Used Chip Centrifuge for sale (5,799)

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: P13.19W3479.01, MAYFRAN CENTRIFUGE VBU 300 400V/50Hz 0.55kW 1.29A Inlet diameter 400mm Equipped with SEW Motor DRN80MK4, manufactured in 2019, and a speed inductive sensor. The machine is almost unused, with original paint and no signs of wear. Complete with steel frame, RAL 5010 color. Fully operational machine, requiring only wiring. Available for testing. Frame dimensions: 1580x560x1680 (WxLxH) Footprint dimensions: 1580x680x1680 (WxLxH) Centrifuge inlet height from the ground: 2300, inlet diameter 400, equipped with a steel protection net. Fpjdozky Awepfx Aivon Outlet diameter: 200mm - Current height approx. 1000 - Maximum height approx. 1465

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: Fpedpfxsw Nqu As Aivjn - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! Fpodpfxsw Nq Amo Aiven - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: good (used), Filling capacity: 35 kg. Fpodpfx Aiegl Auxovsn

Condition: ready for operation (used), Chip – Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500 mm - Speed / power: 1000 rpm, adjustable up to a maximum of 1400 rpm Fpjdpjzylzqjfx Aiven - Includes documentation & electrical diagram Dimensions L x W x H: 0.7 x 0.7 x 1.2 meters / Weight approx. 250 kg Errors and omissions excepted.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, Fpedpszi Upcefx Aivjn FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press Fpedpfx Aijz D Uvpjvjn • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 3,547 mm, total height: 2,163 mm, total width: 260 mm, conveyor belt width: 260 mm, delivery head: 1,700 mm, ejection height: 1,700 mm, conveying length: 3,567 mm, transport height: 1,700 mm, Magnetic scraper conveyors with a conveying capacity of up to 60 kg/h, drive motor 0.4 kW. Both conveyors were only used for a short period, less than 100 operating hours. They can be delivered individually or as a package with a suitable chip centrifuge, which was also only used for a short period. Fpedpfozwpnvex Aivjn

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply Fjdpfezhui Hex Aivopn * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Fpedpfx Aijy Ifm Esvsn

Year of construction: 2012, condition: used, functionality: fully functional, PERMOLEX-POLAR K 81 H – a complete process line for de-oiling and separating metal chips. For sale is a complete industrial system for de-oiling, oil removal, and separation of aluminum and steel chips. Type: Permolex-Polar K 81 H Year of manufacture: 2012 Fpsdpfez Hw R Uex Aivon Application: de-oiling and separation of loose aluminum and steel chips Capacity: max. approx. 3.4–6 m³/h Throughput: approx. 160 tons of chips per month Control: Siemens SIMATIC S7-300 / operator panel TP177B Rotational speed: 980 rpm Power supply: 400 V / 50 Hz Offered for sale is a complete set of equipment forming an industrial system for centrifuging liquids from chips and further separating aluminum and steel chips. The process includes: chip feeding → buffer tank → conveyor → PERMOLEX-POLAR centrifuge → oil/coolant discharge → magnetic separation → chip separation → transport to containers. Chip transfer points are enclosed, which reduces the lifting of material during transport. The system includes: • PERMOLEX-POLAR K 81 H chip centrifuge, • approx. 7.5 m³ buffer tank for chips, • 3 x KF 600 scraper conveyor, • double separating shaft with neodymium magnets, • vibratory conveyor, • approx. 250 l oil/coolant tank, • submersible pumps, • floor trays, • complete Rittal control cabinet, • Siemens S7-300 controller, • TP177B operator panel, • supporting structures and system components. Application The system is designed for the continuous processing of a mixture of aluminum and steel chips. The process includes: chip feeding → de-oiling/oil removal → separation of steel fraction → transport of separated chips to tanks/containers. The system is designed for handling large quantities of material and features automatic control and level monitoring. Technical condition Used equipment from an industrial installation. The photos show signs of normal operation, dirt, and surface wear on the components. It is recommended to inspect and verify the completeness and technical condition of individual components before purchase. Sold as a complete system or individually, as agreed. Due to its size and complex structure, dismantling, loading, and transport require prior agreement. Technical/design documentation regarding the equipment layout can be provided to interested buyers. 📞 Contact Interested parties are invited to contact us for pricing, additional photos, technical documentation, and to arrange an inspection.

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Fpjdpjrrwclefx Aivon

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Fodpfjxhffrex Aivspn Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Fpedexv Dhnspfx Aiven Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Fjdexukkyspfx Aivopn Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Fpodownx Ngspfx Aivon Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Centrifuge Hydraulic unit 2 feed pumps 1 flocculant pump Fsdpfx Aez Icw Aoivepn 1 flocculant preparation tank 1 electrical control panel

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan Fpedpfx Aon Srvyjiven -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Condition: used, Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm Fpedpfjrh Nidjx Aivsn -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1011/33, High-quality pharmaceutical laboratory centrifuge HEINKEL V 500 TP – Complete system including control system and accessories NEW PRICE: €330,000 For sale is a professional, vertical pilot plant centrifuge of the type HEINKEL V 500 TP in excellent, like-new condition. The system is specifically designed for feasibility studies, product development, and small-scale production in the pharmaceutical and fine chemical industries and meets the highest cGMP standards. This is a complete system ready for immediate use, including the original control cabinet and the integrated operating unit (HMI). Thanks to the mobile stainless steel frame (“Plug and Use”), the system can be moved flexibly within the room or integrated into existing processes. Technical data & highlights: Manufacturer: HEINKEL Drying and Separation Group Model: V 500 TP (Vertical Centrifuge) Year of manufacture: 2021 / 2022 Drum diameter: 500 mm Nominal volume / filling weight: 30 liters / approx. 36–38 kg Material: High-quality stainless steel (product-contact parts with high surface quality, Ra < 0.8 µm) [If applicable, add "Alloy C22 / Hastelloy" here] Approval: CE marking available Documentation: Complete technical documentation Fsdpfx Aoz Euz Ioivspn Scope of delivery: HEINKEL V 500 TP centrifuge on a mobile stainless steel frame Original, free-standing control cabinet (including cooling unit) Integrated control panel (touch-HMI) directly on the machine Original HEINKEL accessories and tool case

Condition: used, Technical details: drum diameter: 600 mm weight of the machine ca.: 0,42 t Lanner batch wringer ME61-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 100 Liter/max. 200 kg -rotation speed max. 740 min-1 -power 5,5 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Fpsdoft Tkqjpfx Aivjn Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray This is not a used machine! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1996, Radial fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, suction, chip blower, high performance fan -Manufacturer: Reitz, radial fan chip extraction fan type MXE 020-018030-00 -Engine: Dutchi DM 160 MX2 15 kW -Speed: 2935 rpm -Volume flow: 180 m³/min / 10800 m³/h -Connection input: Ø 245 mm Fodpfxoqvp N Do Aivopn -Connection output: Ø 390 mm -Dimensions: 1460/1160/H1500 mm -Weight: 392 kg

Condition: used, Technical details: drum diameter: 400 mm revolutions per minute: 980 U/min total power requirement: 2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control Fpodpfxoft Tipe Aivon -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray This is not a used machine! Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2023, condition: used, functionality: fully functional, Hosokawa Alpine hammer mill Type UPZ 500 Year of construction: 2023 Weight: 1300 kg Capacity/max: 5,910 l/min Dimensions: approx. 230x110x129 cm Documentation available This lot is located in room 3 Fedpfxoz Iam Is Aivepn Hosokawa Alpine centrifugal fan with electric motor on a steel base frame. Details: Brand: Hosokawa Alpine Type: centrifugal fan Drive: electric motor Design: housing with protective cover and connection/piping Frame: steel base frame Color: gray with blue motor Condition: used

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Fjdpfx Aszmt Ufoivspn Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.