Used C60 for sale (324)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Hodpfx Ajviwdmsg Uefb Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2019, Technical Data: Pressure: 1.5 / 0.15 bar / MPa Flow rate: 4,500 l/h Working diameter: 600 mm Usable height: 310 mm Casing/frame: Stainless steel Heating capacity: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (LxWxH), approx.: 1080 x 1000 x 1250 mm Weight, approx.: 165 kg Hfodpewpq Absfx Ag Ueb Features: - Fully automatic parts cleaning - Oil skimmer kit - Motor-driven turntable - 3-dimensional nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Condition Used Maximum weight of the part 1000 kg X 600 mm Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Wire diameter 0.10 to 0.30 mm CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg Hodpfx Asx Avh Hog Uefb

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,148 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, table length: 2,500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Number of axes: 3 Table length: 2,500 mm Table width: 600 mm Tool holder: SK40 Main spindle power: 20 kW Max. spindle speed: 12,000 rpm Tool magazine: 30 MACHINE DETAILS Hfedpox Hzn Aofx Ag Ueb Dimensions (L x W x H): 5,000 x 2,500 x 3,000 mm Net weight: 10,500 kg Power: 20 kW Operating hours: 11,148 h EQUIPMENT - Tool magazine - Chip conveyor - External cooling - without machine vices.

Condition: used, _____ Description: Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpm Movement X/Y/Z : 650/550/400 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power (max.):13,5 kW Taper:HSK-E40 Workingtable: Clampingsurface:530 x 900 mm Tableloading (max.):600 kg Hjdpfxowx T T Us Ag Uefb In general: Toolmagazine:60 Stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Chipmanagement:Chiptray Coolingmanagement:Minimumlubrication Workpiecemeasurement:Touch probe, Renishaw OMP 400 Toolmeasurement:Laser, BLUM Setup operations:Electronic handwheel Further Equipment:Spindlechiller

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 192480, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale is an Arburg Allrounder 370 C 600-100 injection moulding machine. The machine is in well-maintained, fully functional condition. Optional accessories are negotiable. Hedpfox Uth Dox Ag Ujfb

Condition: used, Year of construction: 2011, Technical details: tube diameter: 60 mm wall strength: 3,0 mm bending radius min.: 20 mm tube diameter max.: 60 mm wall thickness max.: 3,0 mm tube pipe draw up length: 1500 mm bending angle max.: 180 + Auffederung ° Number of working hours: ca. 34 797 h Total power requirement: 55 kW Weight approx.: 8,0 t machine dimensions LxWxH: 6,3 x 3,3 x 1,9 m dimensions electric cabinet LxWxH: 2,7 x 0,7 x 2,0 m dimension device 1: Steuerpult: 0,9 x 0,6 x 1,85 m dimension device 2: Rohrmagazin: 1,8 x 2,4 x 1,75 m This is an automatic pipe cold bending machine. Hsdpfx Ajx Sll Ajg Usfb Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø : 16mm max. capacity of machine Tube Ø x wall thickness: mild steel=Ø 60x3 mm and stainless steel=Ø 57x2 mm Bending radius to pipe center: min. Ø 20 mm max. Ø 200 mm Bending to left. max. tensile strength of the material to be bent: Stainless steel 750 N/mm² mild steel 450 N/mm² max. bending speed: FORWARD, infinitely variable / programmable 22.0 1/min. RETURN, constant 22,0 1/min. Height adjustment multiple radii: lowest tube center 55 mm Height travel suitable for 3-groove bending tools Twisting: Twisting angle max. 360°; speed 50 min-1 -gripper -tube magazine Schwarze-Robitec, tube length min./max.: 400 7 1500 mm, tube outer Ø min./max.: 28 7 60 mm -Hydraulic filling volume 340 liters -Hydraulic operation for: bending table drive; tool clamping; slide rail pressure, direct acting; reinforced slide rail feed and return; mandrel return feed device -operator/control panel from Schwarze Robitec -2x foot contact operation -cooling unit on control cabinet Rital, type SK 3361100 accessories: div. bending tools for Ø 60 mm tube div. auxiliary tools *

Condition: excellent (used), Year of construction: 1999, CNC horizontal machining center DECKEL MAHO DMC 60 H SIEMENS CONTROL Year of manufacture: 1999 Technical data: Hedevn Ra Sepfx Ag Uefb X-axis: 600mm Y-axis: 560mm Z-axis: 560mm B-axis: 360° Pallet: Number: 2 Size: 400x500mm Permissible load: 600kg Weight: 10,500kg

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) Hfjdpfx Agem Ak Hue Usb We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1999, HERMLE C600 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC430 CONTROL UKUK Hodpfjx A Hgtjx Ag Uofb Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=600mm, 'Y'=450mm, 'Z'=450mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. 30 Position ATC. S/No. 12859 (1999).

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 61 kVA, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 4,000 kg, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 500 mm, table length: 630 mm, table load: 4,000 kg, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 19,500 h, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: Hfodporxrklefx Ag Ujb - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 190958, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale: Arburg Allrounder 370C 600-100 injection moulding machine. The machine is in a well-maintained, fully functional condition. Optional accessories are negotiable. Hfedpfx Ajx Utggog Ujb

Year of construction: 2008, condition: ready for operation (used), Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls smaller 120mm and CNC singulation for balls larger 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement. Hfsdpfex Th Nmsx Ag Ueb

Condition: used, Year of construction: 1999, x-travel 600 mm Hjdoxzk Ryspfx Ag Usfb y-travel 560 mm z-travel 560 mm weight of the machine ca. 8500 kg

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Application Types Hfjdpfox D Ir Tsx Ag Uob Cutting

Condition: ready for operation (used), Balluff BIS C-6002-19-…-03-ST11 0733 DE / BIS C-650 evaluation unit, used, normal signs of wear, 100% functional, scope of delivery as per photos Hfjdpfx Agsi D T Dye Usb

Condition: excellent (used), Year of construction: 2019, HOMAG DRILLTEQ C-600 (BHT500) Portal machining center with fully automatic workpiece feed, for processing workpieces made of wood or wood-based materials. - powerControl System WoodWOP / WINDOWS 7 - 21.5-inch full HD TFT display - Vertical drilling units with up to 38 drilling spindles Hjdpfox Rt Dkjx Ag Uefb - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X direction - Workpiece dimensions: Length 250-2500mm / Width 100-1400mm (or 2x600mm) / Thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2019 - Immediately available

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm Hfjdpfju Ibu Rex Ag Uob -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: good (used), Pressure switch -Type: C6045D 1043 -0.2-3 mbar -220/240 VAC 50 Hz 12(2) A -Pmax: 100 mbar -Protection class: IP 40 -Quantity: 4 pieces available Price: per piece -Weight: 1.2 kg Hjdeb A Hwfspfx Ag Uefb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, C6085 in very good working condition PF with scanner LU XL RU IQ501 IC313 FS532 FS532 Expandable counter Price negotiable Hfodpfx Aex Na Hceg Uob

Condition: new, Year of construction: 2026, Yanigav Circular Saw SC600E / SC600M • Drive: Electric single-phase motor 3.1kW / Gasoline engine • Saw blade diameter: 60cm / 60cm Hfodpfsr D Nkpex Ag Ueb • Saw blade bore: 30mm • Tooth depth: 28cm / 28cm • Rotation: 1450 rpm • Weight: 90kg / 100kg Price: €1395 / €1615

Condition: ready for operation (used), Siemens 6SC6000-0NA00 FGB control E Stand K SN HO.44745-BIL 36, used, minor signs of wear, 100% functional, scope of delivery as per photos Hfsdpfoxagynox Ag Uob

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) Hedpfx Agjr Ndi Ie Ujfb - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production - Connected loads 380V, 10A, 50Hz, 5kW - Price 1.500,00 €

Condition: ready for operation (used), Siemens 6SC6000-0NA00 FGB control E Stand K SN HO.44746-BIL 36, used, minor signs of wear, 100% functional, scope of delivery as per photos Hfodpfoxagyhjx Ag Ujb

Condition: ready for operation (used), Siemens 6SC6012-4AA02 rack, used, in good condition, 100% fully functional Hfjdpfjxagyuex Ag Uob