Used Cable Slot Machine Superior K 74 for sale (90,301)

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Lsdpfow U Dwhsx Aduohp

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Lodpfx Aep I I U Djdujhp Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: used, Year of construction: 1987, machine/vehicle number: 69079, grinding length: 1,000 mm, grinding width: 550 mm, total height: 2,500 mm, total length: 4,650 mm, total width: 2,800 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table speed: 30,000 mm/min, grinding wheel width: 100 mm, overall weight: 6,100 kg, grinding spindle motor power: 11,000 W, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 180 m/min, rapid traverse Z-axis: 75 m/min, travel distance X-axis: 1,075 mm, travel distance Y-axis: 470 mm, Equipment: rotational speed infinitely variable, - Surface grinding machine, operational, still under power. - Bed made from Meehanite cast iron - HBA 3001 automatic wheel balancing, but has never been used, so functionality is unknown. - Automatic dressing device with compensation - Automatic infeed and cut-off - Electromagnetic chuck with adjustable holding force Lhodjxbrl Ejpfx Aduop - Coolant tank with 270 l capacity and paper band filtration system - Digital display on Z and Y axes - Hydraulic transverse clamping - Machine lamp - Machine sold as is, ex works - Loading will be invoiced based on actual effort - We cannot provide export documents; we can only supply the machine invoice for your exporter Accessories: - Magnetic chuck - 3 flanges - 3 grinding wheels - Balancing device

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm Lsdpfjv Dtmmjx Aduehp -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: good (used), mileage: 362,560 km, power: 294 kW (399.73 HP), first registration: 08/2017, fuel type: diesel, color: red, axle configuration: 6x2, tire size: 385/65 R22.5, fuel: diesel, wheelbase: 5,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, air conditioning, crane, cruise control, differential lock, soot filter, trailer coupling, = Additional Options and Accessories = - 2-DIN radio - Adaptive cruise control - Aluminum fuel tank - Leaf spring suspension - Differential lock - Differential lock - EBS (Electronic Braking System) - Electric windows - High beam headlights - Hazard warning lights - Speed limiter - Power steering - Air suspension - Air-suspended seats - Particulate filter - Reversing camera - Disc brakes - Sun visor - Lane departure warning system - Toolbox Lhsdpfxewzm Tas Aduop - PTO (Power Take-Off) - Central locking - Towing jaw = Notes = EURO 6, IVECO STRALIS 400 6X2 WITH HMF 1720 K3 CRANE & 24 TON H.T.S. CABLE SYSTEM 3X HYDRAULICALLY TELESCOPIC ROTATOR REMOTE CONTROL 2X HYDRAULIC OUTRIGGERS DISTRIBUTION CAB WITH SUN VISOR, AUTOMATIC TRANSMISSION, ENGINE BRAKE, AIR CONDITIONING, ADAPTIVE CRUISE CONTROL, LANE DEPARTURE WARNING, 2-DIN RADIO, REVERSING CAMERA, DIFFERENTIAL LOCK, RINGFEDER TRAILER COUPLING, 4X EXTRA HIGH-BEAM FLOODLIGHTS, HAZARD WARNING LIGHTS, STORAGE BOX, DUTCH REGISTRATION WITH TÜV VALID UNTIL 08-2025 VIDEO: = More Information = Technical Details Number of cylinders: 6 Engine displacement: 8,170 cc Driveline AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 9,000 kg; Steerable; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80 R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R22.5; Twin tires; Lift axle; Max. axle load: 8,000 kg; Tire tread left inner: 90%; Tire tread left outer: 90%; Tire tread right inner: 90%; Tire tread right outer: 90%; Suspension: Air suspension Dimensions Dimensions (L x W): 820 x 255 cm Weights Unladen weight: 12,470 kg Payload: 15,530 kg Gross vehicle weight: 28,000 kg Functional Crane: HMF 1720-K3, mounted behind the cab Condition Technical condition: good Visual condition: good Damage: none Identification License plate: 25-BJV-3 = Company Information = Gast Trucks Venlo B.V. | Up to 30 pictures and a video on request. Since 1998, we have specialized in buying, selling, importing, and exporting used commercial vehicles. Location: Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL). Transport and export documents / license plates available at extra cost to ports in the Netherlands, Belgium, or Germany. Reservation without deposit is not possible!

Condition: used, slot-milling length 300 mm groove width 34 mm flute depth mm cutting speed 6 m/min return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg dimensions of the machine ca. 590 x 1150 mm Ledpfx Aed Ih Uiedushp Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, center height in crank: 200 mm, center height: 200 mm, workpiece weight (max.): 100 kg, grinding length: 1,000 mm, workpiece weight between centers: 100 g, workpiece diameter between centers: 400 mm, On behalf of a customer, I am offering this machine, which is in nearly mint condition. It is currently still powered up. The machine is equipped with the following options: Glass linear scales in X and Z axes Electric door drive Integrated wheel change assistant Lodjw Ed D Ropfx Aduehp Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1-2-3 (prepared for HF internal grinding spindle) T1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning at the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided upon request.

Condition: used, Year of construction: 1999, 6 pockets Lhsdpfx Adswv D Iwoujp 2 swords Standing pile delivery SBPD mobile sword

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. Lhsdpepbv Tfofx Adujp . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable -Manufacturer: Leuze electronic, connection cable sensor cable Ovp -Type: KD M12A-4P-5m-PVC -Part No.: 50104544 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 200 x 30 mm Lhedpfx Adsir Nttsujp -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 2008, functionality: fully functional, Used SHINOHARA 74-4 Offset Press | Year 2008 | 4 Colors | B2 Manufacturer: SHINOHARA Model: 74-4 Year of Manufacturing: 2008 Configuration: 4 Colors Max Sheet Size: 520×740 mm (B2) Max Mechanical Speed: 13,000 sheets/hour Condition: Very Good, still in production (Can be inspected under power). Technical Features and Automation: ● Dampening: Alcohol Dampening System ● Cooling/Circulation: Baldwin System ● Inking Control: Remote Ink Key and Register Control Console ● Plate Change: Semi-Automatic Plate Loader ● Washing: Automatic Blanket and Ink Roller Wash-up Devices ● Drying: IR NIKOR Dryer Ljdpfx Adexm S Sisujhp ● Feeder: Ionizer at Feeder, Electronic & Mechanical Double Sheet Control ● Delivery: Non-stop delivery ● Substrate Thickness: 0.04 to 0.6 mm ● Pre-press Connectivity: CIP 3 Ready

Condition: used, Dowel hole drilling device: no Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Lsdpew H Ip Tefx Adujhp Machine length: 1280 mm Machine width: 960 mm Weight: 200 kg

Condition: good (used), Year of construction: 1994, Used Jago K 21 PN dowel drilling machine Year of manufacture 1994, Machine No. 1178 For drilling cabinets, frames, fittings, and line holes in the 32 system Technical specifications Number of spindles: 21 Center distance between drill heads: 32 mm Tool holder shank: 10 mm Max. workpiece size: 880 x 2500 mm Max. workpiece height: 100 mm Max. drilling depth: 83 mm Support table size: 940 x 410 mm Number of pressure cylinders: 2 2 side stops, approx. 1000 mm each Lodpfxswlgpce Aduohp 1 stop extension, approx. 1500 mm each Required air pressure: 6-8 bar

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 350 mm z-travel 140 mm table surface area 700 x 300 mm spindle taper ISO 40 spindle turning speed range 100 - 4000 U/min distance spindle center to column 395 mm distance spindle nose and table min. 170 -max. 550 mm Lodpfstv Idxex Aduehp control TNC 407 milling feeds 3 + 2000 mm/min rapid traverse 5000 mm/min spindle drive 5,5 kW total power requirement 9 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407,

Condition: good (used), Year of construction: 1996, folding machine GUK K 49/4 FN-TH, feeder, 4 pockets, 1 sword, delivery, counter, machine number 36560, year of manufacture 1996, in a good condition, available immediately Lhodpfxeh I Drgj Aduep

Condition: used, PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 Lodorb E Ewspfx Adushp -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: ready for operation (used), Year of construction: 1989, grinding length: 1,500 mm, grinding width: 900 mm, grinding wheel diameter: 500 mm, table length: 1,500 mm, table width: 740 mm, grinding wheel width: 100 mm, CNC Surface Grinding Machine Machine type: Elb Schliff SWDE 012 NPC-K Year of manufacture: 1989 TECHNICAL DATA: Max. grinding length: 1,500 mm Max. grinding width: 900 mm Max. working height with new grinding wheel: 800 mm Max. working height with worn grinding wheel: 880 mm Max. workpiece weight: 1,000 kg static Lhodpfx Adswzlkqeuop Max. table load: 1,500 kg/m dynamic Grinding wheel diameter: 500 mm Grinding wheel width: 100 mm Table size: 1,500 x 740 mm Features: Paper band filter Wet grinding unit Electronic dressing device Cross clamping Grinding spindle mounting: Taper 75 Magnetic chuck: 1,500 x 900 No rotary table

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Ljdsgq Un Aepfx Adushp Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Condition: good (used), Year of construction: 1994, Slot boring machine JAGO B4 PN TR Year of manufacture 1994 Locking device for dowel and row drilling Pitch 16,22,25,32 mm Compressed air eccentric clamp Line laser Table top height 860 mm Table top size 580 x 300 mm Table top rotatable Drill chuck clamping range 1 - 20 mm Drill length 200 mm Max. drilling depth 150 mm Height adjustment range 200 mm Pneumatic lifting of the drill motor for 2 levels via manual valve Longitudinal and lateral stops Adjustable miter fence Motor power 2.2 kW Voltage 400/50 V/Hz Speed 1500/3000 rpm Space requirement 1295x1180 mm Ljdpfxoubymie Aduohp Net weight approx. 230 kg

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Lhjdpfjwaa Iuox Adusp

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Drilling depth: 150 mm Ledsgzlq Eopfx Adushp Slot length: 250 mm Height adjustment range: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: ready for operation (used), An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich. Lhodjwwvwaspfx Adujp

Condition: used, Year of construction: 1988, dowel hole drill device: division 16, 22 25, 32 max depth of the slot: 145 mm max length of the slot: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 2800 U/min suction connection: 100 mm machine length: 1280 mm Lodeqx Ig Aepfx Aduohp machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Lsdpfxsv S Diuj Adushp Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Lodpfewhuu Eex Adujhp Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg