzlvjfx Agzspw ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: M319, Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE-marked packaging machineryAdvanced Automation & Control SystemsThe monoblock is configured for automated operation with centralized machine controls, ensuring stable production at 6000 bottles per hour. Electrical architecture is standardized for 380 V, 50 Hz, three-phase networks, supporting safe integration into existing bottling equipment. CE conformity underpins safety circuits and compliant machine wiring, while the integrated design simplifies synchronization between the filler and capper to minimize downtimes during format changes.Production Line Integration CapabilitiesThis unit is well-suited for integration within a used bottling line or as a standalone monoblock in beverage production. Its adjustable working range supports bottle formats from 0.5L to 1.0L, with compatibility for PET and glass bottles, making it adaptable for diverse industrial packaging requirements. Conveyors and upstream/downstream modules can be synchronized to line speed, supporting efficient infeed and discharge configurations.Machine Condition & Maintenance HistoryThe machine is second hand with 10000+ operating hours and configured for ready-for-operation deployment, subject to standard installation and commissioning procedures. Its CE-marked construction and preserved utility specifications indicate a well-documented industrial asset suitable for continued service within beverage production environments.Operational Performance & VersatilityCombining filling and capping on one frame, the monoblock eliminates inter-machine transfer points and reduces footprint. The 6000 bph throughput is ideal for medium-scale operations, contract packaging, and line expansions. Flexibility across PET and glass bottles within 0.5L to 1.0L allows rapid response to product mix changes in bottling equipment portfolios. The integrated capping system ensures precise torque application aligned to the selected closure format when appropriately tooled.Installation Requirements & Site PreparationThe machine requires a 380 V, 50 Hz, three-phase electrical supply. Electrical protection should be selected considering a full load current of 120 A and a short-circuit interrupting capacity of 5000 A, in accordance with site standards. Space planning should allow for safe operator access, changeover activities, and routine sanitation. Integration with existing conveyors and... Cpsdsymdqfjpfx Agzow

Condition: used, Year of construction: 2003, machine/vehicle number: M321, Technical Specifications & Performance DataThe ACMA GD RC15/6-200 is a rotary filling monoblock with integrated capper and cap sorter engineered for high-reliability industrial packaging. This second hand unit offers dependable performance for a broad range of liquid products in bottles, combining precise filling with efficient capping on a compact carousel platform. Its format range and closure flexibility make it an excellent choice for upgrading a used bottling line or expanding an industrial packaging cell.Manufacturer: ACMA GDModel: RC15/6-200Year of manufacture: 2003Machine concept: Rotary filling monoblock with capper and cap sorterPerformance (500 ml): up to 85 bpmPerformance (650 ml): approx. 40–75 bpmBottle formats: Compatible with 0.5L, 0.65L, 0.75L, 1.0L bottle formatsClosures supported (examples): Screw cap, push-pull screw, refill screw, flip-top screwFilling carousel: 15 valves (as indicated by model designation)Capping turret: 6 heads (as indicated by model designation)Compliance: CE markedAdvanced Automation & Control SystemsThe RC15/6-200 integrates synchronized rotary filling and capping turrets with automatic cap sorting and feeding. Format parts are clearly organized for quick-changeovers across multiple bottle sizes, supporting efficient product transitions and minimizing downtime. Operator-friendly controls coordinate filler and capper timing for stable throughput and consistent torque application.Synchronized rotary filler/capper with integrated cap sorterQuick-change format parts covering multiple bottle sizesProcess stability for repeatable fill accuracy and capping qualityCE-compliant safety logic and guarded access zonesProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly into complete packaging lines. It can operate inline with upstream bottle handling (e.g., unscramblers) and downstream equipment such as a dedicated trigger capper, labeling machines, and case packing systems. The machine’s format scope from 0.5L to 1.0L supports multi-SKU operations in industrial packaging and beverage production for still products.Inline operation with upstream and downstream conveyorsCompatible with screw-closure ecosystems and downstream trigger cappersFlexible formats: 0.5L, 0.65L, 0.75L, 1.0LSuitable for integration within a used bottling line or new installationsMachine Condition & Maintenance HistoryThis is a second hand rotary filling monoblock presented as operational equipment and ready for deployment after standard line integration and commissioning procedures. The CE mark on the original nameplate underscores compliance with European safety standards at manufacture.Operational used equipmentOffered in ready-for-operation conditionOriginal CE marking presentOperational Performance & VersatilityDesigned for screw-closure applications, the RC15/6-200 supports multiple closure styles including standard screw caps, push-pull, refill, and flip-top variants. Its rotary architecture delivers smooth... Cpsdeymdpzopfx Agzew

Condition: used, Year of construction: 2015, Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation Csdpfx Aol Hxzksgzopw

Condition: used, Year of construction: 2021, Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Cap hopper  Cap control Cpjdpfemk I Dtjx Agzew

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available Cpodpfx Agsvy D Adszsw

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  Capacity: Up to 2,000 bph (operated between 500–1,000 bph) Filling System: Isobaric, counter-pressure Filling Valves: 5 Bottle Formats: 0.33 L and 0.75 L (adjustable) Can Formats: Standard 0.33 L Closure Systems: Integrated can seamer and crown capper Construction: Stainless steel Working Pressure: up to 3 bar CO₂ System: Pre-evacuation for cans, vacuum for bottles Controls: Touchscreen with adjustable parameters Mobility: On wheels with adjustable legs Condition: In use, regularly maintained Scope of Delivery  Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking   Csdpfjxn Uf Iex Agzspw

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Cpsdpjukkvnjfx Agzew