Used Can Baler for sale (296)

Condition: used, Year of construction: 2020, We offer, directly and on behalf of the owner: Cardboard baler, used Manufacturer: Unibaler (Denmark) Model: UX 4 Year of manufacture: 2020 Pressing force: 4 t Feed opening: 710 x 446 mm Feed height: 746 mm Chamber height: 1082 mm Stroke length: 550 mm Bale size: 710 x 560 x 630 mm Bale weight – Cardboard: 30 - 60 kg Bale weight – Plastic: 40 - 60 kg Strapping tape width: 9 mm Power supply: 230V, NO three-phase power required! Dimensions: 853 x 734 x 1986 mm Godpfexg I Awsx Aacekc Weight: 515 kg The baler comes from a reputable, well-maintained operation and is only being sold due to insufficient capacity.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, empty load weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Main press force 1000 kN Gksdpfx Aaoxb Dvvecjc Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2021, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20857 Specifications: Design: Mobile, mounted on a trailer easy transport and flexible operation Rotor: Diameter: 700 mm Length: 2,800 mm Variable speed: 0%u2013200 RPM Automatic rotation direction and cleaning system 140 flat knives (60x60x30 mm), replaceable and reversible 5 static counter knives, reversible F ring system: Automatic, hydraulic feeder Cutting technology: Progressive cutting for smooth and efficient material processing Engine and operation: Engine type: Diesel Brand: SCANIA DC 13 EURO 6 Power: 407 kW Emission system: Separate AdBlue tank Gsdpfxjwvzryo Aacokc Control panel: Touch screen %u2013 user-friendly and in accordance with EEC standards Remote control included Efficient material handling: Hydraulic raising/lowering of the feed hopper Rubber track with hydraulic outlet Overbelt magnet for efficient metal separation Weight: Total weight approx. 32,000 kg   Description: MOBILE INDUSTRIAL GRINDER %u2013 MAC-S 28%u201370 HYDRO MOBILE We offer a MAC-S 28%u201370 HYDRO MOBILE, specially designed for maximum performance and flexibility. Perfect for recycling, waste management or other coarse grinding. Can be delivered within a short time. Own weight: 32000 Model: MAC-S 28-70

Condition: used, Year of construction: 1997, functionality: fully functional, power: 110 kW (149.56 HP), empty load weight: 30,000 kg, Channel baler BAUER Gkjdpow Ip E Djfx Aacoc Model: Taurus Bale dimensions: 680x1100x variable Technical data as per attached PDF. Including belt control The baler is available immediately

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Gsdsvq Rtkspfx Aacekc Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: ready for operation (used), Year of construction: 2007, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2007 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Very good! Functionality thoroughly tested. FLITS Rental & Sales service: Each machine comes with a bundle of binding wire (120 wires). Need more binding wire bundles? Request a non-binding quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the fields of internal material handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a comprehensive range of machines suitable for various sectors. See our other listings for: waste compactors for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts in different configurations, suitable for diverse work environments. With FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you quickly have the right machine. Gksdpfx Aaexcuauscoc You are most welcome to visit and inspect the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we have ample time to inform you and showcase the appropriate machines. Do you have any questions or would you like to receive a non-binding quotation? Feel free to contact us: We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste handling

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Technical details: Gjdpfx Asunzn Njacskc Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Rated current: 2.6 AMP Year of construction: 2011 Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Gkjdpfx Aoxbgnhoacec Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2017, operating hours: 6,500 h, Field of application: Construction Serial number: W09306325H2D3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19454 Specifications: - 2017 model - Hours: Approx. 6500 - Weight: 25,000 kg - Central grease - Mobile - Magnetic tape - Comb extension - Follows with full comb with blades of approx. 90% - Includes 2 new original tapes Gkedpovyf Dvofx Aacec - Services are taken by owner - Ready for delivery Description: Opportunity to secure a Doppstadt DW3060 from 2017. The machine is used for wood and waste. It is sold with a full comb with blades and 2 new ribbons. 3 tooth holders are broken, but the owner has both holders and blades lying around. Ready for delivery. Hours: 6500 Own weight: 25000 Total Weight: 25000 Model: DW-3060

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Gedpfxsvaw T Ae Aacjkc

Condition: used, Year of construction: 2018, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2018 Gedpfsw T Rc Ijx Aacokc Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2018 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Processed materials: Paper, cardboard, film Please note: All technical data are based on manufacturer information. We assume no liability for the details provided or for any errors. Offer is subject to prior sale and can be withdrawn at any time. An inspection is possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. Gksdpsxbc U Dsfx Aacsc The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Vintage: 1996 Gkodsm Amk Nopfx Aacec 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760

Condition: good (used), Year of construction: 2011, functionality: fully functional, Compressive force 548 kN Gjdpfx Asttaytjacokc The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: excellent (used), Year of construction: 2006, Balemaster Gkodpfx Aaerdwlkscsc Year: 2006 Type: CMG 268 Waste compactor

Condition: excellent (used), Year of construction: 1994, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, The HSM AK 1200 automatic horizontal baler is equipped with an automatic binding system. The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Gkedpfx Aajxmgm Uocsc Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: used, Year of construction: 2003, functionality: fully functional, Baler Presto CC 13 V, year of manufacture 2003, incoming. Technical data: Manufacturer: Presto Model: CC 13 V Year of manufacture: 2003 Pressing force: 13 t Cycle time: 24 s Drive power: 4 kW Filling opening: 780 x 750 mm Filling volume: 0.39 m³ Binding: 3-fold, automatic Throughput capacity at bulk density of: 35 kg/m³ – 1.7 t 60 kg/m³ – 2.5 t Gksdpfx Aaew Tyxlecsc 100 kg/m³ – 3.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine weight: approx. 1900 kg Materials: Paper, cardboard, film Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment ex works, without guarantee or warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg Gsdpfxjttal As Aacekc

Condition: used, Year of construction: 2005, operating hours: 16,304 h, Baling Press HSM VK 4012, Year 2005 – Incoming (expected soon) Manufacturer: HSM Model: VK 4012 Year of manufacture: 2005 Operating hours: 16,304 Pressing force: 45 t Drive power: 15 kW Feed opening: 820 x 1250 mm (W x L) Capacity: 8.7 t/h at 50 kg/m³ Bale size: 900 x 720 x 600–1200 mm Bale weight: 250–400 kg Binding: triple, automatic Transport dimensions: approx. 7,200 x 2,300 x 2,400 mm (L x W x H) Weight: approx. 8,000 kg Materials: paper, cardboard, film Gkodpfx Asw Tilneacsc

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Gedpfx Asttav Neacjkc Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,334 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year 2009, Fully Workshop Overhauled Technical Data: Manufacturer: Europress Type: 6500 V5 H4 Gkjdpfxsw Rlf Eo Aacoc Year of manufacture: 2009 Operating hours: approx. 15,334 hrs Number of bales: 138,097 Main press force: 120 t Specific press force: 142 kg/cm² Feed opening dimensions: 1,650 x 1,100 mm Fill volume: 3 m³ Filling volume per press cycle: 1.58 m³ Bale dimensions: 730 x 1,100 mm Drive power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load: 83 kW Current consumption: 150 A Binding: 5-fold vertical, 4-fold horizontal, fully automatic Bale weights: 450-900 kg Hydraulic oil tank volume: 1,200 L PLC control: Siemens S7-200 Operator panel: Siemens touchscreen Press dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport dimensions (press only): 9,965 x 2,500 x 2,900 mm (L x W x H) Machine weight (press): approx. 28 t Overhaul Work Performed on the EP 6500 V5: - Completely de-rusted and repainted - Full renewal of the interior steel floor of the press - Overhaul of plunger (steel construction) - Complete overhaul of horizontal and vertical lance boxes - Full replacement of internal Hardox lining - All hydraulic hoses replaced - Both lifting cylinders renewed - Knives and counter-knives replaced - All hydraulic cylinders resealed and tested - All guide and sliding plastics renewed - Wire deflection pulleys replaced - Various cables and sensors replaced - Various electrical components (control cabinet) renewed - Complete check of electrical system/control - Full pressure test of hydraulic system Remarks: The machine has been overhauled, checked, and tested by us. You can find a video on our website or YouTube channel. Inspections, including powered operation, are possible at any time by appointment. On request, we are also happy to perform test runs with your material for a fee. For questions about the machine, you may also contact us by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer’s specifications. No liability is accepted for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspection possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Godpfsw Rlflsx Aacokc Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year: 2019 Drive power: 7.5 kW Pressing force: 50 t Cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Gsdpfow Rldnjx Aacjkc Suitable materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, polystyrene, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video can be found on our website or YouTube channel. Viewings, including live demonstrations, are possible by appointment at any time. On request, we can also carry out tests with your material for a handling fee. If you have any questions about the machine, please feel free to contact us by phone from Monday to Thursday between 8:00 and 14:00. On Fridays, we are available from 8:00 to 13:00. Please note: All technical specifications are based on information provided by the manufacturer. We do not accept liability for any errors or misstatements. All offers are subject to change, prior sale reserved, and can be withdrawn at any time. Viewings are possible by prior arrangement. Sale is ex-works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2020, very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S PET Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Gkedpfxjw Rlc De Aacoc Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good, as-new condition. The seals on the 2 cylinders for the retention clamps have been renewed. The machine was checked and tested at our site in 28816 Stuhr. The video can be found on our website or on our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct test runs with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on the manufacturer's information. We accept no liability for the information provided or for any potential errors. All offers are subject to change, prior sale reserved, and can be revoked at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: used, Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II with hopper, built in 1979 Technical data: Manufacturer: Paal Type: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, film Remarks: The machine is in working order. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our YouTube channel. Gkodpsv Nhw Dofx Aacsc Viewings, including under power, are possible at any time by arrangement. On request, we can also carry out tests with your material for a fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Fridays we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place from the location, without warranty or guarantee. Our payment terms are 100% advance payment.