Used Burning Cutting Table for sale (26,787)

Condition: excellent (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, Cutting machine CEVISA - CHP-12 MACH-ID 9404 Make: CEVISA Gedpfxoyi Txkj Afnotu Type: CHP-12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2006, condition: excellent (used), Type: Unicut 547 Serial number: 5435 Gjdok Twx Hspfx Afnstu Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 12,000 kg, total height: 3,800 mm, total length: 8,800 mm, total width: 5,900 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, overall weight: 42,000 kg, Table type boring mill Fermat - WFT 13 CNC MACH-ID 9430 Make: Fermat Type: WFT 13 CNC Control: HeidenHain iTNC530 Year: 2015 X - Travel: 3000mm Y - Travel: 2000mm Z - Travel: 1500mm W - Travel: 700mm Table Length: 1800mm Table Width: 1600mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 61kW Ram size: 300 x 300mm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 1-20000mm/min. Feed rate Y-Axis: 1-20000mm/min. Feed rate Z-Axis: 1-20000mm/min. Feed rate W-Axis: 1-20000mm/min. ATC Toolchanger: 30 Gtodpfxjyim I Rs Afneu Number of controlled axis:5 Length: 8800mm Width: 5900mm Height: 3800mm Weight: 42002kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Model - 630 CBM and 353BCS-R 4 station double loader Cutting , grinding, marking and breakout. Tilt function Shape scanner Perimeter fencing for loader Delivery and Installation available. Godpoyc Uq Ijfx Afnetu

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Gtedpfx Ajwb D S Hofnsu Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: ready for operation (used), Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma's Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm Gtsdpfxjygywho Afnou 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Luchttoevoer: 6 bar Afmetingen H x B x L: 1300 x 1300 x 1350 mm Gewicht: 580 kg

Condition: ready for operation (used), controller manufacturer: Siemens Sinumerik 840D, laser power: 2,400 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,750 mm, total length: 8,400 mm, total width: 7,800 mm, empty load weight: 22,500 kg, De machine is nog steeds functioneel en in gebruik. Uitgerust met: - 3 plaatklemmen Gtodpsygyvqofx Afnju - Sheetmaster-lossysteem - GripMaster Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Max cuttingthickness in steel: 8 mm Loading System: yes, SheetMaster

Condition: excellent (used), Year of construction: 2020, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2020 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm Gtedpfeyh U Ubsx Afnju MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Grinding diameter: 400 mm Round magnetic chuck: Ø 400 mm Grinding wheel: 200 x 80 x 78 mm 2 speeds: 20/40 rpm Grinding wheel speed: max. 2850 rpm Max. distance between table and grinding wheel: 280 mm Throat: 315 mm Fine adjustment: 0.01 mm Motor power: 3 kW Dimensions (L x W x H): approx. 700 x 900 x 1800 mm Weight: approx. 550 kg The machine comes from a training workshop and is in very well-maintained condition. Gtsdpfx Afsykkhlonou Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, band length ca. 1.700 mm + 2.700 mm Gtodsv Hgb Nopfx Afnou cutting width max. 2.500 mm Cutting height max. ca. 80 mm

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Gedjv Sfkajpfx Afnstu Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle diameter 125 mm x-travel 3000 mm y-travel 2000 mm z-travel 1500 mm W-axis (spindle longitudinal) 600 mm table-size 1250 x 1600 mm table load capacity - central/maximum 5000 kg Control Heidenhain iTNC 530 tool taper ISO 60 spindle turning speed range 5 - 3000 U/min spindle drive motor 37 kW max. torque on the spindle 1646 Nm transmission ratio 2 Working hours: - Machine on: 59.078 h - Autom. cycle: 24.207 h Gtedpfxsyifnue Afnsu * CNC-control HEIDENHAIN iTNC 530 * Coolant equipment * Table B-axis, 360.000 positions

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg Gjdpfob A Iyaox Afnjtu

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Godpfjyg E Sksx Afnjtu very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm Gtedsyg E Ifopfx Afnju with electrical cabinet AVAILABLE AND READY TO WORK

Condition: good (used), Item: D-2929-Cheese cutting machine Gtedpfx Aeh D H T Hsfneu Cheese dividing / cutting machine, Semi automatic pneumatic type, Stainless steel for cheese block up to 500 mm Please contact us for more information. Many tools for offer!

Condition: as good as new (ex-display), functionality: fully functional, Very nice Polar cutting machine for sale. Polar paper cutting machine for sale. Type 58 E (new model) with digital programs, chrome table, and safety photo cells. Gsdpfx Asykatdofnetu Excellent condition, complete with all standard accessories. This machine has been very well maintained and has seen little production use. You are of course welcome to test this machine at our facility. We can arrange transport/packaging for you and load it onto a truck or container. Ask for a price including transport (location: The Netherlands). Regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2001, overall weight: 10,000 kg, total length: 5,000 mm, total width: 900 mm, total height: 900 mm, Cast iron box table Weight 10 Ton 2 matching pieces availebel Nice surface Number of T slots: 7 Gsdpfx Aoyg Hpwsfnjtu Jump from T to T: 130mm T size: 22mm Number of T-slotted sides:1 Length: 5000mm Width: 900mm Height: 900mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, Tiltable -45/+45°, electronic height and tilt adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital display on spindle moulder fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price €18,700 Gedpfxjykar Hs Afnstu Available approx. September 2026 Transport possible at an additional cost!

Condition: used, Union KCU-130 Table Type Horizontal Boring Machine Year 2001 Condition Used Serial Number 1370022 (2001) X/Y/Z 4000/3000/1500mm Table Size 2000 x 2500 x 20,000kgs Spindle Taper BT50 Heidenhain TNC430 Control, B-axis 360 Deg, 60 Position ATC, Gsdeyb Ag Ispfx Afnstu W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Right Angled Milling Att. Guarding Enclosure

Condition: used, Struers Type: Struers Accutom-5 Struers Accutom-5 Precision Cutting Machine Laboratory saw including accessories & cutting discs Description: For sale is a Struers Accutom-5 precision cutting machine. This is a high-quality laboratory and precision saw designed for accurate sectioning of metals, ceramics, minerals, electronic components, sample materials, and workpieces with minimal deformation and excellent cut quality. Ideal for material testing, metallography, precision engineering, research, workshops, or laboratory use. The machine operates with adjustable speed, feed control, and integrated cooling, enabling precise, clean, and reproducible cuts. Extensive accessories and several original Struers cutting discs are included (see photos). Features: - Precise sectioning of materials and sample specimens - Adjustable cutting speed and feed rate - Minimal material loss due to precision cutting - Automatic or manual cutting operation - Recirculating coolant system to protect the sample and cutting disc - Adjustable cutting force (low / medium / high) - Programmable cutting modes - Very smooth operation and accurate positioning Technical Data: Device: Struers Accutom-5 Precision Cutting Machine Speed: 300 – 3000 rpm Feed: 0.005 – 3.0 mm/s Positioning speed: X/Y each 13 mm/s Cutting force: approx. 20 N / 40 N / 60 N Cutting discs: Diameter: 75 – 152 mm Max thickness: 2 mm Mounting hole: 12.7 mm Max sample size: Clamping length: up to 225 mm Cutting length: up to 30 mm (with Ø 20 mm sample) Coolant tank: approx. 4 liters Noise level: approx. 65 dB(A) Power / Electrical: Mains voltage: 220 – 240 V Frequency: 50 – 60 Hz Power input: approx. 370 W Current consumption: approx. 2.7 – 3 A Fuse: 6.3 A slow-blow Dimensions & Weight: Godjyhpqgspfx Afnotu Width: approx. 510 mm, Depth: approx. 700 mm, Height: approx. 270 mm Weight: approx. 45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery (see photos): - Struers Accutom-5 cutting machine - Several original Struers cutting discs (Diamond / SiC / Al2O3 depending on set) - Sample holder / clamping accessories (see photos) - Documentation / manual / spare parts documents - Integrated coolant tank (Subject to changes and errors in the technical data. All information provided without liability!) We are happy to answer further questions for you by phone.

Condition: new, The HB 250 A is a compact Horizontal Mitre Cutting Bandsaw, designed by KNUTH to efficiently handle a variety of cutting tasks in any workshop. This robust machine features a cast-iron, one-piece saw frame that is ideal for making precise miter cuts. With the operator moving the saw frame instead of the material, it enhances both convenience and accuracy. The hydraulic cylinder allows for infinitely variable support pressure and smooth sawing with optimized cutting through two speeds. The quick-action clamping vise ensures swift setup and secure material handling, making your operations seamless. Equipped with a coolant system, base, one saw blade, and comprehensive operator instructions, the HB 250 A ensures reliable performance in the Industrial Saw category. If you are looking for a reliable and powerful tool, you can request a quote for this Horizontal Mitre Cutting Bandsaw today. Gedpfxou Abugo Afnetu

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Voltage: 400 V Fuse: 25 A Power: 11.0 kW EQUIPMENT Automatic feed system Godpfjygilhjx Afnstu

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 Gtjdou Dw I Eopfx Afneu With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: ready for operation (used), table length 800 mm table width 320 mm groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m². Gtjdpfx Afsumndbonju