Used Channel for sale (945)

Condition: used, BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Applications: Coating technology, semiconductor processing, surface analysis, electron microscopy Chodpfexl A Edsx Ap Djd • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for power supply and lamp • Power supply: 220 V Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning the dispensed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components in separate channels simultaneously towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the application of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio, ensuring maximum process reliability. At the same time, pressure-, moisture- or shear-sensitive potting media can also be processed gently without any changes to the material being feared. Users also benefit from simple and quick maintenance, long service life and considerably reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating or dispensing head heating, these systems can be flexibly adapted to the respective task. Your advantages No dependence of dispensing accuracy on temperature, pressure or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (material and application-related) Important functions Simultaneous actuation of the cylinders by a common stroke mechanism enables a homogeneous mixing ratio Sensory monitoring of the inlet and outlet valves as well as the cylinder filling Temperature control of the material by mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure and viscosity of the casting resin Precisely reproducible and highly accurate results Maximum process reliability Application Filling potting, sealing, bonding, application of thermally conductive materials, encapsulation (glob top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on the mode of operation Chedpezc Nplefx Ap Dod "Everything from one source: We will gladly offer you suitable financing for your project." You can find more dispensers - new and used - in our shop! International shipping costs on request!

Condition: used, mileage: 106,745 km, power: 140 kW (190.35 HP), first registration: 08/2023, fuel type: diesel, overall weight: 3,100 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 5,140 mm, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number: 263360 1st owner, accident-free, with service booklet, non-smoking vehicle ---- HIGHLIGHTS & PACKAGES * Electric operation for sliding door, left * Interior lighting package * Parking package * Mirror package * Auxiliary hot water heater * Auxiliary heater, electric * BlueEFFICIENCY package * AMG Line * Table package * V-Class EDITION * Aerodynamics package ASSISTANCE SYSTEMS * Active Distance Assist DISTRONIC * Active Brake Assist * HOLD function * Mercedes-Benz emergency call system * Breakdown management * PARKTRONIC * Rear view camera * Blind Spot Assist * Rain sensor * Lane package * Lane Keeping Assist * ATTENTION ASSIST * Headlight Assist * Highbeam Assist PLUS * ECO Start/Stop function ENGINE, TRANSMISSION & CHASSIS * AGILITY CONTROL chassis * 9G-TRONIC * Permanent all-wheel drive AUDIO & COMMUNICATION * Digital radio (DAB) * Touchpad * 2-way speakers, front and rear * Warning lamp for windshield washer fluid level * Communication module (LTE) for digital services * Instrument cluster with color display * MBUX Multimediasystem Mid INTERIOR * AMG spoiler on tailgate * Illuminated "Mercedes-Benz" lettering on door sills * Steering wheel adjustable for inclination and height * Leather steering wheel * Multifunction steering wheel with trip computer * Display diagonal 26 cm (10.25?) * Switch position, lower control panel * 12 V socket, luggage compartment/loading area * 12V sockets for seat rows, rear right and left * Lockable glove compartment * AMG trim elements * Center console with roller blind * Warm air channel to passenger compartment * Seat heating for front passenger * Seat heating for driver * Semiautomatic climate control system TEMPMATIC * Climate zone 1 (cold/comfort) * Climate control, semi-automatic, TEMPMATIC in the rear * Comfort overhead control panel * Lighting in grab handles, rear, with reading spotlight * Footwell lighting, front * Airbag, front passenger * Comfort driver's seat * Comfort front passenger seat * Thorax-pelvis sidebag, driver * Thorax-pelvis sidebag, front passenger * Windowbags for driver and front passenger * Stowage net, driver's seat backrest * Stowage net, front passenger's seat backrest * Armrests for seating in the passenger compartment * Seat rail system with quick-release mechanism * Carpeting in the rear * Carpeting in the vehicle interior, front * Fabric Santos black * Stowage nets on backrests of individual seats in the rear * Headliner, black * Grab handle in the rear * Floor mats, velour * Opening windows, passenger compartment, rear, electric LIGHTS & VISION * Ambient lighting in the exterior mirrors * Ambient lighting, tailgate * Adaptive brake lights * LED Intelligent Light System * Tail lights, brake lights and turn indicators in LED technology * Window, front left, fixed in the side wall/sliding door WHEELS * Premium tire protection (3 years) TECHNOLOGY & SAFETY * Hill-start assist * Exterior and interior mirrors, automatically dimming * Comfort opening and closing with IR remote control * Seatbelt warning for front passenger seat * Childproof lock on doors in the passenger compartment * Pedestrian protection Csdpfx Aj Aau Azjp Dohd EXTERIOR * Electric operation for sliding door, right * EASY-PACK tailgate * Brake calipers with Mercedes-Benz lettering * AMG front bumper with trim elements in black * Bumpers and body panels painted in vehicle color * Side skirts, exterior * Roof rails * Exterior mirrors painted in black * Exterior mirrors, automatically folding * Exterior mirro

Condition: used, F&P Electronic Temp-star TS.Mulit 5 A hot runner controller, used in plastic injection molding for the precise Csdpo Abx Hgsfx Ap Djhd temperature control of hot runners/channels within molds. Overview of your module: Manufacturer: F&P Electronic GmbH (Waldkirch, Germany) Series: Temp-Star (abbreviated as TS.MULTI 5) Function: Multi-channel temperature control (typically 5 zones/channels, as indicated by the designation "MULTI 5") for injection molds.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. Chedpezmx Nuofx Ap Ded The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Codpsz A Tzujfx Ap Djhd Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Codjz A T Hdspfx Ap Dehd Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2008, Schröder IMAX 350 F Compact Injector The process engineering principle of the IMAX Technology is based on the classical brine injection method using hollow needles. The brine or emulsion to be injected is transported through a pump and pipe system directly into the product. In addition to boneless products, bone-in meat, chicken, or fish can also be injected. Codpfjz A T H Rex Ap Dshd Manufacturer: Schröder Model: IMAX 350 F Year: 2008 Channel width: 350 mm Injector area/hour: Up to a maximum of 75 m2 Cycles: 15 to 60 per minute Capacity: Maximum 3,000 kg/h (depends on the product) Maximum product height: 165 mm Number of needles: 102 Brine pressure: 0.5 – 4.5 bar Power: 8 kW / 50 Hz Machine dimensions (L x W x H): 1,850 x 950 x 1,950 mm Machine weight: 475 kg.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Horizontal baling press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device, semi-automatic. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Codpfxjz A T Tqe Ap Dehd The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, mileage: 117,050 km, power: 125 kW (169.95 HP), first registration: 05/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 1083X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle selection at autonext. Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### Chjdpfxezuu Aye Ap Ded ----Get a clear impression now: Watch the video via the YouTube link to see the vehicle completely from the outside and inside: Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, only at Mercedes Benz Next service in 329 days Like-new all-weather tires in the front Body style: Maxi van Trailer hitch, increased trailer load 2,800 kg 2 sliding doors (on both sides) Rear-view camera Navigation system Air conditioning (Tempmatik) Heated seats Auxiliary heating Loading area length: 4.35m Loading area height: 1.95m Loading area width: 1.77m ---- Special equipment: * Multimedia system MBUX (touchscreen 7") * Hands-free system Bluetooth * Steering wheel with multi-function buttons * Storage compartment in the headliner of the driver's cabin * Acoustic package * Trailer hitch: ball head, for increased trailer load * Trailer socket 13-pin * DAB tuner (digital radio reception) * Ceiling light in the cargo area with door contact * Entry handle on the rear pillar, rear right * Tachograph operation in the front under the headliner * Digital tachograph * Suspension: Stabilization level II * Remote control for auxiliary heating * Vehicle without vehicle lowering * Generator 250 A * Cup holders in the front * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Folding cover for storage compartment * Air conditioning (Tempmatik) * Comfort lighting in the passenger/cargo area * Cargo area partition with window * Cable channel on the rear portal * Cable channel on the side wall * Navigation system for multimedia system MBUX * Crossmember with integrated step * Smoker's package * Spare wheel in driving condition * Spare wheel holder under the end of the frame including jack * Rear-view camera * Sliding door cargo/passenger compartment left * Off-road suspension * Seats in the driver's cabin: Double passenger seat * Seats in the driver's cabin: Driver's seat heated * Seats in the driver's cabin: Driver's seat comfort * Paneling in the cargo/passenger area: High plastic (up to the roof) * Tie-down rails in the cargo area - side wall on the safety belt * Front axle reinforced * Heat-insulating glazing (windshield with band filter at the top) * Auxiliary heating (hot water) Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake lights, airbag on the driver's side, hill-start assist, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, brake assist, automatic headlight activation, entry handle for sliding door on the cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driver assistance system: breakdown management, driver assistance system: crosswind assist, power windows electric 2-way, noise reduction exterior, 6-speed transmission - TSG (Eco Gear), body/

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 220 mm, travel distance Z-axis: 400 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 2, Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine. • Control feature: Independent dual-channel operation (Right & Left) • Machine condition: Good working condition, currently under power • Max. turning diameter: Ø 400 mm • Max. turning height: 400 mm Cjdpez Hb Htsfx Ap Djhd • Max. swing over bed: Ø 490 mm • Chuck size: 315 mm • Spindle nose: A2-8 • Turrets: 2 × 8/12-station turrets • Guideways: Box guideways (heavy duty) Additional equipment • Rear/side chip conveyor with cart • High-pressure coolant system Technical Specification Driven Tools No

Condition: excellent (used), I am offering for sale a Tektronix DPO 4032 Digital Phosphor Oscilloscope. The device is fully functional, starts up without any issues, and operates correctly. It displays the startup screen and the measurement screen, as shown in the attached photos. The cosmetic condition is good – it has normal signs of use resulting from operation. Technical specifications: • Manufacturer: Tektronix • Model: DPO 4032 • Type: Digital Phosphor Oscilloscope • Bandwidth: 350 MHz • Sampling rate: up to 2.5 GS/s • 2 analog channels Chodpfxjz Snqvj Ap Ded • Color LCD display • Interfaces: LAN, USB Host, USB Device, VGA, CompactFlash • Power supply: 100–240 V AC, 50–60 Hz Condition: • Fully functional. • The device starts up and operates correctly. • Sold without measurement probes and other accessories. • The set includes only the oscilloscope shown in the photos.

Condition: new, empty load weight: 250 kg, maximum load weight: 1,250 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 300 mm, tire size: 145/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT1500 301x126. Chedpfxjq Slqte Ap Dod The standard equipment of the Anssems box trailer with brake includes aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs Chsdjxabacopfx Ap Djd - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 16 (d 1200) mm I-beam section - upend 50 x 15 (d 1000) mm L-beam 50 x 5 (d 1200) mm round material 40.0 (d 800) mm Chodpfx Apoxabr Se Djd bar material dia. max. 70 x 2.0 (d 1600 ) mm square material 80x30x3 (d 4000) mm channels - flange UNP 80 (d 800 ) mm bending speed 4.4 m/min roll diam. toproll 157 mm bore 50.0 mm oil volume 18.0 Liter total power requirement 1.1 kW weight 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Cjdpfx Apon Up R Ij Dshd 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: new, empty load weight: 340 kg, maximum load weight: 860 kg, overall weight: 1,200 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,260 mm, loading space height: 1,530 mm, tire size: 185/70r13, Low-loader with cover from the manufacturer ANSSEMS, model GTB1200 251x126 VT3. As standard equipment, the Anssems covered trailer with brakes features aluminum side walls, an aluminum cover with railing, a ramp, internal locking mechanisms, adjustable lashing eyes, profile channels for mounting accessories or securing the load, a support wheel, and a V-shaped drawbar. Financing: also possible without a down payment!!! Other sizes, equipment options, and more affordable models can be found in our shop: ----- You can also find all our cost-effective offers on our website. Germany-wide delivery possible (except to the islands)! Please feel free to ask us for prices. ----- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen. Tel: 0, Fax: Collection times: Monday - Friday – [time]. Chjdpfef Nt Dxex Ap Dod Collection is not possible on Saturdays!

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 injection molding machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 hours Clamping force: 23,000 kN / 2300 tons Screw diameter: 135 mm Injection volume: 8870 cm³ Control system: ENGEL Type: hydraulic, two-platen, large-size injection molding machine CLAMPING UNIT Clamping force: 23,000 kN (2300 tons) Dimensions of mounting plates: 2900 × 2500 mm Column spacing (H × V): 2000 × 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum distance between plates: 3800 mm Clamping system: hydraulic, two-platen INJECTION UNIT Injection unit: 11050 Screw diameter: 135 mm Injection volume: 8870 cm³ Injection shot weight (PS): 8071 g Maximum injection pressure: 1600 bar Screw replaced in 2011 Reinforced plasticizing unit, adapted for processing special materials ADDITIONAL EQUIPMENT Magnetic mold clamping system – functional 2 hydraulic cores 36 mold heating zones / hot runner channels 10 hydraulic cascades Mold tilting function ENGEL control system Robot: none MAGNETIC MOLD CLAMPING SYSTEM Cede Af Nkhepfx Ap Dshd The injection molding machine is equipped with functional magnetic plates for quick clamping of injection molds. The system reduces machine changeover time and facilitates the exchange of large and heavy molds, making it an important piece of additional equipment for an injection molding machine of this class. TRANSPORT DIMENSIONS AND WEIGHT Weight of main unit: approx. 113,000 kg Weight of control cabinet and additional components: approx. 18,000 kg Total approximate weight: approx. 131,000 kg (131 tons)

Condition: used, functionality: unexamined, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 130 mm, total length: 3,070 mm, table length: 2,800 mm, table width: 1,340 mm, total width: 1,800 mm, spindle speed (max.): 30,000 rpm, total height: 1,420 mm, overall weight: 500 kg, spindle motor power: 2,200 W, controller manufacturer: CNC-STEP (KinetiC-NC), number of axes: 3, Equipment: documentation/manual, We are selling our CNC portal milling machine, CNC-STEP High-Z T-Rex S-1224, with extensive equipment. The machine was purchased new in 2019 (total investment approximately €39,900 net) and is suitable for milling and engraving aluminum, plastic, and wood. Condition: The machine is generally functional. However, after being transported to its current location, it has not been fully reassembled and connected, so its functionality cannot currently be tested. An inspection is possible, but a test run under power is not. Technical data: - Travel distances: X 2,400 mm / Y 1,200 mm / Z 130 mm - Clamping area: 2,800 x 1,340 mm - Drive: 3 brushless stepper motors, ball screw spindles on all axes - Linear guides HIWIN/THK on all axes - Rapid traverse max. approx. 12,000 mm/min, working speed max. approx. 8,000 mm/min - Repeatability approx. 0.01 mm - Overall dimensions approx. 3,070 x 1,800 x 1,420 mm, weight approx. 500 kg Equipment: - High-frequency spindle Mechatron ATC-8022-30: 2.2 kW, 30,000 rpm, HSK25/ER16, pneumatic, with control cabinet and frequency inverter - 5 tool holders HSK-E-25-ER16, collet set ER16 - Tool length sensor - Vacuum table covering the entire area (MDF), 2 side channel blowers each 4 kW (high voltage) - Minimum quantity lubrication - T-slot table - KinetiC-NC control system with wireless remote control, emergency stop - Control laptop (ASUS) included - CAM software VCarve Pro - Operating manuals and wiring diagrams Without automatic tool changer. Notes: Cedpfx Ape Af Ifzo Dehd - Inspection possible by arrangement (not under power) - Disassembly and transport by the buyer, we will assist with the forklift during loading - Sale excludes any warranty - Invoice with VAT shown

Condition: used, mileage: 456,000 km, power: 250 kW (339.91 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2010, next inspection (TÜV): 09/2028, emission class: euro5, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Special equipment: For export or company use only! Audio navigation system RNS 850 (CD/DVD, hard drive storage, MP3, DAB, touchscreen color display), antenna diversity, digital radio reception (DAB), AUX-IN multimedia connection, roof rails, driving assistance package, front and rear parking sensors, proactive occupant protection system, driving dynamics package with adaptive roll stabilization, interior: Nappa leather, Climatronic 4-zone air conditioning, fuel tank: 100 liters, driver's side knee airbag, 9x20 (Metropolitan) light alloy wheels, Premium memory package, electrically foldable exterior mirrors, exterior mirrors with puddle lights, exterior mirrors with automatic anti-glare function, left, steering column (steering wheel) electrically adjustable, height/longitudinal adjustment, MEDIA-IN multimedia connection with iPod adapter cable, electric panoramic sunroof, metallic paint, smoker's package, front and rear side airbags with head airbag unit, rear seat belts with belt tensioners, remote control for garage door opener (integrated), front seats with climate control, DYNAUDIO sound system, 12-channel amplifier, sports interior package, front and rear door sill trims (stainless steel), rear windows tinted (65%), interior: brushed aluminum trim, stainless steel/aluminum pedals, leather/aluminum gear/selector knob, 230V socket, analog and digital TV reception (tuner), digital radio reception (DAB), front and rear parking sensors, premium mobile phone/cell phone preparation with Bluetooth interface, front seat heating, auxiliary heating (parking heater), remote control for parking/auxiliary heater, fuel tank: 100 liters. Chods Aa Ei Sepfx Ap Djd Additional equipment: Airbag driver/passenger side, passenger airbag can be deactivated, antenna diversity, anti-slip regulation (ASR), equipment package: light + sight, electrically foldable exterior mirrors, exterior mirrors with puddle lights, exterior mirrors with automatic anti-glare function, left, automatic headlight activation (ALS), light assistant (Coming Home, Leaving Home), double sun visors, exterior mirror aspherical, left, exterior mirrors electrically adjustable and heated, both, automatic headlight range adjustment, chrome package (1), black radiator grille with chrome strips, chrome strips on side windows, chrome trim on front bumper air intake, chrome & style design package, chrome strips on side windows, chrome trim on front bumper air intake, loading edge protection (stainless steel), front and rear door sill trims (stainless steel), electronic differential lock (EDS), textile floor mats, front and rear footwell lighting, luggage compartment cover/roller blind, front cupholders, lockable glove compartment, illuminated and with cooling function, interior mirror with automatic anti-glare function, Isofix mounts for child seat in rear, body: 4-door, child safety lock in passenger compartment electrically operated, front lumbar supports, electrically adjustable, front and rear reading lights, engine 4.2 liters - 250 kW V8 TDI, premium multi-function display (color display), AUX-IN multimedia connection, rear fog light, electric parking brake, stainless steel/aluminum pedals, wheelbase 2904 mm, tire repair kit (Tire Mobility Set), rear seat backrests with remote release can be folded down, rear seat bench/backrest split, low emissions according to emission standard Euro 5, leather/aluminum gear/selector knob, front seat belts with belt tensioners, height adjustable, front seats electrically adjus

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Codomza Ilepfx Ap Dshd Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Two separate units are for sale. Both units were acquired in early 2020. Unit 1: - 4.0m suction slit channel AS 590 made of aluminum with neoprene lip seal - 1 piece of connection flange DN 315 - 1 piece of suction carriage Rollfix and flange in the center for hose DN 250 Price: €610 excl. VAT. Unit 2: - 10.0m suction slit channel AS 740 made of aluminum with neoprene lip seal - 1 piece of connection flange DN 355 - 1 piece of suction carriage Rollfix and flange in the center for hose DN 300 Cedpfxozuwcve Ap Dshd Price: €1120 excl. VAT.

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Chjds Agr I Djpfx Ap Dod Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter - Air blast through spindle center - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between businesses (B2B) are always made without warranty.

Condition: used, mileage: 171,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, Year of construction: 2004, TARGA: GS717AP TITLE: MITSUBISHI CANTER 3.0 HOOK LIFT, LEAF SPRUNG FRONT AND REAR REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 cc EMISSIONS CLASS: Euro 3 KILOMETRES: 171,770 GEARBOX: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short, low SEATS: 3 PAYLOAD: 1,300 kg - GVW (Tractor): 3,500 kg fully loaded - GVW (Tractor + Trailer): 7,000 kg fully loaded Cedpfx Asuznrvsp Dehd BODY TYPE: hook lift HOOK LIFT MODEL: PRISMAG 3 TON TELESCOPIC (extendable): no SWIVEL: no ROLLER: no ADR: no ACCESSORIES: - Hook height: 90/92 cm - Channel width: 88 cm - Body ref. 24-U-30 BODYWORK CAPACITY MAX: 3.15 m + 0.14 m OVERALL LENGTH: 4.60 m OVERALL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes INSPECTED: 10/04/2024 TYRES: 100% NEW PRICE: €24,500.00 + VAT – including body 24-U-30 Displayed prices do not include VAT. Please contact our sales team for an up-to-date quote and terms. For more information: Loris: 3484773001‬ URL: #hookliftspecialists AURORA HOOK LIFTS operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Experts in trucks, trailers, and hook lift equipment. With a stock of over 50 trucks and more than 150 bodies and containers, available for immediate delivery, with and without hook lift cranes. E.&O.E. (Errors and omissions excepted) Due to the high volume of listings and details provided, Aurora advises verifying the accuracy of the data with our sales team.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Csdpstvau Asfx Ap Dehd Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.