2K ultrasonic cleaning system

Rational USC-2K-US-SP-OS-Fil-WB120

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm Podowzmpzjpfx Ac Aerb min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 Prodpfjzdf Hvox Ac Aeb With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Psdpjzqt Umjfx Ac Aorb Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2012, functionality: fully functional, The machine is in good condition and is equipped with a loader and a disc changer. Pedpfx Acjx Swyfs Aorb

Condition: like new (used), Year of construction: 2026, functionality: fully functional, We offer you: CNC turning and milling center with robotic automation Manufacturer: DMG MORI Type: CLX 450 TC Year of construction: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool interface: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Internal clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct linear scales in the X and Y axes - Double-circuit filter - Counter spindle ISM 65, A2-8, C-axis and hydraulic spindle brake - Hinged belt chip conveyor, incl. coolant tank - Chuck flushing device on the outside for the main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Screen cleaning for the safety shield - Electronic handwheel (if available) - Alternating speed - Signal light, 4-color - Automatic work area door, electric - Electrical interface Robo2Go - Workpiece measuring probe, manufacturer Renishaw RMP40 (if available) - Tool measuring device, manufacturer Renishaw RP1 (if available) - Function for drill breakage detection for Renishaw RP1 - Linear scale for Z1-axis Pjdpfjz A Ay Tsx Ac Ajrb - Differential pressure monitoring 2.0 on the main and counter spindle - Tailstock function for the counter spindle, incl. foot switch - Coolant system 8/40 bar, consisting of: - Coolant tank 600 l - Pump pressure variable 8 – 40 bar - Belt filter system - Lifting pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with dialogue-guided programming - Technology cycle for parting off the workpiece - 2x 3-jaw chuck, manufacturer Schunk ROTA THW3 265-81 - Loading and unloading system Robo2Go, consisting of: - Module 35 kg - Drawer storage incl. additional drawer - Accessories on request Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 435 h, total height: 1,065 mm, total width: 645 mm, overall weight: 114 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in • Layer Thickness 110 microns 0.004 in • Build Speed 10 mm per hour 0.39 in per hour • Laser Type Ytterbium Fiber • Laser Spot Size 200 microns 0.0079 in • Material Refresh Rate 30 to 50 percent • Hopper Capacity 8.5 kg PA12 nylon 18.7 lb Pedoy Sy Nvopfx Ac Aerb • Dimensions 685 x 645 x 1065 mm • Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in • Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in • Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand • Weight 114 kg • Startup Time 60 minutes • Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity • Internal Temperature 200 degrees Celsius 392 Fahrenheit • Temperature Control Quartz tube heating elements PTC cartridges • Air Handling pressure controlled two stage filtration HEPA and carbon • Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A • Galvanometers Formlabs custom • Laser Wavelength 1065 nm • Laser Power maximum 10 watts • Beam Divergence 4.01 mrad • Laser Class Class 1 • Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0 • Touchscreen 10.1 inch 1280 x 800 • Control Brand Formlabs • The display is damaged however this does not affect the function Fuse Sift OPTIONAL: Fuse Sift price on request • Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8 • Fuse Sift Weight 93 kg without build chamber or powder 205 lb • Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in • Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb • Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in • Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb • Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb • Air Filtration Technology replaceable HEPA filter • Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity • Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system • Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit • Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A • Vacuum Requirements auxiliary vacuum with static dissipative grounded components • Sound Emission maximum 76.5 dB

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface Pedpfx Acsy E I Hie Asrb • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), For sale: OMIS 5 TON bridge crane, ideal for industrial use in a warehouse or factory building. 🔧 Main features: Capacity: 5 tons (5000 kg) Type: double-girder overhead crane Brand: OMIS (Italy) Span (rail distance): 20,000 mm (20 m) Hook travel: 6.6 m Robust box girder structure ⚙️ Performance: Pjdpfx Aey Aymisc Asrb Lifting speed: 4 m/min Bridge travel speed: 30 m/min (fast) – 7.5 m/min (reduced) Trolley travel speed: 16 m/min Power supply: 380V three-phase – 50 Hz Pendant push button controls 🏭 Usage: Always operated inside a covered industrial building Ideal for workshops, steel fabricators, and heavy-load handling

Year of construction: 2016, condition: ready for operation (used), Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000mm/3000mm, total weight: approx. 13000kg, inspection possible by arrangement. Pjdpfx Ajylbr Dsc Asrb

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Psdpsxuzyfjfx Ac Ajrb Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately