Used C60 for sale (310)

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters Iedpfx Aoxck U Uog Dsa

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,428 h, load capacity: 6,000 kg, lifting height: 4,100 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25 R15, rear tire type: superelastic tires (black), rear tire size: 315/70 R15, overall weight: 15,500 kg, empty load weight: 9,500 kg, total height: 3,200 mm, total length: 4,700 mm, total width: 2,300 mm, color: yellow, motor model: TCD 3.6 L4, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, 🔍 Looking for a reliable forklift? We are industry specialists! 💼 We specialize in the sale of high-quality forklifts, offering verified machines in excellent condition. ✅ Explore our inventory and find the ideal solution for your business! 🚜 Highlighted in this listing: COMBILIFT C6000FSL – DUPLEX 4100mm – Year 2019 – 4428 HOURS – DIESEL – FREE LIFT – FORK POSITIONER – SIDELOADER – 1400MM FORKS – CONDITION: 5/5 ⭐ This forklift is in excellent technical condition and ready for immediate deployment. 🔧 🔧 Key Features and Technical Specifications: Model: COMBILIFT C6000FSL Year of manufacture: 06/2019 📅 Lifting capacity: 6,000 kg ⚖️ Operating hours: 4,428 h ⏱️ Mast type: Duplex Lift height: 4,100 mm 📦 Power: Diesel ⛽ Load center: 600 mm Total weight: 9,500 kg 🛞 Tyres: Solid, superelastic tyres in good condition Front tyres: Superelastic – 8.25 R15 – ✅ 100% TREAD Rear tyre: Superelastic – 315/70 R15 – ✅ 100% TREAD 📐 Dimensions: Overall height (mast lowered): 2,950 mm Fork length: 1,400 mm Free lift: 1,900 mm Total height (mast extended): 3,200 mm Overall length: 4,700 mm Overall width: 2,300 mm Positioner width: 1,320 mm ⚙️ Equipment: 💡 Lighting system 🎯 Adjustable boom 🥄 Pallet forks 🎚️ Fork positioner 🛠️ Operator cabin 📏 Side platforms – 1,400 mm 💡 Perfect for industries requiring efficient handling of long loads in confined spaces – ideal for timber, steel, or pipe sectors. 🧩 Additional Features: 🔄 Integrated multi-directional steering system 👨‍✈️ Ergonomic operator’s cabin 🏋️‍♂️ High reliability during intensive operation 🏭 Suitable for both outdoor and indoor warehouse applications 📦 Condition: Fully operational, regularly maintained, and immediately available for work. Ijdpfx Agjxzkb Eo Dea 🚚 We offer Europe-wide transport and provide a FREE initial inspection! 🎁

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,813 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,380 mm, power: 74 kW (100.61 HP), drive type: Diesel, Four-way side loader Ijdpfx Aewx Agdeg Dsa Load centre of gravity: 0 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Rear tyres type: Superelastic Description: Fork positioner, 3rd valve, rear work light, front work light, heating, full cabin, full free lift,

Condition: used, SAUTER Platform Scale Display unit SAUTER Type: E 1200 Isdpfsxf Uwrox Ag Dja Serial No. Weighing range max.: 600 kg Weighing range min.: 2.5 kg Partial range 0 kg to 150 kg Partial range 150 kg to 300 kg Partial range 300 kg to 600 kg Mains connection: 230 Volt, 50 Hz Weighing unit SAUTER Type ECC 600 Serial No. 1400286 Platform size: 1000 x 800 mm Installation height: 120 mm - Tare function Footprint L x W x H: 1000 x 800 x 120 mm Net weight: 100 kg Scale requires repair, always indicates too much weight.

Year of construction: 2012, condition: good (used), Hubert Cloix PC60FA Pastocooker Serial: 1053 2012, Stainless, 60L Pastocooker, with agitation and scrape surface, refrigerated air cooling, temperature control, previously used for custard, cream, and other cake products, mobile, 3Ph Iodpfxouqcnio Ag Dja

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,350 mm, fork length: 1,500 mm, overall weight: 12,500 kg, empty load weight: 6,000 kg, total height: 3,350 mm, total length: 2,700 mm, total width: 2,850 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, We sell forklifts after a full service. Isdpfxexx T U Ne Ag Dsa Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Iedpjxc Ttmsfx Ag Doa Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,428 h, load capacity: 6,000 kg, lifting height: 4,100 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25 R15, rear tire type: superelastic tires (black), rear tire size: 315/70 R15, overall weight: 15,500 kg, empty load weight: 9,500 kg, total height: 3,200 mm, total length: 4,700 mm, total width: 2,300 mm, color: yellow, motor model: TCD 3.6 L4, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, 🔍 Looking for a reliable forklift? We are industry specialists! 💼 We specialize in the sale of high-quality forklifts, offering verified machines in excellent condition. ✅ Explore our inventory and find the ideal solution for your business! 🚜 Highlighted in this listing: COMBILIFT C6000FSL – DUPLEX 4100mm – Year 2019 – 4428 HOURS – DIESEL – FREE LIFT – FORK POSITIONER – SIDELOADER – 1400MM FORKS – CONDITION: 5/5 ⭐ This forklift is in excellent technical condition and ready for immediate deployment. 🔧 🔧 Key Features and Technical Specifications: Model: COMBILIFT C6000FSL Year of manufacture: 06/2019 📅 Lifting capacity: 6,000 kg ⚖️ Operating hours: 4,428 h ⏱️ Mast type: Duplex Lift height: 4,100 mm 📦 Power: Diesel ⛽ Load center: 600 mm Total weight: 9,500 kg 🛞 Tyres: Solid, superelastic tyres in good condition Front tyres: Superelastic – 8.25 R15 – ✅ 100% TREAD Rear tyre: Superelastic – 315/70 R15 – ✅ 100% TREAD 📐 Dimensions: Overall height (mast lowered): 2,950 mm Fork length: 1,400 mm Free lift: 1,900 mm Isdsxyq Rqopfx Ag Dja Total height (mast extended): 3,200 mm Overall length: 4,700 mm Overall width: 2,300 mm Positioner width: 1,320 mm ⚙️ Equipment: 💡 Lighting system 🎯 Adjustable boom 🥄 Pallet forks 🎚️ Fork positioner 🛠️ Operator cabin 📏 Side platforms – 1,400 mm 💡 Perfect for industries requiring efficient handling of long loads in confined spaces – ideal for timber, steel, or pipe sectors. 🧩 Additional Features: 🔄 Integrated multi-directional steering system 👨‍✈️ Ergonomic operator’s cabin 🏋️‍♂️ High reliability during intensive operation 🏭 Suitable for both outdoor and indoor warehouse applications 📦 Condition: Fully operational, regularly maintained, and immediately available for work. 🚚 We offer Europe-wide transport and provide a FREE initial inspection! 🎁

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Iedpowtft Njfx Ag Dja Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, NEW ARRIVAL 1 CNC MILLING MACHINE HERMLE C 600V, Year 2006 CNC CONTROL: HEIDENHAIN ITNC 530 Isdoxf Huvepfx Ag Dja TRAVEL PATHS: 600 x 450 x 450 mm - INFINITELY VARIABLE SPINDLE SPEED UP TO 10,000 RPM - MACHINE WITH ELECTRONIC HANDWHEEL - PROBE - APPROX. 30 TOOL HOLDERS - COOLANT SYSTEM - FIXED TABLE, ETC. PRICE ON REQUEST plus 19% VAT, ex location, unpacked, uninsured Technical data as per attachment, non-binding - errors and prior sale excepted. Delivery: immediately – subject to prior sale. Payment: strictly net, immediately upon receipt of invoice, before removal/collection. We are happy to show you the machine under power by arrangement, demonstrating all functions.

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model MILLPLUS Main Drive Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 700 mm Z-Axis Movement 600 mm Turret Number of turrets 1 This 5-axis DECKEL MAHO DMC 60 Hi Dyn was manufactured in 2002. It features a HEIDENHAIN MILLPLUS CNC, pallet dimensions of 630 x 500 mm, and a magazine capacity of 60 tools. The spindle taper is SK 40, and it includes internal coolant through the spindle at 40 bars. Consider the opportunity to buy this DECKEL MAHO DMC 60 Hi Dyn vertical machining centre. Contact us for more information. Iedpfexfctnsx Ag Dea Application Types Milling

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 3 * MOT.1LA8 317-2AC60Z315, power: 315 kW (428.28 HP), nominal power: 315 kW (428.28 HP), rotational speed (min.): 2,976 rpm, rotational speed (max.): 3,600 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 520 A, type of input current: three-phase, total length: 1,400 mm, total width: 1,000 mm, total height: 1,000 mm, type of cooling: air, protection type (IP code): IP50, number of previous owners: 2, USED. SUITABLE FOR USE. POSSIBILITY TO REPLACE WITH NEW SKF BEARINGS AT AN ADDITIONAL COST. Iedpfsxxahiex Ag Dsa

Condition: good (used), Year of construction: 2009, Ref. -No.: 10556 Ijdpsxc Tt Tefx Ag Dja Manufacturer: DMG MORI Type: DMC 60 FD Year of construction: 2009 Type of control: CNC Control: Siemens 840DSL-721 Storage location: Halberstadt Country of origin: Germany X-Travel: 630 mm Y-Travel: 800 mm Z-Travel: 850 mm Max. Workpiece diameter: 600 mm Max. Workpiece Weight: 400 kg Turning Speeds: 12000 RPM Tool changer: 60 Max. Workpiece height: 500 mm Weight Of The Machine Ca.: 10 t Numbers Of Pallets: 2 Motor spindle: 24000 RPM Further information: - Internal cooling - Swivel range of the B-axis -5/ +110° - Cooled table console, table bearings and motors - Cooled bearing blocks and spindle nuts of the ball screw drives - Cooled guides in the linear axes X/Y/Z - Drive power: 100%ED/40%ED 24 KW/35 KW - Chip conveyor - Internal coolant supply - Electric handwheel - Rotary function Rotary table - Operating mode 4 - 2 pallets ø 630 mm - Rotary pallet changer - IKZ 40bar , 980 liters, paper belt filter - Dsc Htetzywvjlwwxokp - Measuring probe Heidenhain - 3D Quickset Machine can be inspected under power by arrangement.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,242 h, load capacity: 6,000 kg, lifting height: 6,300 mm, fuel type: diesel, mast type: triplex, construction height: 3,080 mm, fork length: 1,400 mm, drive type: Diesel, Four-way sideloader Mast type: Triplex Technical condition: good Isdju Acxgjpfx Ag Dea Fork positioner,

Condition: ready for operation (used), Siemens 6SC6000-0NA00 FGB control E Stand K SN HO.44745-BIL 36, used, minor signs of wear, 100% functional, scope of delivery as per photos Isdpsxagynofx Ag Dea

Condition: excellent (used), OptiCoater 600 in lovely condition. Perfect for high throughput coating lines. Ijdev Ig Rgspfx Ag Dea

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Isdpfx Ajxqtgvsg Doa Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 80 h, load capacity: 6,000 kg, lifting height: 4,900 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,665 mm, fork carriage width: 2,040 mm, fork length: 2,000 mm, empty load weight: 10,113 kg, drive type: Diesel, construction width: 2,120 mm, Diesel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 8.25-15 14PR Ijdpfx Aet Dd Ikjg Dsa Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 8.25-15 14PR Rear tires condition: 80 - 100% Description: Half cabin, lighting similar to road-traffic regulations, 3rd + 4th valve up to carriage, beacon, rear work lights, manual control levers, sideshifter, fork positioner, Kaup fork positioner with sideshift, opening range fork arm to fork arm 825-1850 mm, residual load capacity: 4,900 kg, 3rd valve, 4th valve, rear work lights, front work lights, half cabin, twin tires, interior mirror, exterior mirror, beacon, windscreen wiper, seat.

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 600 mm, warranty duration: 12 months, input voltage: 400 V, total height: 1,250 mm, total width: 1,000 mm, total length: 1,080 mm, noise level: 65 dB, We offer Parts Washer PC 60/130 T for sale Catalogue number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us come with a 12-month WARRANTY. Iedpewzwuzefx Ag Dea Equipment features: • Operating hours counter • Stainless steel safety grate • Swivel castors, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump performance: 4500 l/h • Connection power: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Housing/frame: Stainless steel (1.4301) • CE certified • Heater power: 4.5 kW • Maximum temperature: 80°C • Adjustable wash time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank capacity: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, with easy operation ensured by a clear control panel and indicator lights displaying all working stages. The washing fluid temperature is maintained within the range of 35 to 80°C and is controlled via thermostat. Thanks to specially designed housing profiles (mechanical labyrinth seals), the PC 60/130 T operates without perishable rubber seals. Gas struts equipped with dampers guarantee effortless lid opening, while a ball valve enables easy draining of the cleaning fluid. The Kärcher parts washer operates in a closed-circuit system (using an electric pump) with a water-based cleaning solution instead of solvents, ensuring that the operator is not exposed to hazardous vapours.

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 6,010 mm, total length: 2,650 mm, · Spurbreite vorn 2500mm · Breite zwischen den Radarmen 1650mm · Überhang vorne 307mm · Überhang hinten 208 mm · Verlustmaß 1180mm · Anfahrwinkel max 45° · Rampenwinkel max 29° · Abfahrwinkel max 45° · Mastneigung nach vorn 3° · Mastneigung nach hinten 5° · Außenradius Minimum 2540 mm · Außenradius 750mm · Plattformhöhe 1250mm · Höchstgeschwindigkeit 15 km/h · Steigfähigkeit 15% · Standard Lackierung Grün und Grau Ijdpfoxd Hbajx Ag Dsa · Gefederter Sitz KAB Model 211 · Gummimontierte halboffene Kabine · Multidirektionaler Betrieb · Hydrostatischer Allradantrieb · Lastsensible Lenkung · 4-Wege Rad Positionerung · Hydraulischer Ölkühler

Condition: ready for operation (used), Siemens 6SC6000-0NA00 FGB control E Stand K SN HO.44746-BIL 36, used, minor signs of wear, 100% functional, scope of delivery as per photos Isdpfx Aexagyheg Doa

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0-250-15-0310, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, number of slots in tool magazine: 9, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking Ijdexdw Tgepfx Ag Dja EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,428 h, load capacity: 6,000 kg, lifting height: 4,100 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25 R15, rear tire type: superelastic tires (black), rear tire size: 315/70 R15, overall weight: 15,500 kg, empty load weight: 9,500 kg, total height: 3,200 mm, total length: 4,700 mm, total width: 2,300 mm, color: yellow, motor model: TCD 3.6 L4, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, 🔍 Looking for a reliable forklift? We are industry specialists! 💼 We specialize in the sale of high-quality forklifts, offering verified machines in excellent condition. ✅ Explore our inventory and find the ideal solution for your business! 🚜 Highlighted in this listing: COMBILIFT C6000FSL – DUPLEX 4100mm – Year 2019 – 4428 HOURS – DIESEL – FREE LIFT – FORK POSITIONER – SIDELOADER – 1400MM FORKS – CONDITION: 5/5 ⭐ This forklift is in excellent technical condition and ready for immediate deployment. 🔧 🔧 Key Features and Technical Specifications: Model: COMBILIFT C6000FSL Year of manufacture: 06/2019 📅 Lifting capacity: 6,000 kg ⚖️ Operating hours: 4,428 h ⏱️ Mast type: Duplex Lift height: 4,100 mm 📦 Power: Diesel ⛽ Load center: 600 mm Total weight: 9,500 kg Ijdpfx Agsxw Edmj Dja 🛞 Tyres: Solid, superelastic tyres in good condition Front tyres: Superelastic – 8.25 R15 – ✅ 100% TREAD Rear tyre: Superelastic – 315/70 R15 – ✅ 100% TREAD 📐 Dimensions: Overall height (mast lowered): 2,950 mm Fork length: 1,400 mm Free lift: 1,900 mm Total height (mast extended): 3,200 mm Overall length: 4,700 mm Overall width: 2,300 mm Positioner width: 1,320 mm ⚙️ Equipment: 💡 Lighting system 🎯 Adjustable boom 🥄 Pallet forks 🎚️ Fork positioner 🛠️ Operator cabin 📏 Side platforms – 1,400 mm 💡 Perfect for industries requiring efficient handling of long loads in confined spaces – ideal for timber, steel, or pipe sectors. 🧩 Additional Features: 🔄 Integrated multi-directional steering system 👨‍✈️ Ergonomic operator’s cabin 🏋️‍♂️ High reliability during intensive operation 🏭 Suitable for both outdoor and indoor warehouse applications 📦 Condition: Fully operational, regularly maintained, and immediately available for work. 🚚 We offer Europe-wide transport and provide a FREE initial inspection! 🎁

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Isdpfxotyyn Hj Ag Dea

Condition: ready for operation (used), Siemens 6SC6012-4AA02 rack, used, in good condition, 100% fully functional Isdpfx Asxagyusg Doa