Used Climate Chamber for sale (6,492)

Condition: used, Primus Engineering Type: DST 350 This test setup was designed for performing IP protection tests for “dust” according to, for example, DIN 40050 Part 9 and DIN EN 60529. The test setup is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Pre-programmed test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing IP protection tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Ibjdpfx Ajzgbtiefusc Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Ibsdpfxjzhadce Afuoc Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and meets the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-isolated granite for low-vibration mounting of an ultra-microbalance Ionization device against static charging Flow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with power outlets, grounding bolt Advantages: Meets regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% RH ± 3% Dimensions W/D/H: 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply: 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Ijdpfx Afezd Ukijusbc We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Iodpoz Alhisfx Afusbc Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Condition: new, Gas heated furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm Iedpfx Afecditneuobc temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C usable space: width 1200 mm depth 1600 mm Ibjdpfx Ao Dq Adsfujc height 1750 mm electrical connection: 220 V space needed: 1550 x 1900 x 2200 mm high weight: 500 kg

Condition: used, Used Dewatering System Chamber Filter Press / Filter Press REWA 500x500 Iodpfobpg S Ujx Afuobc Plate size: 500 x 500 mm Number of chamber: 25 Cake thickness: 30 mm and Used High Pressure- Piston - Membrane-Pump Abel Flow rate: 6 m³/h Discharge pressure: 15 bar

Condition: used, Adjustable air circulation Ijdjqt Dy Eepfx Afusbc Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

Condition: used, Manufacturer: Maurer Type: Smoke chamber for 3 trolley Electric heating 72 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood cheaps Ibsdpfx Afsq E Ry Rjuec Without after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 350 Height: 270 Trolley dimensions in cm: 100x100x200

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Ibjdpfsrunu Iox Afuoc

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw Isdpfxjtt Sy Ro Afuobc 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Iodpehzgt Rofx Afuobc Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100*100*200 height Delivery time: 30 working days after advanced payment

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Ibsdpfxefzq Sto Afuoc Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: ready for operation (used), GRAM SKS Cream Cooler Cabinet made of stainless steel, complete for 60x40 sheets Ibsdpfx Aeghmvcofusc Call us to discuss further details. Thank you.

Condition: new, El. heated chamber furnace type: VEI_KO_EB max. temperature: 450°C Ibjdehlp U Djpfx Afuec connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

Year of construction: 2025, condition: as good as new (ex-display), QUASAR 1200 kN tensile testing machine / universal testing machine most modern WINDOWS software (freely programmable test procedures), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - Machine in working order - incl. load cell 1200 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool Isdpfsdb Ndcex Afuebc - Bending tools - comression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas usable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA Iedpfxsdyvipj Afuobc hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2

Year of construction: 2025, condition: new, functionality: fully functional, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 3kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 3kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: pressure platens Screw and wedge grips bending grips Special designs according to customer specifications • extensometer • Temperature and climatic chamber • Windows software PM-Soft-Smart Isdpfx Asd H S Hiefujbc for universal use, freely programmable • putting into operation and training

Year of construction: 2025, condition: new, Economical two-column microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 10kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 10kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: copression platens Ibjdpfjd H S R Uox Afuec Screw and wedge grip bending fixtures Special designs according to customer specifications • extensometer / strain gauge: Long-distance strain gauge • Temperature and climatic chamber • W-Software PM-Soft-Smart for universal use, freely programmable • Commissioning and training

Condition: new, Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 ( NEU ! ) The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, Short delivery time ! (Example photo) Ijdpsd Ezfqsfx Afujbc We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. You are welcome to ask us for your requirements.

Condition: new, Steam heating Adjustable air circulation Ibedpfjunap Sex Afusc Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 244 Height: 260

Condition: new, Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Ibodpfounaqpox Afuec Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 129 Height: 260

Condition: new, Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 4.5 minutes Capacity: 1800 - 2000 pcs / h Number of vessels: 154 Container capacity: 100 - 1500 gr Dimensions: 1700 x 950 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 500 kg Ibjdouufr Sspfx Afuec

Condition: used, System: chamber filter press used Iedpfx Asb E A Efjfuebc Size of plate: 400x400 mm Chambers: 30 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 7,5 m² Volume of filtercake: approx. 90 dm³ Working length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Pumps: as an option Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory You want to buy or rent this plant? Talk to us, we will gladly available to you. We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands.

Condition: used, MACHINE: Chamber filter press used Usage area: Chamber filter press, pilot plant Design: page Holm led Filter plate format: 400 x 400 mm Plate number: 15 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.0 m square Presses contents: approx. 37 dm3 PCB package length: 700 mm Ibedob E I T Sopfx Afusc Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available.