Used Celtic 12 for sale (48,243)

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, drive type: Diesel, Sideloader Mast type: Duplex Condition: Ready for use and fully functional Pgjdpfou Hulyex Ag Dew Technical condition: good

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm Pgodpfx Agovtp Uxe Dew

Condition: used, Year of construction: 2008, operating hours: 10,407 h, load capacity: 4,000 kg, lifting height: 4,500 mm, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Heating, full cab, Psdpfot S I Hgex Ag Dsgw

Year of construction: 2012, condition: new, machine/vehicle number: 201403250027, On sell high pressure two stage rotary screw drill compressor - Sullair 20/12. The Screws are suitable with Sandvik Drilling Rigs. We have a few pcs of them. Brand new units. Specs: Model: 20/12 Series 1500 Pgedpfx Ajilqphjg Dow Capacity (cfm): 1500 RPM: 2100 Rated Pressure (psig): 350 Approx Weight (kg): 1066 Dimensions : L x W x H 47" x 34.8" x 42" (120x91x106cm) Considering that's the more popular in the USA, It can be delivered to Chicago on our cost. If you're interested, feel free to contact me.

Condition: used, Year of construction: 2011, Preheating: 4 zones at the bottom • Heating Section: 1,650 mm • Active Cooling Section: 800 mm (2-stage from above) • Chain Pin Transport System: 5 mm pin length with center support • Transport Speed: 0.2 - 2.0 m/min (Realistic for BF products: 0.5 - 0.6 m/min) • Working Width: 50 - 500 mm • Electronic Control: For width adjustment and center support • Clearance Height: +35 mm / 25 mm Podpfev Sy Ruox Ag Degw • Inlet & Outlet Length: 700 mm each • Condensate Management / Process Gas Cleaning in cooling zone • Automatic Chain Lubrication • ERSAsoft and EPOS Basic Module • Inline Compatible • SMEMA Compliant • Transport Height: 940 - 965 mm Available from end of Q2 2025. Ask for additional information!

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: E21Z12453, M-10ID/12 with R-30iB PLUS A remote cabinet .quite new.not used in serial Podew Ifkvjpfx Ag Degw

Condition: new, Year of construction: 2025, MODEL : HF500 6” (12”) NAME: PANT CRIMPING PRESS- HEAVY DUTY Power 500 Ton MAX CRINPING RANE: 310MM OPENING TRAVEL: + 115 MMM OPENING WITHOUT THIS : 360 MM 90° ELBOWS 3” CLOSING SPEED: 18MM/SEC PRESSING SPEED: 1.4MM/SEC OPENING SPEED: 20MM/SEC NOISE LEVEL: 62 DBA DIVER: 5.5 KW 3 VAC SIMENE'S TOUCH SCREEN CONTROL PROPORTINAL PRESSURE POSOTONE CONTROL Pgjdpjwbtaaefx Ag Dew FIYAT: €64,000 DAP DELIVERY ON STOCK

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: chip conveyor, Quaser 154E/12 Year : 2005 Travels : X - 760mm Y - 530mm Z - 560mm Table size : 900X500mm Max loading : 500kg Pgodpevx Ezfsfx Ag Djw Control : FANUC Oi-MC Spindel type : BT40 Spindel speed : 12000RPM

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 16,878 h, load capacity: 4,000 kg, lifting height: 5,700 mm, mast type: triplex, drive type: Treibgas, Sideloader Mast type: Triplex Pgjdowq Twwepfx Ag Djw Technical condition: good

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Pjdpfx Aowuz S Dog Dsgw Lateral horizontal groups: yes

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: E21Z10392, overall weight: 120 kg, M-10ID/12 with R-30iB PLUS A remote cabinet.quite new .not used in serial Pedpfew Iffasx Ag Dsgw

Condition: used, Year of construction: 2004, functionality: fully functional, air demand: 3,400 m³/h, DISA shot blast machine Model : SPH 2-5.5/12 Pgedpfx Agjwpquqj Djw Year : 2004 Max.loading limit of hook spindle : 300kg Height of hook spindle up to floor : 2018mm Max.⌀ of workpiece : 550mm Max. length of workpiece : 1200mm Number of blast chambers : 2 Air consumption of dust collector : 3400m³/h Blast wheel ⌀ : 342mm ( 13.5´´) Power : 2x7.5KW Installed power (without dust collector) : 25KW Control : SIEMENS Weight : 4600 kg

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 8,935 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Sideloader Pjdpjwq Tvmefx Ag Djgw Mast type: Standard Technical condition: good

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: E21Z10392, M-10ID/12 with R-30iB PLUS A remote cabinet . quite new. not used in serial. Pgodpfxew Ifgdo Ag Dew

Condition: used, Year of construction: 2016, operating hours: 8,788 h, load capacity: 5,000 kg, lifting height: 5,100 mm, free lift: 1,670 mm, mast type: triplex, construction height: 2,550 mm, drive type: Treibgas, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Pjdpfx Aounc I Rog Dsgw Condition: Ready for use and fully functional Technical condition: good Fork positioner, heating, full cab,

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: E21Z12453, overall weight: 120 kg, M-10ID/12 with R-30iB PLUS A remote cabinet. Quite new. Not used in serial. Podpfxew Id Tce Ag Dogw

Condition: used, Year of construction: 2016, operating hours: 9,686 h, load capacity: 5,000 kg, lifting height: 5,100 mm, free lift: 1,670 mm, mast type: triplex, construction height: 2,550 mm, drive type: Treibgas, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, Pgedpfx Aounc Rfeg Dsw heating, full cab,

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: E21Z11607, overall weight: 120 kg, M-10ID/12 with R-30iB PLUS A remote cabinet Pgedpfx Agjw Ifade Dew

Condition: used, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, mast type: simplex, construction height: 3,100 mm, drive type: Treibgas, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Psdpjuf Huhofx Ag Degw Fork positioner, heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 15,971 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,400 mm, drive type: Elektro, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Heating, full cab, Pjdpst S I Haefx Ag Djgw

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 18,985 h, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,320 mm, drive type: Diesel, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Description: Pantograph Pgedpfx Aeu T T A Isg Dow Heating, full cabin,

Condition: used, functionality: not functional, Year of construction: 2008, operating hours: 10,625 h, load capacity: 4,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Sideloading forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Psdpfxow Akn Rs Ag Dsgw Mast type: Standard Condition: Not operational Technical condition: For spare parts Description: Damaged engine

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S.1003825.001, faceplate diameter: 800 mm, workpiece length (max.): 800 mm, workpiece width (max.): 720 mm, TECHNICAL DETAILS Faceplate diameter: 800 mm Clamping diameter: 800 mm Max. workpiece dimensions: 800 x 720 mm Tool interface: Capto C6 Tool magazine positions: 2 x 80 Pjdpfxexvrhve Ag Dsgw MACHINE DETAILS Total power requirement: 110 kW Dimensions & Weight Approximate machine weight: 37,000 kg / total 52,000 kg Transport dimensions (machine): 5.07 x 2.98 x 3.90 m EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: M212/0062, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, In recent years, investments exceeding €25,000 have been made in maintenance and repairs. Occasionally, a system error occurs (sporadically, e.g., after 2–5 days of operation); after powering the machine off and on, it is fully operational again. TECHNICAL DETAILS Max. bar diameter: 12 mm Max. machining length: 200 mm Axes: 7 linear axes + C-axes for main and sub-spindle Main spindle Spindle bore max.: approx. 14 mm Motor power: approx. 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C-axis, full-C (0.001°) Front machining max. drilling diameter: 6 mm Max. thread: M6 Sub-spindle Clamping diameter max.: 12 mm Part length, rear side: 125 mm Max. drilling diameter: 5 mm Max. thread: M5 Speed range: 250 – 6,000 rpm Gang tool holder Max. drilling diameter: 5 mm Max. thread: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 5 mm Max. thread: M5 Max. speed: 200 – 6,500 rpm Back working tools Max. drilling diameter: 5 mm Max. thread: M5 Speed: up to 8,000 rpm Tools Tool stations: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Turning tool shank: 10 × 10 mm Drill bush diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: approx. 8–16 m/min Podpfx Agsxxlw Nj Dsgw MACHINE DETAILS Control: Mitsubishi Dimensions & weight Footprint L × W × H: approx. 2.5 m × 1.25 m × 1.7 m Weight: approx. 2,500 kg Power consumption (rated): approx. 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1212/0058, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 21, TECHNICAL DETAILS Maximum bar diameter: 12 mm Maximum machining length: 200 mm Axes: 7 linear axes + C axes for main and sub-spindle Main Spindle Spindle bore: 14 mm Motor power: 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C axis, full-C (0.001°) Front machining maximum drilling diameter: 6 mm Maximum thread: M6 Sub-Spindle Maximum clamping diameter: 12 mm Part length (back side): 125 mm Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed range: 250 – 6,000 rpm Gang Tool Holder Maximum drilling diameter: 5 mm Maximum thread: M4 Maximum speed: 200 – 8,000 rpm Turret Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed: 200 – 6,500 rpm Maximum thread: M5 Maximum speed: 8,000 rpm Tool Stations Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Tool Holders Pjdpfxoxxlvrs Ag Dsgw Turning tool: 10 × 10 mm Drill sleeves: diameter 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.5 m × 1.25 m × 1.7 m Weight: 2,500 kg Power Consumption (Rated): 6 kVA EQUIPMENT Chip conveyor