Used Chamfer For Palets for sale (367)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min Dwodpfxjxuqufe Af Ijd MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: excellent (used), Four-side planer Cattelan Macchine BASIC 350 Max planing width: 350 mm Max planing height: 250 mm Minimum workpiece size: 40x20 mm Minimum length of infeed material: 700 mm Dwedpjxpfhijfx Af Ied Number of spindles: 4 Spindle configuration: Bottom – 7.5 kW Top – 11 kW Right – 11 kW Left – 11 kW Chamfering units: 2 x 1.5 kW Spindle diameter: 50 mm Feed speed adjustable by frequency inverter: 0–30 m/min Outfeed table with drive and side discharge, length 4700 mm

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED Dsdpfx Afexc Axrs Ijwd

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Dwodpoxlz Nzofx Af Ied Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Dsdpjxldr Ejfx Af Iowd

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm Dwsdpfx Aewkf Ihof Isd - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: excellent (used), Chamfering machine for HSS saws Pedrielli model PGS Dwedpfxsul Tylj Af Iod

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° Dwsdswazn Aspfx Af Iod -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN-TOP HOOKABLE CONTAINER FOR AGGREGATE WITH A SQUARE TANK WITHOUT CHAMFERING, REAR OPENING WITH DOOR AND TILTING WITH 200 MM BEAMS AND SUPPORTED FLOOR, REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT, 55 MM HOOK REF: 24-N-35 TYPE: for aggregates C NEW: yes LID: no OPENING: rear door and tilt OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.00 m INTERNAL / EXTERNAL WIDTH OF THE BODY: 2.35 m / 2.55 m INTERNAL / EXTERNAL FRONT SIDE: 1.50 m / 1.70 m INTERIOR / EXTERIOR REAR TAILGATE: 1.00 m / 1.20 m INTERIOR / EXTERIOR SIDE TAILGATE: 0.80 m / 1.00 m MC: 12 WEIGHT: 1860 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: green ral 6029Errors and/or omissions excepted The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specialized in trucks, trailers and hook lift equipment. Dwsdpsvucmwefx Af Ijd With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Djdpfew Tfw Hjx Af Iewd Availability: short notice Storage location: Flörsheim

Condition: new, Special offer price for in-stock items! Only while supplies last! Price net ex-works, freight prepaid. The machine does not include a base frame. BF3 Deluxe base frame is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swivel range: -90° to +90° Distance spindle to table: 60 - 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor power input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Dsdpfx Afedh Hbcj Ijwd Weight approx.: 287 kg * without base frame Features: - Easy and quick speed changes using the gear selector switch - Versatile applications such as drilling, milling, threading, etc. - Extremely smooth operation thanks to ground gears running in an oil bath - Forward and reverse rotation for threading - Spindle adjustment via handle, fine adjustment via handwheel - Dovetail guide for the x-, y-, and z-axes, adjustable via V-shaped guides - Milling head pivots on both sides for angle drilling, milling chamfers, etc. - Large, solid cross table with precise surface finish - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Keyless drill chuck 3-16 mm / B 16 Drill chuck arbor MK 4 / B 16 M 16 drawbar spindle MK 4/3 reduction sleeve MK 4/27 mm combination milling arbor Height-adjustable protective cover Thread cutting device LED machine light Digital spindle stroke indicator Lamellar protective cover Longitudinal measuring scale Operating tool

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade Dwedpjxfw A Refx Af Ied This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) Dodpjw T Sl Dofx Af Iowd - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: excellent (used), Equipment and Technical Specifications: → Equipped with components from renowned international brands → Year of manufacture: 2020 → Very low wear – used only a few dozen times → Number of machining axes: 4 → Working area: 4000 × 2000 × 400 mm → Spindle: high-performance HSD (Italy), 9 kW, 24,000 rpm, air-cooled → Spindle rotation on Z-axis: 180° → Tool clamping system: ISO 30 standard → Sectional vacuum table powered by two independent pumps → Dedicated vacuum zones for clamping 3D / irregularly shaped workpieces → Tool magazine: 6 positions, automatic tool change → Drive system: Leadshine 850 W servomotors Dwsdpfx Afjmrq Ape Isd → Rack and pinion: hardened, helical, high durability (HIWIN) → Control components: Schneider (France), Delta inverter, Omron relays and sensors (Japan) → Maximum milling speed: ≥ 25,000 mm/min → Supported file format: G Code (.nc) The ideal machine for industrial applications: wood and furniture: -> three-dimensional plate milling; -> whole furniture to order; -> wardrobe door; -> glass door; -> shutters; -> cabinets; -> internal door; -> wardrobe door; -> craft wooden door; -> sliding door; -> office furniture; -> display cases; -> windows; -> other household products such as carving, cutting, punching, grooving, wiping and chamfering. It can also be used to cut and carve MDF, PVC, ABS. Advertisement: -> production of advertising signs and logos; -> acrylic cutting and production of advertising materials from various materials. Mold production: -> metal molds of copper, aluminum, iron, etc., And also non-metal molds for plastic plates, planks, etc. Other industries: -> bas-reliefs that are widely used in crafts ​

Condition: used, empty load weight: 9,328 kg, maximum load weight: 25,672 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/55 R22,5, Year of construction: 2017, Equipment: ABS, Tara: 9328kg, Peso bruto admissível: 35000kg, Certidão DIN EN 12642 (código XL), Espaço de carga (C A A): 13.410 mm x 2.490 mm x 2.700 mmTamanho do pneu: 385/55 R22.5, Volume espaço de carga: 90 m³, 1° eixo: , 2° eixo: , 3° eixo: , Suspensão ar, Protecção contra o encaixe, Eixo elevador, Porta paletes, Sistema de frenagem electrónico EBS, Suporte para extintor de incêndio, Suporte para roda sobressalente, Chassis aparafusado, Registrador de temperatura, Ficha de ligação 1x15 e 2x7 pinos, Anti-spray, Sistema de telemática, Dwedsxmlbwjpfx Af Ied

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Dsdpfx Aow I Sk Njf Ijwd Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Condition: used, Year of construction: 1980, pressure 0160 t chamfer lenght 2500 mm distance between columns 2000 mm column arm 315 mm stroke 190 mm table surface area 2500 x 400 mm return speed 100 mm/sec feed up 100 mm/sec feed down 50 mm/sec working feed 6 mm/sec table height over floor 850 mm ram surface 2500 x 400 mm flute distance 500 T-slots 6 x 18mm power capacity 18,5 kW oil volume 500 l Dwjdpfxelki Hqe Af Ijd total power requirement 22 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,20 x 2,40 x 2,60 m Machine was modernized conform to German safety regulations in 1993.

Condition: ready for operation (used), Year of construction: 1999, SCM Edge Banding Machine OLIMPIC S 220 Dwsdpfjr A Eumjx Af Iod - Manually adjustable infeed fence - Jointing unit - End trimming unit - Flush trimming unit - Chamfer trimming unit - Automatic feed - Corner copying unit with 4 motors - Radius scraper knives - Flat scraper knife - Buffing unit - Hot air blower - Machine length: 7.50 m

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps Djdow Itmrjpfx Af Iswd with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Dwodpfow Tprzjx Af Iod Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: used, empty load weight: 9,368 kg, maximum load weight: 25,632 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/55 R22,5, Year of construction: 2018, Equipment: ABS, Tara: 9368kg, Peso bruto admissível: 35000kg, Certidão DIN EN 12642 (código XL), Espaço de carga (C A A): 13.410 mm x 2.490 mm x 2.700 mmTamanho do pneu: 385/55 R22.5, Volume espaço de carga: 90 m³, 1° eixo: , 2° eixo: , 3° eixo: , Suspensão ar, Protecção contra o encaixe, Eixo elevador, Porta paletes, Sistema de frenagem electrónico EBS, Suporte para extintor de incêndio, Caixa de ferramentas, Suporte para roda sobressalente, Ficha de ligação 1x15 e 2x7 pinos, Anti-spray, Rodas de liga leve, Controle da pressão dos pneus, Dwodpfxexiy Rxo Af Isd

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Dwodpfxew Itmle Af Ijd Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: new, maximum load weight: 37,710 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and shortly available vehicles, on our website. Excerpts from the equipment list. Full equipment details are available upon request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor approx. 30 mm thick Loading Platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Including 3-piece removable galvanized covers over the wheel recesses (W = approx. 670 mm - max. point load 5 t/each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for hooking in tie-down straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – brand of our choice Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system according to EU regulations Dwedpfxjw Tpq Rj Af Isd - 24 Volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, and 15-pin sockets in accordance with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Top-quality and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Accessories Included: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Spare wheel bracket in front of the front wall - On the galvanized front connection strip, yellow-red air couplings - 4 wheel chocks with holder on the front wall - Mounting for aluminum loading ramps at the rear of the gooseneck - Galvanized folding supports under the rear slope of the loading platform - Bracket for warning beacon at the rear of the trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - On the gooseneck and rear panel left and right, holder for warning signs each including socket - 1 hardwood bumper on the rear wall from gooseneck to loading platform - Galvanized holder for extension planks left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side and rear boards, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stanchions are removable (length of the body approx. 2,560 mm) - A tool

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points Dodpfxsw Itl Ue Af Ijwd - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations Dwjdpfx Afsw Tpq Ds Isd - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck