High pressure parts cleaner

Glogar HP30

Year of construction: 2025, condition: as good as new (ex-display), HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Gcsdpfx Aaohl If Teysa Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Gcjdpjra Nqhefx Aaysa Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Gsdohl Ifzjpfx Aayeca Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm Gsdpfxepbbc Hs Aayeca - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Gcodpfx Aohl H Uusaysa Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts Gedpfxsfz Nake Aayeca The columns are made of AISI316L steel

Year of construction: 2019, condition: new, Booth KPZ-4P • Booth Type Closed drive-thru • Worksize dimensions 3500 width x 1800 height x 1000 depth Gcjdpfx Aebxmfneayea • Overall dimensions 3300width x 2300 height x 1800 depth • Power supply Electric • Nominal power 0,69kW x4 • Voltage 380V • Frequency 50-60Hz • Filters 100% Polyester • Filters count 4 • Filters hang type Bagnet type, easy on/off • Filter area 30m2 • Filter cleaning system Pneumatic - Jet Venturi • Ventilator type Aluminium ray rotor . • Air consumption 20,400m3/h • Loudness 74dBa • Doors Double, both side • Inside drive diameter 800mm

Condition: new, functionality: fully functional, working width: 1,300 mm, warranty duration: 12 months, workpiece width (max.): 1,300 mm, RWT deburring machine possible configuration Four-station machine: 1. deburring with contact roller grinding belt 2. cup brush for oxide layer or slag removal 3. cup brush for edge rounding 3. finish sanding via contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) - removes burrs that protrude above the surface of the material, removes scale and corrosion from the surface Planetary disk brush unit (D) - rounds the edges, creates radii and removes the oxide layer on the sides after laser cutting. Rotary unit (A) with finned brushes - deburring and edge rounding without foil removal, surface uniformity. Brush unit made of abrasive fleece (B) - pre-cleans and polishes surface material These deburring machines are used for the following tasks: deburring parts after laser cutting - deburring edges, removing oxide and finishing the surface Deburring of parts after plasma cutting - slag removal, rust removal, removal of material overflows, edge rounding and surface finishing. Deburring of parts after punching - removal of sharp edges, edge rounding and final surface finishing. Deburring of parts after water jet cutting - deburring and rounding of edges, removal of marks after water jet cutting and final surface treatment. Deburring of stainless steel parts covered with foil - deburring and edge rounding without foil removal. Gsdpfx Aajudal Deysca Main advantages of the machine: Modular system - we design the machine exactly to your requirements High-quality and uniform deburring of all edges of the product Processing of very small workpieces with the magnetic or vacuum table Very easy operation of the machine thanks to the Schneider Electric touchscreen Grinding, deburring and finishing with one machine Very quick change of tools and rigid machine frame In view of the large number of possible machine configurations, we recommend a personal consultation and free grinding samples at our premises, which we use to assess our customers' requirements and then propose the most suitable machine configuration for the production in question.

Condition: new, Year of construction: 2025, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Gedpfx Asg Ev T Eoayoca Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches Godpfsgvaazex Aayoca - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.