Used Chips for sale (4,895)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Rjdpeznca Hjfx Akisch Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge with control

Condition: used, Tilting container for forklifts, RMS Rotherm Mechanical Systems, type KK - 125 Chip container - bulk container - folding container Manufacturer's No.: 89218 Year of manufacture: 2012 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork pockets: 200 x 60 mm Fork spacing, inside/outside: 505/900 mm - Manual locking device for the tilting container - Tilting process is initiated by gravity - 4 plastic support rollers, Ø 175 mm, 2 swiveling, 1 with locking mechanism - Fork pockets / forklift receiver Weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with frame: 1200 mm Redpfx Aez Rnb Hjkiech Very good condition Suitable for collecting, storing, and transferring valuable materials.

Condition: good (used), Year of construction: 1982, Chip conveyor, Manufacturer: SILISTRA, Type: TCA 280X4710, year 1982, with coolant pump. Was previously connected to a CNC boring mill. Overall length: 5200 mm Neck width: 410 mm Rcjdpfxswnpngo Akijh Neck height: 220 mm Neck length: 4700 mm Discharge height: 800 mm Total height: 1100 mm Weight approx. 1200 kg. In good condition.

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm Rcedpfx Ajz D Sk Rjkieh motor 30 kW with hydraulic pusher

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Rodpfx Aoz Sp Ecskisch

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Rsdpfxe Af Uxme Akisch feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - roller width 780mm - roller diameter 1000mm - blade length 780mm - number of blades 2 pcs - screen dimensions 55x55mm - 4 geared pull rollers at the bottom - lower roller motor 5.5kW - 3 geared pull rollers at the top - upper roller motor 5.5kW - belt conveyor - belt conveyor length 4300mm - belt conveyor width 600mm - belt feed motor 2.2kW - main motor 90kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H) 4600x2350x1700mm - overall feeder dimensions (L/W/H) 4550x980x970mm - total weight approximately 11000kg – manufactured in Germany, - auto-reverse (with adjustable settings) – used shredder, very good condition Net price: 231900 PLN Net price: 53930 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may change in case of significant exchange rate fluctuations) Rjdps Af Uuujfx Akiech

Condition: used, total length: 2,100 mm, total height: 1,500 mm, total width: 650 mm, conveyor belt width: 620 mm, ejection height: 1,000 mm, -KOM 1607- We are offering you here a scraper belt conveyor from May – Fran GMBH Essen. Dimensions can be found in the attached sketch. Rodpfxjyvfi Ij Akioch The machine can be inspected and tested under power at our warehouse. We offer several chip conveyors and would be happy to provide you with a package price.

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Rcsdjykmlmspfx Akieh Sale by customer order.

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,500 kg, fuel type: electric, – Year of manufacture: 2012 – DTR, CE certified Rcjdpfx Ao Aa Iukskioh – Capacity: up to 20 m³/h TECHNICAL SPECIFICATIONS: – Inlet width: 500 mm – Inlet height of the feeder: 180 mm – Diameter of the knife shaft: 450 mm – Width of the knife shaft: 515 mm – Power of the main motor: 45 kW – Number of knives: 3 pcs – Knife length: 515 mm – Toothed pull shaft (bottom) – Power of the motor for the bottom toothed pull shaft: 2.2 kW – Toothed pull shaft (top) – Power of the motor for the top pull shaft: 2.2 kW – (Length / Width) of the belt feeder: 5000 x 500 mm – (Length / Width) of the receiving belt table: 3500 x 470 mm – Belt feed, forward/backward – Screen dimensions: 50 x 50 mm Transport dimensions: – Length: 700 cm – Width: 240 cm – Height: 220 cm – Weight: ~2500 kg

Condition: used, color: orange, = Additional options and accessories = Redpfx Ao Af S Hdjkiech - Spare wheel

Condition: good (used), functionality: fully functional, power: 0.37 kW (0.50 HP), motor manufacturer: SEW Eurodrive, Equipment: type plate available, -KOM 3157- Offered here is a magnetic belt conveyor from CHEMAPERM. The motor of the magnetic belt conveyor has been tested and is fully functional. Dimensions can be taken from the pictures. Specifications of the magnetic belt conveyor: Manufacturer: ChemaPerm Type: 62942 Year of manufacture: 1978 Rsdpfx Aexrcktokiech Motor specifications according to nameplate: Manufacturer: SEW Eurodrive Type: SA47 D171D4 Power: 0.37kW Revolutions/min: 1380/37

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm Rcodpfxjza Eipj Akioh - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, functionality: unexamined, total length: 8,200 mm, total height: 750 mm, total width: 450 mm, conveyor belt width: 400 mm, ejection height: 700 mm, -KOM 1561- Offered is a well-maintained scraper conveyor with high discharge. All further data and dimensions can be taken from the pictures. Note: The unit is located in our warehouse and can be inspected under power. The hinged belt is in good condition. Rjdpfxoyvh I Ij Akisch

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Rotor width: 820 mm Redpfx Aszrlu Uskiech Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Screen size: 20 mm In fully functional condition, ready for immediate use.

Condition: excellent (used), CATALOGUE NUMBER 7610 Technical data: - inlet width 410mm - inlet height 140mm - roller width 430mm - roller diameter 400mm - number of knives 2 pcs - screen dimensions 80x130mm - top roller, grooved - bottom 2 rollers, grooved - feed belt length 2850mm - feed belt width 390mm - auto-reverse - main motor 30kW - feed motor 2 x 2.2kW - machine dimensions (L/W/H) 4800x1550x1200mm - weight approximately 2200kg Rcsdpfx Akeztq Uvjioh ADVANTAGES - Made in Poland - Auto-reverse - With feed conveyor - DTR documentation - Used shredder, very good condition Net price: 75900 PLN Net price: 17651 EUR Net price calculated using the exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, DCV11300 TC VIBER The DCV11300 TC VIBER is a high-performance industrial dust extraction unit designed for operation under demanding conditions in the woodworking and furniture industries. Equipped with advanced filtration, safety and energy recovery systems, it guarantees reliability, cleanliness and cost efficiency in every production facility. Main Advantages of the Machine Extraction capacity of 11,300 m³/h – effective removal of chips, dust and sawdust from multiple workstations. VIBER system – automatic, trouble-free filter shaking ensuring constant operating parameters. DAMAGE PROTECT module – mechanical protection of the impeller against damage caused by solid contaminants. TC housing – effective acoustic insulation and vibration reduction. REHEAT system – recovery of heat from the extracted air for energy savings. Construction and Technology The DCV11300 TC VIBER central dust extraction unit has been designed for many years of trouble-free operation. The heart of the system is an 11 kW motor with a dynamically balanced impeller, ensuring stable and quiet operation. The construction is based on a rigid steel frame with additional inspection doors, making operation and bag replacement easier. Precision and Work Efficiency The high suction velocity of 28–32 m/s and 64 polyester filters (5 microns) ensure effective air purification even in intensively operated facilities. The BIG-BAG system or metal containers on wheels allow for efficient waste removal. Application The DCV11300 TC VIBER is an ideal woodworking dust extraction unit for facilities: producing furniture and wooden components, with multiple workstations, using panel saws, edgebanders, sanders and saws, looking for a central solution (central dust extraction system). Standard Equipment Control cabinet with easy access, Rodpfxoudalwe Akijch Complete set of polyester filters, VIBER system with an automatic cycle, TC sound-absorbing housing, REHEAT and DAMAGE PROTECT modules. Technical Specifications Power supply voltage — 400 V Motor power — 11 kW Rotational speed — 3000 rpm Capacity — 11,300 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Inlet / outlet diameter — 350 mm / 500 mm Filter material — Polyester, 5 microns / filter category "G" Number of filters — 64 pcs. Filter dimensions — Φ160 × 960 mm Overall dimensions — 1190 × 3160 × 2320 mm Net weight — 710 kg

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Weight: 2,000 kg Rjdpfx Asyzhdyokioch Motor power: 22 kW Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Year of construction: 1990, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / DAS406 Year of production: 1990 Metal chain width: 330 mm Distance guide lanes: approx. 300 mm Chip outlet length 2000/1000 mm Rsdpfjgxqgzox Akiech Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 1100 mm

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use Rcodew Nq Amopfx Akieh - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: like new (used), Year of construction: 2009, in very good condition. Rcodpfx Akezz Siqeish

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Rcedoq Nmw Ijpfx Akijh

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. Redpfjycgtbsx Akijch The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Condition: used, Debus DDS 118: High-performance industrial compressed air chip extractor This specialized machine was designed specifically for the efficient extraction of metal chips and adhering liquids (such as emulsions or oils) directly at machine tools. • Filter container with tangential suction nozzle and integrated cyclone pre-separator • Stainless steel wire mesh serves as the filter for separating liquid particles • Easy emptying via a detachable collection container including an inserted chip basket • Chip basket with integrated float device • Robust construction made of plastic-coated steel for long-term operation Rcjdpoivd A Uefx Akijh • Good handling due to smooth-running rollers - Manufacturer: Debus - Model: DDS 118 - Operating pressure: 4.6 m³/min - Air requirement: approx. 40 liters - Weight: 55 cm long, 60 cm wide, 150 cm high - Year of manufacture: 2016 - New price (approx.): €4,604.00 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Ringler RA 320-D 2x3.0 Vacuum Chip Extractor 6.0 kW Rcsdpfx Akezyqz Asijh Weight: 348 kg 2895 rpm You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.