Circular saw hole diameter: 10 - 180 mm
Circular saw blade diameter: 80 to 840 mm
sawblade centrebore: 10 - 180 mm
Sheet thickness: up to 8 mm
Tooth pitch: up to 100 mm
mass: approx. 1660 kg
Rake angle: -10 ° to + 40 °
Clearance angle: from 5 ° to 45 °
Angled grinding on the back of the tooth: up to 45 °
Angled grinding on the tooth face: up to 15 °
Working speed: up to 20 t / min
Tooth height difference: any
Grinding wheel diameter: 125 mm
Grinding wheel bore diameter: 32 mm
Grinding wheel per...
IMMEDIATELY AVAILABLE
Very high quality two blade notching circular saw machine
Vertical saw blade bottom Ø 600 mm
Horizontal saw blade top Ø 500 mm
Saw blade drive power 2 x 3 kW
Largest profile width at 90° - 300 mm
Btp9vpgflr
at 45° - 190 mm
at 30° - 100 mm
Maximum notching depth horizontal - 185 mm or at 30° - 130 mm
Largest vertical notch depth 235 mm
Dimensions approx. 3.3 m x 1.5 m x H 1.8 m
Weight approx. 1,200 kg
circular saw blade sharpening machine make WERKÖ type SWSK 1250
make # 230/75 GR 89, year of construction 1977
for sharpening medium to coarse metal saw blades
Technical data:
Saw blade diameter cold circular saws 250 - 1250 mm
Hot circular saws 900 - 1700 mm
tooth pitch up to 42 mm
Double height of grinding wheel 25, 37, 50, 75 and 100
per minute, where 25 and
37 primarily for the purchase of shares
straightening the machine serves
Grinding wheel revolutions 2000 and 2500 rpm....
1 used circular saw sharpening machine Cne II
Diameter of circular sawblades: 40 – 1000 mm
Diameter of grindig disk: 200 mm
Bore of grinding disk 20 mm
Width of teeth: 5 – 60 mm
Teeth high: 3 – 30 mm
Span angle: -10° to 30°
Blade thickness: up to 6 mm
Deeowvuum
speed: 30, 60, 80 teeth /min.
Weight: ca. 300 kg
engines got new bearings
HM circular saw blade back grinding machine
Brand: Akemat
Type: U 4
Year of construction: 1994
R99mhnbv
Condition: Good Used
Circular saw sharpener Loroch AK Automatic
1993
disc diameter min/max - 80/710 mm
pitch 3-25 mm
type of sanding pad Borazon
Znjaf787
Grinding disc diameter 200 mm
0.55 kw driving engine
operating speed 10-45 rpm
coolant
dimensions 1500×1200 x 2300 mm
weight of.750 kg
circular saw blade sharpening machine make WERKÖ type SWSK 315
Masch.# 134/73, year of construction 1973
Technical data:
min/ max circular saw blade diameter 16 - 315 mm
tooth pitches up to 16 mm
Stroke rate of the grinding slide 90 - 135 - 200 H/min
grinding wheel diameter 160 mm
Infeed per saw blade revolution 0.05 / 0.10 / 0.15 / 0.20 mm
Blade geometry for tool type N1 8/18°
Blade geometry for tool type H1 5/12°
Blade geometry for tool type W1 10/25°
Power supply 380 V / 50 Hz
Connected load ...
HM circular saw blade back grinding machine
Brand: Akemat
Type: U 4
Year of construction: 1995
Cmefotw8
Condition: Very good Used
Band Saw Blade Tensioning Machine
Bq2e8csogn
saw blade diameter 80 - 700 mm
workpiece-spindlehead motor 0,25 kW
grinding wheel diameter 125 mm
turning speeds 2850 U/min
Blnrbublh8
grinding range -20 bis +20 Grad
weight of the machine ca. 12 Kg
dimensions of the machine ca. 700 x 400 x 300 m
5
Circular saw blade
Dalzp72
Manufacturer: MTW
Type: 300x3,2/2,5x40 Z=48 n.max. 6400
condition: NEW / unused
Express delivery is possible at extra charge.
Saw blade grinding machine, tool grinding machine, grinding machine, automatic sharpening machine for circular saw blades
-Saw blade sharpening machine with partial gear
-To grind circular saw blades up to: Ø 200 mm
-Automatic filling and switching off
-Number: 2x available
-Price: per piece
Uzfig
saw blade diameter 15 - 200 mm
chip pocket 0,7 - 15 mm
no. of teeth 14 - 360
grinding wheel diameter 125 mm
grinding wheel width 0,3 - 7,5 mm
grinding wheel hole diameter 20 mm
grinding spindle speed 3920 U/min
stroke - stepless adjustable 80 - 180 Hub/min.
total power requirement 0,4 kW
weight of the machine ca. 200 kg
dimensions of the machine ca. 0,90 x 0,70 x 1,40 m
Leadjibr
Saw blade diameter: min. 15 mm.
Saw blade diameter: max. 200 mm.
Grindable tooth settings: 0.7 - 15 mm.
Grindable number of teeth: 30 - 256.
Incl. various change gears and documentation.
Ddls3w7
Weight: approx. 400 kg,. Old but good.
The machine can be inspected under power by arrangement and is available immediately. From stock free loaded.
Please also note my other advertisements.
saw blade diameter 15 - 200 mm
chip pocket 0,7 - 15 mm
no. of teeth 14 - 360
Ccc3rufy
grinding wheel diameter 125 mm
grinding wheel width 0,3 - 7,5 mm
grinding wheel hole diameter 20 mm
grinding spindle speed 3920 U/min
stroke - stepless adjustable 80 - 180 Hub/min.
total power requirement 0,4 kW
weight of the machine ca. 200 kg
dimensions of the machine ca. 0,90 x 0,70 x 1,40 m
machine number 12220
Bozqufsrs8
Saw blade sharpening machine with ratchet feed
for grinding circular saw blades up to 350 mm diameter.
4
Carbide circular saw blade
Manufacturer: MICOR
Bdfa7e3k9a
Type: 00BA10LM-200-1,9/1,4-32 Z=60
Max rpm: 2400
condition: NEW / unused
Saw blade grinding machine, tool grinding machine, grinding machine, automatic sharpening machine for circular saw blades
-Sharpening machine for cold circular saw blades,
-Saw blade sharpening machine with partial gear
-for grinding circular saw blades up to: Ø 1200 mm
2di7qax9l
-Automatic delivery and switch-off
-Dimensions: 1250/1020/H2250 mm
-Weight: 694 kg
Code: 0373
Brand: SCM
Model: SI 15/F
Circular saw with tilting blade for cutting solid wood, panels, composite materials, plastics
Technical data
Tilting blade up to 45 degrees
Max blade diameter mm 400
Min blade diameter mm 200
Max cutting height with blade diameter 400 / mm 140
Parallel fence
Motor Hp 5,5
Bttmuldfjf
Overall dimensions: mm 1300 x 1350 x 1000 h
Weight kg 570
Semiautomatic circular saw machine Bewo.
Incl. roller conveyors with stop
Brand: Bewo
Type: CPO 350 SA / LT
Year of construction: 2007
Mains voltage: 400V
Operation: Pneumatic (compressed air required)
Cutting speeds: 2 (20.5 / 41 m / min)
Max. saw blade: Ø 350 mm
Capacity 90 °: Ø 125 / VK 110
Capacity 60 °: Ø 120 / VK 100
Capacity 45 °: Ø 110 / VK 100
Machine dimensions: 1750 x 555 x 1100 mm (L x W x H)
O3zyf
Weight: 240 kg
Item no. : 6815
saw blade diameter 70 - 230 mm
sawblade width 12 mm
hole of sawblade 10 - 50 mm
grinding wheel diameter 120 mm
grinding wheel width 6 mm
grinding wheel hole diameter 32 mm
no. of teeth 30 - 400
Ccctaorx
total power requirement 0,33 kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,80 x 0,70 x 1,70 m
Table design functional
machine number 151290
Saw blade sharpening machine with ratchet feed
for grinding circular saw blades up to 350 mm diameter.
Bmbqdv3mej
5
Carbide circular saw blade
Manufacturer: MICOR
H27g3khw8
Type: 05EAM10L-200-2,8/2,2-30 Z=64
Max rpm: 10900
condition: NEW / unused
Spec. For solid wood cutting
high separating cuts
with 4 pieces of raker blades
Make Guhdo
Brgits0wh2
Rassant type
second hand
Blade diameter approx. 450 mm
Hole approx. 30 mm
Teeth number 40 pieces
Broach cutting 4
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Saw blade sharpening machine Loroch SW 450
With many accessories.
O2vuh
Machine is fully operational
HM circular saw sharpening machine
Brand: Vollmer
Type: Uniläpp II 450
Year of manufacture: 1979
Btshmrvdag
.
Technical data :
Cutting ranges see .....enclosed data sheet
dimensions WxDxH approx. 2,3 x 1,7 x 2,1 m
weight approx. 1,2 to
Saw blade 425 mm
4 saw blade speeds : 6 - 12 - 24 and 48 rpm
equipment :
O3ej7
- hydraulic saw feed
- hydraulic material clamping
- vice with additional clamping arm
- material feed single 600 mm
- with double stroke max. cut-off length : 1200 mm
.
- mitre cut possible from 45°-90°- 45°-30°.
- chip clearing roller
- Coolant device
.
.....
Machine number 00138
Saw blade sharpening machine with ratchet feed
for grinding circular saw blades up to 450 mm diameter
Ytjnn8
machine with automatic infeed and shut-off
prepared with dust extraction. Grinding wheel with holder and saw blade holder
Grinding of angle tooth, curved tooth and high performance toothing
4
Circular saw blade
Manufacturer: MTW
M83vz
Type: 200x2.0/1.6x32 Z=60 WFW 30°/8°/-5°
Thin section
condition: NEW / unused
Express delivery is possible at extra charge.
TECHNICAL DATA
max. cutting capacity at 90 degrees
tube 110 mm
solid material round 60 mm
rectangle 100 x 100 mm
square 120 x 80 mm
Bmu2oq7bgo
max. cutting capacity at + / - 45 degrees
Tube 80 mm
solid material round 55 mm
Square 80 x 80 mm
rectangle 80 x 80 mm
saw blade diameter 350 mm
Saw blade speed 40 / 80 rpm
Clamping width vice 120 mm
Motor power 1.8 / 2.4 K "W
Weight 231 kg
EQUIPMENT and ACCESSORIES
Coolant unit with filter
Length stop 500 mm
Operating tool
HSS saw blade ZT4
Base
A detail...
grinding wheel diameter: 240 mm
saw blade diameter: 600 mm
S8ymrkw0t
total power requirement: 1,1 + (0,37 kW) kW
weight of the machine approx.: 600 kg
Saw Blade Sharpening Machine
Machine performs grinding process automatically
saw blade continue to move automatically
grinding wheel diameter: max.: 240 mm
driving motor for feed (0,37 KW)
machine functional!
HM circular saw sharpening machine
Blcwlia
Brand: Vollmer
Type: Uniläpp 600
Year of manufacture: 1989
Table
machine number 12122
Saw blade sharpening machine with ratchet feed
for grinding circular saw blades up to 350 mm diameter.
Bn0xr8tynt
14
ARNTZ carbide circular saw blades
from termination of operation
distinct types
---at package price
---Sale possible
3 pieces
Type: Maxima-Plus
Number of teeth Z= 120
diameter 1150mm
Mounting hole 100mm
Bjmrb2im
cutting width 5mm
Condition: used / see picture 2-6
Unit price:
upon request
_____
5 pieces
Type: unknown
Number of teeth Z= 200
diameter 1000mm
Mounting hole 60mm
cutting width 6mm
Condition: used / see Fig. 7-10
Unit price:
upon request
_____
4 pieces
Type: Maxima 3000
Number of teeth ...
sharpens circular saws up to 800 mm Ø or gang saw blades in straight grinding, quick adjustment for 3 speeds, with grinding dust exhaust, if required with gang saw clamping device and indexing rail, completely disassembled, workshop overhauled and rewired
Bhyqv9est8
grinding wheel dia. x width: 200x2-10 mm
grinding wheel hole diameter: 32
grinding spindle - swivable: 20 °
rpm spindle (continous): 4850 U/min
work speed: 40 - 200 stufenlos 1/min-1
adjustment of stroke: automatic/automatico mm
grinding range external saw blade min.: 20 mm
grinding range external saw blade max.: 400 mm
grinding depth: 0 - 3,5 stufenlos mm
work height max.: 1200 mm
total power requirement: 0,75 kW
weight of the machine ca.: 0,62 t
transport dimensions LxWxH: 1,1x0,9x1,6 m
SAW BL...
HM circular saw sharpener
Brand: Vollmer
Type: Finimat 4-800
Description:
Suitable for automatic grinding of tooth face and tooth back on carbide tipped circular saw blades.
Umciplp9
Circular saw blade diameter 100 mm to 800 mm.
ID000266ID000265Second hand board cross cut saw. 2 you need more information about the equipment, please contact our manager.
Nvl8b
Automatic circular blade cutting machine make ELMA type E 144 R
year of construction 1995 for horizontal trimming of shaped sheet metal parts
technical data:
table size 1100 x 800 mm
max. sheet thickness 3,0 / 2,0 mm
Bp37mohlp2
stroke max. 100 mm
transmission ratio of the shafts 1 : 4
max. projection of the flanges on the part to be
to be trimmed 335 mm
Air pressure max. 8,0 Kh/cm²
power supply 220 - 380 V / 50 Hz
dimensions approx. 2000 x 1300 x 1600 mm
weight approx. 500 kg
used, in good condi...
For sale:
Very neat used Kaltenbach sawing machine KKS 450-E ( new model )
- start / stop cycle by means of push button,
- large door, easy maintenance,
F0wa900n
- All buttons are equipped with LED lighting,
- very easy to connect to an automatic push-up system,
- sequence switching by relay, no PLC, so no programmers needed in case of failure,
- Height and lower table position very easy to adjust,
- safety cover incl. safety switch,
- Saw door security by means of door switch,
- Cooling by mean...
grinding wheel diameter: mm
saw blade diameter: mm
total power requirement: 1,65 kW
weight of the machine approx.: 620 kg
Bl7abym0
Saw Blade Sharpening Machine
Machine not complete - grinding spindle motor missing!
for sale as spare part dispenser!
HSS circular saw sharpening machine
Brand: Ohler
Bd3mynoa3m
Type: SA 1250
Year of manufacture: 1979
for saws up to 1250mm.
Manufacturer: CW Kreher Olbernhau
Year of construction: unknown (1985)
Engines: Bolted circle saws 2.2 kW (from above)
Drill 3 kW (from below)
Hole diameter: approx. 60 to 300 mm
Max. material thickness: 80 mm
Drill diameter: max. 100 mm
Drill depth: max. 100 mm
Bhr98vujhs
Rotational speed: 4 steps, adjustment via V-belt
Use: cutting out blanks for bowls, plates or similar round turned parts for turning.
Sawing from above up to a maximum diameter of approx. 300 mm,
drilling from below up to...
Vollmer circular saw setting machine type PH402, M.-No. 602
for circular saws 150 - 1000 mm Ø and more
blade thickness 2 - 4,5 or 3-5 mm
tooth pitch from 10 mm
incl. group toothing
TOP-condition almost new not used
P8s2zv
Used saw blade sharpening machine
Int. Art. No. m3087
Manufacturer Schmidt Tempo
Type ASG 400 A
Year of manufacture 1969
Ma. No. 50-162
grinding range 20 - 400 mm
Cutting width up to 6 mm
Weight 620 kg
With operating instructions
Scope as shown. No other accessories included.
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
We would be pleased to send you further photos by e-mail.
A forklift/crane for loading is available.
We reserve the right of pri...
-circular knife bread slicer
-cutting width 400mm
Hdqtnsd
-Apparent thickness adjustable
CATALOG NUMBER 5481
TECHNICAL DATA
- 125mm grinding wheel diameter
- 20mm diameter wheel hole
- spindle speed 3574 rpm
- max diameter of sharpened saw 630mm
- number of teeth of sharpened saw 1 ÷ 300
- grinding wheel angle relative to the horizontal axis ± 360 °
- vertical wheel movement ± 50mm
- 315mm wheel offset levels
- max stroke of the 265mm feed table
- working feed speed 0.2 ÷ 2m / min
- gain value when sharpening 0 ÷ 0.99mm
- number of programmable sharpening transitions 0 ÷ 99
- number...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Morlock Motors official partner of Machineseeker and Truckscout24
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
Photo gallery: the 10 strongest forklift trucks in the world
Sell now on Machineseeker! Over 220,000 inquiries per month
