Used Chipper for sale (480)

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Itjdpfx Aov Sqrpsacsn Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Motor: 110 kW Machine weight: approx. 8,000 kg Ijdpfx Aogabfqeacetn

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Itodjv Evx Uopfx Aacsn Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: ready for operation (used), Year of construction: 1985, Disc chipper for production of cellulose chips. Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Iodpjw Ib R Eefx Aacetn Net weight: 27000 jg

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt Iodpfxsful Uis Aacjtn

Condition: like new (used), functionality: fully functional, with Scania 8-cylinder diesel engine Itjdpfxjwc D Hgo Aacen up to 60 cm trunk diameter with tracked chassis only 1,000 hours

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Ijdped Dgw Uofx Aacotn Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg Iodpfsgabfbex Aacotn

Condition: used, Year of construction: 2011, operating hours: 744 h, overall weight: 1,500 kg, fuel: electricity, No. 04437 Chipper / Shredder Balduf PZ 63-1 Used, year of manufacture 2011, only 744 operating hours Made in Germany For various materials, e.g. wood, plastic, etc. Hopper opening 800 x 630 mm Electrical connection 400 V / 19.25 kW Rotor diameter 260 mm Rotor width 630 mm 30 interchangeable blades 30 x 30 x 15 (15 standard, 15 concave) Sieve diameter 30 mm SPS Siemens S 7 200 control system Automatic & manual operation possible Hydraulic operating pressure 160 bar Suction nozzle diameter 160 mm Including technical documentation Transport dimensions approx. 1800 x 1250 x 1800 mm LWH Weight 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Itsdjuxbccjpfx Aacjn Terms of delivery: ex warehouse or location

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Inlet height: 180 mm Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Electrical panel Ready for operation Itodpowiuywjfx Aacsn Year of manufacture: 2000

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2455x2168x1730 mm Itjdpfxovz Etae Aacjn Weight 3200 kg Total power requirement 37 kw

Condition: new, Year of construction: 2025, Drum chipper series ATH 220 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz Itjdewbv Eropfx Aacjn - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, - 1 discharge power 5,5 (7,5) kW (PS) throughput approx. ……………. 800 kg/h electric outlet 400V 50Hz (3 phases) fuse 20 A dimensions: length 725 mm width 690 mm height 1 520 mm weight 70 kg material 1.4301 / AISI 304 Itsdpfx Aeb Nvr Isacsn discharge height 475 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: new, Year of construction: 2025, power: 200 kW (271.92 HP), overall weight: 7,800 kg, SALE FROM STOCK Iodpfxewy Dthe Aacotn Max Log Diameter to Be Peeled: 40 cm Peeling Capacity: 20 tons/hour Maximum Peeling Time: 150 seconds Electric Automation: Available Motor Power: 200 kW Log Length to Be Peeled: Over 4 meters Rotor Speed: 1000 RPM Total Machine Weight: 8.7 tons

Condition: used, Year of construction: 2018, No. 3085 Chipper / material shredder WEIMA WLK 800 used, year of construction 08/2018 Itsdskzkwmjpfx Aacjn approx. 1200 operating hours For various materials such as hard plastics, paper, foils, filaments, wood or textiles. Feed opening 800 x 1450 mm F rotor Rotor diameter 260 mm Rotor speed approx. 100 rpm Motor power 30 kW knife screwed incl. various spare knives and sieves Transport dimensions approx. 3400 x 1750 x 2100 mm LWH Weight approx. 2500 kg Sales on behalf of customers, from the Hesse location In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Condition: good (used), Year of construction: 2000, Chipper with horizontal feed , but vibrating chute is not included Ijdpek Twl Tofx Aacetn working width 350 mm Motor rotor 30 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2765x2520x1730 mm Itsdpfx Aasvz Er Necsn Weight 3600 kg Total power requirement 55 kw

Condition: new, Year of construction: 2025, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm Isdpeuz Hmxefx Aacetn - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, power 11 (15) kW (PS) throughput approx. ……………..… 1500 kg/h electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: length 810 mm width 725 mm height 1 570 mm weight 125 kg Iodpfx Asb Nvtkjacetn material 1.4301 / AISI 304 discharge height 495 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: used, Second Hand machine Isdpedqhtcsfx Aacjtn Log Diameter: up to 60cm Speed: up to 60m/min. Weight: 5t

Condition: excellent (used), functionality: fully functional, motor power 11kW bin dimensions 940x700mm hydraulic pressure unit shaft length 700mm Iodpfxow Imr Us Aacetn shaft speed 110 RPM capacity 180-220 kg/h

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Itjdpfx Aju Rl Rusacon Motor 75 kw with frequency converter for variable speed no vibrating chute included

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Itjdpsgw Sxzefx Aacjn Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, motor power 11kW Iodpow H R Hzofx Aacetn bin dimensions 940x700mm hydraulic pressure unit shaft length 700mm shaft speed 110 RPM capacity 180-220 kg/h

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw frequency-controlled for variable speed without vibrating chute Itsdpfou Rl Sfjx Aacon