Used C200 for sale (191)

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. Ljdpfxjv D Nxle Ad Asrk The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Lrodpsw Rm Diefx Ad Aok Height: 2800mm Weight: 6100kg

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 27000 kg Measurements height 3400 mm Movement X-Axis Movement 2050 mm Z-Axis Movement 800 mm Y-Axis Movement 1100 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Tool taper BT 50 Tools Slots in storage 40 Dimensions Machine Length 7200 mm This 3-axis Johnford VMC-2000SHD was manufactured in 2005. It features a large table size of 2200 × 1000 mm and extensive travels: X-axis at 2050 mm, Y-axis at 1100 mm, and Z-axis at 800 mm. With a spindle speed ranging from 10 to 6000 rpm and a tool magazine capacity of 40 tools, this vertical machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Lodex D Idvepfx Ad Aork Application Types Milling

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Lrjdpfexyyxqex Ad Aek Extras (optional) Other screw sizes available.

Condition: excellent (used), Year of construction: 2014, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Lrsdsyktgqopfx Ad Ajk Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive in X-axis; ball screw drive in Y- and Z-axes • Axis travel: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) (Optimat BHC200) • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head Ledpfxswx Iido Ad Aerk o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: Good; very well maintained, serviced regularly / last service 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens Industrial PC) - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining of a wide range of materials • Ideal for joineries, furniture manufacturers, and custom productions • Reliable performance even for demanding projects Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION DEVICES - Side and rear safety fencing - Three-segment safety tread mat in the front area allows loading of workpieces in the non-active working zone Inspection and test run on site are welcome! Dismantling and transportation are to be arranged by the buyer.

Condition: ready for operation (used), Schoppe & Faeser AEC 200 transmitter, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Lredpfx Aoi Ec Ibjd Ask

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible. Lodjg Ugbrjpfx Ad Asrk

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Ljdpfx Adjhqd Tve Asrk Vacuum up to 4300 Pa Filtration surface 128 m2

Year of construction: 2003, condition: used, Pbt 25 pc 200 obtained by trade-in Lrsdpfx Aof Rih Djd Aek Machine's really in new condition! Hour counter is at 622 hours!!!   the picture&#39,s say enough. , JWV Service is an importer for the Netherlands and Belgium of PBT profile rolling machines and dealer of Meba band saw machines, Faccin plate rolling machines and various other brands. The team of JWV Service has 25 years of experience in troubleshooting and overhauling metalworking machines. Look up for more machines.

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) * Lrsdpfx Asu Idn Hsd Ajk

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal Lodpfxjvtyf Is Ad Aerk -MFR converter

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Lredom H Urhopfx Ad Ajk

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, turning diameter over cross slide: 620 mm, turning length: 560 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 615 mm, Horizontal CNC Lathe HTC200 II x 560 SHOWROOM MODEL, AS GOOD AS NEW Working Area: Max. swing diameter over bed: Ø620 mm Max. swing diameter over carriage: Ø410 mm Max. turning diameter: Ø400 mm Max. turning length: 560 mm Spindle center height: 1035 mm X-axis travel: 215 mm Z-axis travel: 615 mm Motorized High-Speed Spindle Max. spindle speed: 4,500 rpm Spindle power (continuous/30 min overload): 11/15 kW Spindle torque: 158/211 Nm Spindle nose taper: DIN55026 A2 6 Spindle bore: Ø66 mm Spindle bearing diameter: Ø100 mm Chuck size: 8 inches Turret Turret type: Servo V12 OD tool size: 25x25 mm ID tool size: Ø40 mm Indexing time (tool to tool): 0.2 s Tailstock: Tailstock type: Hydraulic Quill diameter: Ø100 mm Quill taper: MT No.5 Quill stroke: 122 mm Tailstock travel: 550 mm Feed Shaft X/Z-axis travel: 215/615 mm Rapid traverse X/Z-axis: 24/30 m/min Type of guideway: Linear guideway X/Z-axis drive power: 1.8/1.8 kW Control System: FANUC 0i-TF Power supply: 35 kVA Coolant capacity: 240 l Machine weight: 4.8 t Machine dimensions (LxWxH, without chip conveyor): 3097x1855x1755 mm Components Control: FANUC X/Z-axis ball screw: PMI (TW) Lodjywuxvopfx Ad Ajrk Spindle bearings: NTN/NSK (JP) Spindle ball bearings: FAG (GE) Chuck and cylinder: STRONG (TW) Servo turret: HISION (CN) Main components of pump and valves: NACHI (JP) Main lubrication system components: LIUBIAN (CN) Main electronic components: Schneider

Condition: ready for operation (used), Office copier Lsdexac N Espfx Ad Aerk

Condition: used, Year of construction: 2004, MAZAK VTC 200B II, year 2004 X axis: 1120 mm Y axis: 510 mm Z axis: 510 mm Spindle: max. 12,000 rpm SK40 Through-spindle coolant (IKZ) Table length: 1460 mm Table width: 510 mm Table load: 800 kg Tool changer: 30 positions Spindle power: 18.5 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Lrsdpfxeylnxke Ad Ajk IKZ: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling system: Yes

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Lodpfx Aexpqm Rod Aerk Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Year of construction: 1998, operating hours: 94,737 h, clamping force: 2,000 kN, screw diameter: 60 mm, injection pressure: 1,440 bar, injection weight: 427 g, Arburg 470C-2000-675 (Nr. 40) without picker Year of production: 1998 TECHNICAL DATA Screw Dia [mm]: 60 Shot Weight [g]: 427 Injection Pressure [bar]: 1440 Clamping Force [kN]: 2000 Tie Bar Distance [mm]: 470x470 Lredpfx Adovt Tb Aj Aek Platen Size [mm]: 715x715 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: Polish, German OTHER Power [kW]: 45,8 Workinghours [h]: 94737 Weight [kg]: 6630 EUROMAP

Condition: excellent (used), Year of construction: 2005, operating hours: 80,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 1,650 bar, injection weight: 434 g, Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General information Ledpfx Asvt Tp Hjd Aerk Product Code: 193 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 434 g Clamping Force: 2,000 kN Screw dia: 55 mm Injection pressure: 1650 bar Tie bar distance: 520x520 mm Platen size: 728x728 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: new, functionality: fully functional, empty load weight: 1,300 kg, maximum load weight: 2,200 kg, overall weight: 3,500 kg, loading space length: 5,500 mm, loading space width: 2,270 mm, loading space height: 2,080 mm, PRODUCT INFORMATION "CHEVAL LIBERTE ROADSTAR C2000 3500KG 550X227X208CM CAR TRAILER BOX TRAILER" The C2000 car trailer box trailer from Cheval Liberte / Debon combines large volume, an attractive design, an aerodynamic front, aluminum sides, an aluminum floor, and a polyester roof. Hardly any other car box trailer has such excellent handling as this one! The box trailer is equipped with the Pullman2 chassis, a proprietary ChevalLiberte development. A low loading height of just 38 cm, independent suspension with trailing arms, coil springs, and automotive-standard shock absorbers ensure optimal handling. The flat loading angle is ideal for loading a car. A loading ramp with additional loading rails and a particularly low chassis allow for loading even low-lying vehicles. The extensive standard equipment on the car trailer includes a poly roof with a one-piece poly front, aluminum walls, aluminum floor, two side doors, two side flaps, an electric cable winch, perforated support rails and wheel stops at the front, a 100 km/h speed limiter, interior light, aluminum rims, a spare wheel with aluminum rim, an automatic jockey wheel, tie-down eyes, a sturdy frame, and a V-drawbar. Dimensions: Loading width approx.: 220 cm, loading height approx.: 189 cm, loading width between the fenders (narrowest point) approx.: 215 cm, height from the perforated rail to the sales hatch approx.: 18 cm, the curve at the front is approx. 50 cm deep, thus the straight interior length is approx. 500 cm. Interior length to the cable winch approx.: 520 cm. We offer affordable accessories for box trailers, such as motorcycle rockers, support rails, motorcycle straps, tie-down rails, tie-down straps, rear supports, and tie-down eyes. The body is splash-proof. ----- You can also get: · Financing · Leasing (businesses only) · Consulting Lrjdpewa Scdefx Ad Ask · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, empty load weight: 600 kg, maximum load weight: 1,400 kg, loading space length: 2,880 mm, loading space width: 1,380 mm, loading space height: 1,730 mm, tire size: 165R13C, Refrigerated box trailer from trailer manufacturer TEMARED model Cooler 3015/2 2000kg 288x138x173cm. A low loader box trailer with cooling unit up to +6°c and extremely stable, welded and hot-dip galvanized frame. All-round insulation and cooling from renowned manufacturers such as GOVI or CIBIN. All Temared refrigerated boxes have a wide range of standard equipment. Insulated walls, refrigeration unit from Govi or Cibin 230V +6°c, an extremely sturdy hot-dip galvanized steel frame, double-leaf door, espagnolette lock, supports, lockable, interior light, automatic support wheel and a bolted V-drawbar. Lrjdpsrwzk Hjfx Ad Aok We offer accessories for Hapert refrigerated trailers such as shelves, lashing rails, 100km/h approval, tool box, lashing straps and anti-theft devices at a reasonable price.

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Lrjdpfxexc Eqqs Ad Aok Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Hot runner: 6x incl. conveyor belt

Condition: new, Year of construction: 2022, functionality: fully functional, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,500 mm, turning diameter: 2,500 mm, faceplate diameter: 2,000 mm, total height: 7,260 mm, total width: 6,280 mm, total length: 4,500 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 1 rpm, torque: 40,400 Nm, spindle speed (min.): 1 rpm, warranty duration: 24 months, overall weight: 45,000 kg, faceplate torque: 40,400 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW Lrjdevtytxopfx Ad Ajk - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 2000mm - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS X-axis travel: max. 840 mm Z-axis travel: max. 425 mm Feed diameter: max. 200 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 Ljdpfx Asyap Naed Aork MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 143773, Controller: Mazatrol PC-Fusion CNC 640 M X = 1120 mm Lrsdpfxexlr Uzj Ad Ajk Y = 510 mm Z = 510 mm Table size: 1460 x 510 mm Table capacity: 800 kg Machine dimensions: L = 3312 x W = 2850 x H = 2760 mm Machine weight: 6100 kg.