Used Cable Slot Machine Superior K 74 for sale (99,010)

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Dcsdpfx Aow U Dwhec Hsn

Condition: good (used), Year of construction: 1998, max. size 52 x 74 cm perfecting: 2/0 - 1/1 Dsdpfx Aow I E N Ssc Hecn age 1998 CP-Tronic Alcolor film dampenings cooling unit Technotrans Autoplate automatic washing devices dry sprayer Grafix Alphatronic shown totalizer: approx. 39 mill. impressions

Condition: used, Year of construction: 2018, Manufacturer: Lange Maschinenbau Model: B 70 K Used machine Year of manufacture: 2018 Machine for edge heights up to 100 mm! Factory-inspected Equipment/features: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronised with the belt feed Dodpewka S Ijfx Ac Hecn - Adjustable edge thickness via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with supply from below and rapid heat-up time after machine stoppage - End trimming unit for workpiece front and rear edges, automatic sensing on the workpiece, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustments via digital counters, two powerful 0.4 kW high-frequency motors, stepless speed control from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, two chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, support rail can be extended by approx. 300 mm - Rotatable film tray Ø 800 mm Technical Details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 100 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Maximum roller separation: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total power requirement: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film tray Ø 800 mm) - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Offered for sale is a Kolbe bone saw, 380V. V2A. Model: K-330. Year: 2011. The saw is fully functional and ready for immediate use. Further information available upon request. Dcodpfjw Nbc Rex Ac Hsn Payment in cash or by advance payment! Sale only to businesses, no guarantee, no warranty.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 300 mm, sheet thickness (max.): 150 mm, pass-through width: 300 mm, nominal power: 7.5 kW (10.20 HP), LÖWER SmartGrinder SG 300 K Wet Grinding Machine for Grinding or Deburring Metal - 1 contact roller unit with height adjustment via gear and handwheel - Workpiece thickness: 0.5 - 150 mm - Abrasive belt size: 300 x 3000 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing 240 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing approx. 505 mm (6 sections) - Drive motor: 7.5 kW - Ammeter for performance display - Infinitely variable feed speed via conveyor belt: 2 - 9 m/min - Digital counter with zero reset (instead of absolute counter) - Upper tank with drain opening D = 120 mm - Two jet water nozzles, completely piped - Rubber-coated and grooved contact roller, 150 mm diameter - Contact roller hardness: 65° Shore - Additional HT grinding wheel, roller grit 120 - Infinitely variable abrasive belt speed: 7.5 - 22 m/s, adjustable via frequency converter and potentiometer for matching cutting speed during deburring or finishing - Grooved rolls for abrasive and conveyor belts - Height adjustment via handwheel, with digital display - Manual paper band filter with perforated sheet filter carrier above the settling tank. Includes holder, reel, and fleece roll. The filter fleece must be advanced manually. Dcjdpfx Acsxbpt He Hon - Infeed guard with emergency stop - Additional rubber-coated pressure roller - Pneumatic belt tensioning - Rubber-coated spring-mounted pressure rollers, height and distance adjustable - Settling tank with matching pump - Dimensions (L x W x H): 1700 x 900 x 2400 mm - Weight: 685 kg - Operating voltage: 400 V, 50 Hz, 3-phase - Operating pressure: 6-8 bar - CE compliant Various VSM grinding fleece (100/180/240), approx. 3 pieces each at €153.00 each Various VSM zirconia alumina (80/120/240), approx. 15 pieces each at €16.35 each The machine has barely been used (only once in 2025!) and is in like-new condition! Absolutely WITHOUT defects Original price over €29,000 + VAT

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions: Dedelz Nxwjpfx Ac Hjcn

Condition: good (used), Duco through-hole drilling machine with grid system Dcodpfxew Huhpo Ac Hen

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Dedpfx Aoq E Ti Hec Hecn

Condition: used, Year of construction: 2023, Used machine Dcedpfew E Tz Esx Ac Hjn Year of manufacture: 2023 Unused Worktable rotatable ±60° on both sides Easy operation via single-lever control for fast and precise work Drilling head mounted on double guides Clamping stops allow simple and quick adjustment of the drilling head travel Height adjustment of the drilling head via handwheel with digital display Standard dowel drilling unit with grid positions 16 / 22 / 25 / 32 Manual eccentric clamp as standard Robust steel/cast-iron construction Powerful motor Technical data: Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Worktable swivel: ±60° Worktable length: 565 mm Worktable width: 315 mm Drilling head height adjustment: 160 mm Tool clamping diameter: 0 - 20 mm Spindle speed: 3000 rpm Extraction port diameter: 90 mm Dimensions and weight Length (product): approx. 1290 mm Width/depth (product): approx. 980 mm Height (product): approx. 1270 mm Weight (net): approx. 260 kg Electrical data Connection voltage: 400 V Network frequency: 50 Hz Output power: 2.2 kW Supplied with manual eccentric clamp Availability: short notice Location: Saxony-Anhalt

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Dodpfx Aewaa Iusc Hscn

Condition: used, Dowel hole drilling device: no Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Machine length: 1280 mm Djdpjw H Ip Tofx Ac Hscn Machine width: 960 mm Weight: 200 kg

Condition: good (used), Year of construction: 2005, max. size 53 x 74 cm perfecting: 2/0 - 1/1 age 2005 PressControl Alcolor film dampenings cooling unit Baldwin Autoplate automatic roller washing dry sprayer Weko shown totalizer: approx. 81 mill. impressions Dcedpfxjwtyf Hs Ac Hjn Delivery time: immediately

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Manufacturer: Jung, Machine transport roller: Steering mechanism type JL 12 K Dsdpsww Uzkjfx Ac Hscn -Load capacity: 12 t (with chassis approx. 24 t) -Support surface: Ø 170 mm -Support height: 110 mm -Chassis: 4 transport rollers in stock can be supplied for an additional charge, see ID 35936 -Transport dimensions: 970/950/H260 mm -Weight: 67 kg

Condition: used, Year of construction: 2020, gebraucht 2020 8208 prompt, Zwischenverkauf v Taiwan 44900 € 1 3100 mm Dcodpewirk Hofx Ac Hjn 3.5 mm Hydraulisch 135 ° 4300 mm 1770 mm 1890 mm 4520 kg 800 mm MINT CONDITION 2 axes CNC control Schneider 7 "touchscreen segmented tool(6x150, 10x125, 5x100, 6x75mm segmented) motorized backgauge 800 mm user manual in GERMAN and English

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270 Baujahr: 2007 Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Dedpfx Acewf I Hie Hscn Schnecken DN: 35 mm Max. Hubvolumen: 123 cm³ Spritzteilgewicht in PS: 118 g

Condition: ready for operation (used), An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich. Dcedpfewwvwaox Ac Hen

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Drilling depth: 150 mm Slot length: 250 mm Height adjustment range: 145 mm Dedpsgzlq Eefx Ac Hocn Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: good (used), Year of construction: 2000, width 76 cm age 2000 flat pile feeder with Vaculift and Vacubelt counter MPC 6 folding pockets in the parallel fold section Dedpow A Il Hofx Ac Hjcn following knife shaft 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold noise absorbing hood stacking delivery SAP Delivery time: immediately from stock

Condition: ready for operation (used), Year of construction: 2002, A special construction machine service for the carton packaging industry is available. Packaging capacity: 110 cycles/min, min. carton dimensions X/Y/Z: 60mm/20mm/130mm, max. carton dimensions X/Y/Z: 160mm/90mm/265mm, format 1: 72mm/31.5mm/244mm, format 2: 96mm/39mm/240mm, format 3: 87mm/46mm/161mm. Product: Food in blister/tubular bags, chain pitch: 8 inches, rotation deflector: 30mm, cassette belt center distance: 3454.4mm, belt width: 350mm, number of cassettes: 37. Machine dimensions X/Y: approx. 5250mm/1050mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible. Dcjdpov Dkcrjfx Ac Hsn

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Dodpfx Acegq Un As Hjcn Weight: 240 kg

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Dcsdpfxeulku Hs Ac Hjn

Condition: used, Year of construction: 1988, dowel hole drill device: division 16, 22 25, 32 max depth of the slot: 145 mm max length of the slot: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 2800 U/min suction connection: 100 mm machine length: 1280 mm Dsdpfx Aeqx Ig Aoc Hocn machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Dcjdpjv S Diuofx Ac Hon Machine width: 960 mm Weight: 250 kg

Condition: as good as new (ex-display), Year of construction: 2025, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 180 mm Dcjdpov N Tyqjfx Ac Hon Slot length: 240 mm Height adjustment range: 160 mm Motor power: 2.2 kW Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 260 kg

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Dedpfx Acjwhuu Eo Hscn Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg