Chip conveyor

BMF Kratzbandförderer

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Fedpfxeu Rl Ruo Ahlepk

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Fpedjwxdqkepfx Ahlsk Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1250 mm turning length: 6000 mm spindle bore: 130 mm Turning rate: 5 - 710 U/min. turning diameter over bed slide: 850 Fedpfxeyktvxo Ahlspk total power requirement: 37/52 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady *

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 Fedpfx Aon Hwl Ashljpk with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: used, Bark remover Cambio 500 in good condition Fodpjwi Iz Iofx Ahlepk

Condition: excellent (used), Year of construction: 2014, Scheuch cyclone with rotary valve and spark extinguisher for wood chips Cyclone as bunker or silo structure with attached rotary valve Fpjdpfxouvdplo Ahljk Designation: fru v 1000-04/014-B Serial No.:/Year: F-1633/14 System is dismantled and immediately available

Condition: used, Year of construction: 1972, faceplate diameter 1200 mm swing diameter 1600 mm turning height 1250 mm slide adjustment 800 mm Control Siemens type 840 c power capacity 56 kW The machine was overhauled and rebuilt by Seidler. No. 97237 No. 37 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Fsdpoyqvfijfx Ahlopk

Condition: used, Year of construction: 2015, faceplate diameter 1250 mm swing diameter 1500 mm turning height 1250 mm Control Siemens type 840 Dsl tool taper 4 Pos. The machine was overhauled in 2015 by Matuschek. Siemens 840 DSL Shop Turn Fodpfjyqr S Esx Ahljpk The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: HEIDENHAIN TNC 530, workpiece diameter (max.): 3,000 mm, workpiece weight (max.): 60,000 kg, total height: 5,560 mm, total length: 11,550 mm, total width: 10,750 mm, table width: 3,000 mm, table height: 800 mm, table length: 3,000 mm, table load: 60,000 kg, rotary table diameter: 3,000 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, overall weight: 87,000 kg, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a used FUE 125 W/4 milling and boring machine, manufactured in 2011, equipped with the HEIDENHAIN iTNC 530 HSCI control system and HR410 handwheel, HEIDENHAIN digital drives, standard design, metric version, AC 3PE˜50Hz, 400V connection. Travel ranges: • X-axis (longitudinal): 4,000 mm • Y-axis (cross): 1,250 mm • W-axis (spindle extension): 800 mm, spindle diameter 130 mm • Z-axis (vertical): 2,500 mm • Rapid traverse X1: 20,000 mm/min • Rapid traverse Y, Z1: 10,000 mm/min Machine specifications: • Metric version: Yes • Spindle head design: Extendable working spindle (W axis) + 3 automatically exchangeable accessory heads • Tool clamping: ISO 50 • Power: 28 kW • Spindle taper: ISO 50, DIN 69 871 clamping • Automatic accessory head IPS with automatic spindle positioning for H/V orientation, 2,500 rpm / 1,200 Nm • Automatic accessory head IZN1 for turning, CAPTO 6 clamping • Automatic accessory head IZN2 for turning, CAPTO 6 clamping Control and accessories: • HEIDENHAIN iTNC 530 HSCI • HEIDENHAIN HR 410 wired handwheel • Cooling unit for spindle head thermal stabilization • High-pressure through-spindle cooling: 20 bar / 30 l/min / 180 l • External low-pressure cooling: 5 bar / 60 l/min / 1,200 l Clamping area in front of the machine: Optional Currently equipped with a rotary traversing table (KES) with carousel function (option: configurable as plate or table) • Dimensions: 3,000 x 3,000 mm, V (Y) axis = 1,500 mm • Load capacity: 60,000 kg (hydrostatic) • Speed range: 1 - 80 rpm • T-slot dimension (base clamping plate): 28 H11, central 28 H8 • T-slot pitch and count: 200 mm, 15 slots • Centering hole: 100 H7 Fjdpfx Ahexp U U Selopk • Rotational axis drives: MASTER-SLAVE, 2x SIEMENS motor • Additional carousel plate, diameter 3,000 mm, 8-way star-shaped slot configuration For further options and accessories or to arrange an inspection, please contact us.

Condition: used, Year of construction: 1992, faceplate diameter 1600 mm swing diameter 2000 mm turning height 1600 mm Control Siemens Sinumerik 805 turning speeds 1-250 U/min Table load 12000 kg main drive device 56 Control system manufacturer Siemens type Sinumerik 805 Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- Fpedoyqtnzjpfx Ahljk binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team