Used Channel for sale (970)

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Tedpfx Agexx Tmrs Djf Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: used, Year of construction: 2008, Technical details: bar material dia.: 15-65 mm bar length: 3200 mm Channel sizes: 15-65 mm weight of the machine ca.: 2,2 t dimensions of the machine ca.: 4,4 x 1,1 x 1,7 m Tjdpfxsxz Ey Ao Ag Dsf This TOP Automazioni X-Files 365 M bar loader magazine was rebuilt by TOP Automazioni in Italy in 2016 and has worked max. 10 hrs since then. It is in excellent condition and currently installed at a DMG Mori NLX 2000 SY. Fully automated bar loader magazine for machines with a maximum bar capacity of 65 mm with automatically changeable diameter for bars from 15 to 65 mm. No change of channels and pushers anymore, no spindle reduction tubes necessary. Loader is programmable in mm increments. *

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Tedpfxewag Ris Ag Dof Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Tsdpfx Asup T Uqjg Dsf Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Tjdpfxjxx Ti Ts Ag Dsf Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, KRÜSS Type: FP8400 Remarks: (Year of manufacture 2019) The device has never been put into operation, is in mint condition and is in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analysis techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K) and lithium (Li) and alkaline earth metals such as calcium (Ca). The measurement for these elements is carried out simultaneously in one step. Through consistent modernization of the flame photometers and a special focus on safety-related concepts, completely new fields of application are opening up for many cost-sensitive customer groups - from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of AES's main strengths, and the technology of the FP8000 series also scores with high determination accuracy. Measuring food samples Quality assessment of high-purity glasses and vials for pharmaceutical packaging Concrete classification Analysis of infusion solutions. Flame photometer laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: Todovy Uytepfx Ag Dof 0.001 mg/l for all elements Accuracy: +/-1% with appropriate quality of the standards Precision:

Condition: excellent (used), Here we offer you a RMS vibration vibration exciter SW 3009 with side channel blower SKP49033-01/06Type: SW 3009Condition: used / usedScope of supply: (See picture)(Changes and errors in the technical data, specifications are reserved!)We are happy to answer further questions for you on the phone. Tsdpfx Ajd Talgjg Djf

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent data logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components and and systems for autonomous driving. These complex, networked technologies provide ever larger amounts of data, which makes and more complex during the development phase. In order to shorten the test drives, reduce their number and still meet the test requirements of all departments, the advantages of an intelligent and powerful data logger data logger such as the GL5300 series come into play. The GL5300 series covers the time-synchronous recording of LIN/ CAN & CAN FD bus systems via FlexRay networks through to Ether- networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 for a further 20 CAN FD channels with SIC transceiver and up to 3 GL5450 for synchronous recording of up to 60 100-base T1 (30 taps) and up to 18 1000-base T1 routes (9 taps). Residual bus simulation Classifier Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FLexray, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive triger and filter conditions) Data transmission via LAN/WLAN, USB and mobile radio Operation via menu control Technical data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 Bit 4 Operating voltage +7 V ... +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in half-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C... +70 °C Housing: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Trim strip: ABS Tsdpfx Ajt R R Uweg Dsf Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: Tedpsva Hi Hefx Ag Def energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Tjdpfx Agewvr H Uj Dsf Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: good (used), Heinzinger Type: ERS 600-500/160 Description: Battery module tester Highly dynamic test bench energy system Bidirectional DC power supply with active energy recovery, liquid-cooled Tjdpoq Nzwhsfx Ag Dof Voltage [max]: 20 - 600 V adjustable Current per channel [max]: ± 500 A adjustable System power [max]: ± 250,000 W Mains connection (3/N/PE): 3x400V ±10% 47 ... 63Hz Software: Battery simulation software for load change-optimized control Dimensions (W/H/D): 2400/2330/800 mm Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: Tjdpfxovba Raj Ag Def 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply unit, DC, 1 channel, 2 U, 10V/240A, 2,400W, RS232, RS485 in a 19 inch housing Technical data: Manufacturer TDK-LAMBDA Power supply unit type Programmable laboratory power supply unit Used display type LED x2 Tedpfsuv E Aujx Ag Dsf Number of channels 1 Output voltage 0...10V DC Output current 0...240A Max. Power 2,4kW Rack mounting 19" Output voltage solution 1.2mV Output current solution 28.8mA Ripple and noise of the voltage (regulated) ≤8Vrms, ≤60Vpp Input connection type terminal block Manufacturer series GEN Operating temperature 0...50°C Dimensions (width x height x depth) 423x43.6x432.8mm Display parameters 4 digits Software LabVIEW Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: Tjdpfx Aowwrxajg Dof - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Tjdpfxjw Elmyo Ag Dsf Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C Tjdpfeu U Ixmox Ag Def The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) Todotqfbbspfx Ag Def (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Tjdpfxovitmde Ag Djf Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Todpfx Agevb E Uqo Dof Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ Todpfxovb Hanj Ag Def External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values Tjdpfx Asvcyawog Djf - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) Tsdpfevaxq Nex Ag Djf External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Tedpfx Aoru Dzusg Dof Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. Tsdpfx Asihb Amog Dsf The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: used, Chroma Type: ATE 17011 Dimensions: W x D x H 600 x 800 x 1760 mm Regenerative Cell Tester (5V/100A x 12 channels) Power supply: 400V/50 Hz 24 KVA Data Logger (64 channels) 8-Port Sensor Card Module 17212R-5-100 Max 5V / 100A Max channels: 12 (fixed) Parallel operation: 200A, 300A, 400A, 600A, 1200A V Adjustable from 0 mV to 5000 mV * 1, resolution 1 mV Todpfx Aewwrn Uog Dof A Adjustable from 0.01 A to 100.00 A, resolution 0.01 A Connection: 400V/50Hz, 5 wires 24 kVA Weight: 250 kg Condition: used Scope of supply: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.