Used Broaching for sale (211)

Condition: new, Year of construction: 2025, Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base. Machine description: Durable and stable construction, the bed is made of high quality cast iron. 12-speed gearbox with induction motor provides optimal rolling mode without loss of maximum torque. Induction hardened and precision ground bed guides. Appropriate bed width of 160 mm ensures stable and precise working conditions. Spindle shaft mounted by two angular contact bearings. 38 mm spindle bore for optimal work results, allowing the machining of large diameter shafts. Spindle motor induction (constant speed) 1.1 kW/230V drive with high power and high torque, optimal for machining steel, non-ferrous materials. Handwheel carriage with precise 0.5/0.1 mm scale (transverse/longitudinal feed). The tool slide with a scale, rotates in the range of ± 45°, and the tailstock has a sliding system of ± 10 mm for turning cones. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel to the gears. Hardened and ground wheels toothed in the spindle gearbox. Large threading range (Right and Left hand threading): Metric - (17) 0.5-4mm, Inch - (26) 9-40 TPI. With lead screw for threading or automatic longitudinal feed. Automatic Longitudinal Feed (2) 0.105 - 1.396 mm/rev, and Traverse (2) (0.022-0.296) mm/rev - reduces machining time and improves quality when turning long parts. The machine is fully compliantwith the requirements of EU directives (CE) and Polish regulations and DIN standards. with the requirements of EU directives (CE) and Polish regulations and DIN standards. Technical parameters 3-jaw chuck 160mm Max. turning diameter over bed 330mm Max. turning diameter over carriage 220mm Max. detail length in centers 700mm Max. length of the installed part 650mm Bed width 160mm Spindle bore 38mm Spindle taper MK5 Dimensions of lathe post 75 x 75 x 20mm Top slide range 100 (0.05) mm Traverse range 150 (0.1)mm Longitudinal shift range 620(0.5)mm Spindle speeds (12) 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm /min Number and range of metric threads (17) 0.5-4mm Number and range of inch threads (26) 9-40 TPI Longitudinal autofeed speed 0.105-1.396 mm/rev Auto traverse speeds 0.022-0.296mm/rev Tailstock liner diameter 40mm Trail distance of the tailstock liner 70 (0.025)mm Taper of Tailstock MK2 Engine power 1.1kW / 230V Dimensions L/W/H (with base) 1500 x 730 x 1200mm Weight (with stand) 320 kg Equipment: Lathe base 3-jaw chuck 160 mm Jaws left Fixed Tooth: MK3 Change wheels Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Ijdpfjmtyi Nox Ag Ujht

Condition: new, Year of construction: 2025, This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Iedpfx Agjrh E Sme Ujht Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1500 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power 3.0/4.5 kW Flood coolant pump power 0.1 kW Dimensions 2440×850×1320 mm Net weight 1830 kg

Condition: new, Year of construction: 2025, Industrial metal lathe CORMAK 500x1000YB - solid cast iron bed construction, gearbox with min. speed control from 9 rpm and powerful 7.5 kW/ 400V induction motor - maximum torque. Large spindle passage 85 mm. Machine characteristics The 500 x 1500YB CORMAK universal lathe is a multi-tasking machine, ideal for machining various surfaces, such as internal and external turning, tapers, polishing, metric, inch, modular and DP threading, drilling and broaching. The digital readout works on three axes: longitudinal, transverse and upper slide. The processed signal from the optical rulers displays the movement values ​​on the digital screen, which increases precision and comfort of work. The lathe is equipped with a high-quality spindle bearing system with modern bearing of the main spindle, which improves the stability and durability of work, especially at low rotational speeds. A large 105 mm spindle passage, a 3-jaw 320 mm lathe chuck and a powerful 7.5 kW engine ensure optimal work results, even with demanding tasks at low rotational speeds. The longitudinal and transverse rapid feed system significantly increases productivity and shortens machining time, but due to the slow-speed nature of the machine, operations requiring precise finishes take place in stable and controlled conditions. Hardened and ground gears in the spindle gear ensure the reliability and stability of the machine's operation for many years, which is crucial in operations requiring precise turning at low speeds. Equipped with a lead screw and a feed shaft, the lathe allows threading in various systems (metric, inch, modular, DP) without the need to change change wheels, which allows for quick adaptation to different tasks. Easy adjustment of the spindle speed and automatic feed from the ergonomic control panel provides full control over the machining process, which is crucial for precise, low-speed operations. The ability to turn a wide range of threads, including right-hand and left-hand threads, without the need to change wheels, and a special thread turning clock facilitate precise counting of threads, which saves time on complex tasks. The interchangeable bed bridge allows for the machining of larger components (e.g. discs) and allows the turning of large diameters up to 710 mm when the bridge is removed, which gives a wide range of possibilities in the field of machining large parts. All these features, combined with the slow-speed nature of the machine, make the CORMAK 500 x 1500YB lathe ideal for precise, complex machining operations. Technical data TURNING DIAMETER OVER BED 500 mm with LCD readout TURNING DIAMETER OVER BRIDGE 300 mm TURNING DIAMETER IN BRIDGE RECESS 710 mm TURNING LENGTH IN BRIDGE RECESS 240 mm CENTER HEIGHT 250 mm CENTER DISTANCE 1500 mm BED induction hardened SPINDLE SPEED RANGE (24 ADJUSTMENT STAGES) 9-1600 rpm SPINDLE BORE DIAMETER 105 mm Ijdpfxsvwz Ire Ag Ujht SPINDLE INTERNAL TAPER 90 mm 1:20 FEED RANGE LONGITUDINAL 0.063-2.52 mm CROSS FEED RANGE 0.027-1.07 mm METRIC THREADING RANGE 0.5 - 224 mm INCH THREAD 72-1/8 T/" MODULAR THREAD 0.5 - 112 mm D.P. THREAD 56-1/4 MAX CROSS CARRIAGE DISPLACEMENT 320 mm MAX UPPER SLIDE DISPLACEMENT 145 mm MAX LATHE CHUCK SIZE 25 x 25 mm TAILSTOCK SLEEVE TIP 150 mm MAIN MOTOR POWER S1/S6 7.5/9 kW MAIN ENGINE SPEED 1440 rpm WEIGHT APPROX. 3300 kg

Condition: new, Year of construction: 2025, This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching. This series lathes can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 80 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Isdpfx Ajriczieg Uoht Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Equipped with a foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Technical data Swing over bed 460 mm Swing over cross slide 270 mm Swing over gap bridge 690 mm Turning length in gap bridge 165 mm Centres distance 1500 mm Bed inductively hardened Bed width 300 mm Spindle bore diameter 80 mm Spindle tip D1-8 Spindle mount MK7 Spindle speed (12) 25–1700 rpm Maximum tool dimensions 25×25 mm Longitudinal feed range (42) 0.031–1.7 mm/turn Transverse feed range (42) 0.014 – 0.784 mm/turn Metric thread (41) 0.1–14 mm Inch thread (60) 2–112 T.P.I. Modular thread 0.1–7 M.P (34) D.P. thread 4–112 D.P. (50) Tailstock quill diameter 60 mm Tailstock quill extension 130 mm Tailstock quill tip MK4 Digital readout in 3 axes Main motor power 5.5 kW Flood coolant pump power 0.1 kW Dimensions 2750×1080×1370 mm Net weight 1820 kg

Condition: new, Year of construction: 2025, The CORMAK 660 x 2000 (CJ6266YB/2000) universal lathe is a versatile machine that provides exceptional precision in low-speed turning of various materials. It is ideal for internal and external machining, taper turning, polishing, threading (metric, inch, modular and DP), as well as drilling and broaching. Isdpfx Agevxgc De Uoht The low speed of this lathe makes it an excellent choice for tasks requiring maximum accuracy and stability of work. Solid construction The lathe bed is made of high-quality cast iron, which effectively dampens vibrations, which is crucial for low-speed operation of the machine. Thanks to the hardened and precisely ground bed, the lathe provides exceptional resistance to torsion and vibration, enabling precise turning even at the lowest rotational speeds. Advanced features The central feed switching system, including the lead screw and feed shaft, allows for efficient threading, even at low speeds. The accelerated longitudinal and cross feed can be easily controlled by the joystick, which facilitates precise machining, especially at low speeds. The digital readout in three axes (longitudinal, cross and upper slide) with an on-screen display allows for precise control over every movement of the lathe, especially during slow-speed operations. The high-quality bearing system with ball bearings and the modern bearing of the main spindle ensure stable and safe operation of the lathe. Efficiency and precision Thanks to the large spindle passage (82 mm), center spacing (2000 mm), 3-jaw lathe chuck (315 mm) and a powerful 7.5 kW engine, the CORMAK lathe guarantees high machining efficiency, even at a slow work pace. The rapid longitudinal and transverse feed system significantly shortens the machining time, but also allows for precise execution of details at low speeds. Technical data Turning diameter over bed [mm] 660 Turning diameter over support [mm] 440 Turning diameter in bridge recess [mm] 900 Turning length in bridge recess [mm] 250 Centre spacing [mm] 2000 Induction hardened bed Bed width [mm] 400 Lathe chuck diameter [mm] 315 Spindle passage diameter 82 Spindle nose [mm] D1 - 8 Spindle socket [mm] 113 (1:20) / MT5 Spindle speed range [rpm] 9 - 1600 24 gears Maximum tool dimensions [mm] 25 x 25 Longitudinal feed range [mm/rev] 0.044 - 1.48 Cross feed range [mm/rev] 0.022 - 0.74 Metric thread [mm] 0.45 - 120 Inch thread 7/16 - 80 T.P.I. Modular thread 0.25 - 60 M.P. D.P. thread 7/8 - 160 D.P. Accelerated feed [m/min] longitudinal 4.2 ; transverse 1.9 Tailstock quill diameter [mm] 90 Tailstock quill stroke [mm] 235 Tailstock quill tip MT 5 Main motor power S1/S6 [kW] 7.5/9 Coolant pump power [kW] 0.1 Dimensions (L x W x H) [mm] 3710 x 1135 x 1440 Net weight [kg] 3600

Condition: new, Year of construction: 2025, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev. (42) Iedjvzzqbepfx Ag Usht Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg

Condition: new, Year of construction: 2025, Main advantages: - The CORMAK GOLIAT 660 x 4000 universal lathe can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric, inch modular and DP threading, drilling and broaching. - The solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precisely ground. The device bed is extremely resistant to twisting and does not vibrate, which is the basic condition for precise turning. - Central feed switching system, lead screw and feed shaft for threading - The digital readout works in (3) three axes of movement: longitudinal, transverse, upper slide. The processed electronic signal from the optical rulers visualizes the obtained values ​​from movements along the axes on the digital screen. - The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern main spindle bearing with ball bearings - Optimal work results are ensured by a large spindle passage of 105 mm, a 4000 mm center spacing, a 3-jaw lathe chuck of 320 mm, and a powerful 7.5 kW engine. - The rapid longitudinal and transverse feed system significantly shortens the machining time and increases productivity. - Hardened and ground gears in the spindle gear - ensures long-term stability of work. - Equipped with a lead screw and a feed shaft for threading, automatic longitudinal and transverse feed. - Easy adjustment of the spindle speed and automatic feed from the ergonomic control panel on the gear. - Possibility of machining a wide range of threads without the need to replace the change wheels in the guitar. Wide range of threads: metric (22) 1 - 14 mm, inch (25) 2-28 T.P.I, modular (18) 0.5-7 M.P., D.P. thread (24) 4-56 D.P. Turning right and left threads. Ihjdsvw Abgjpfx Ag Uet - Thread turning clock designed for accurate counting of turns. The function is to save time so that in several passes you can unscrew the lead screw nut to manually quickly return the support to its original position. - The bed has a replaceable bridge for turning larger elements, e.g. a disc. This lathe model allows for machining with a maximum diameter of 870 mm with the bridge removed. Technical data Max. turning diameter over bed Ø660 mm Max. turning diameter over support Ø420 mm Max. turning diameter in bridge slot Ø870 mm Slot length 240 mm Centre spacing 4000 mm Max. turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36-1600 rpm) Number and range of longitudinal feeds 65 (0.063-2.52 mm/rev.) Number and range of cross feeds 65 (0.027-1.07 mm/rev.) Metric thread 22 (1-14mm) Inch thread 25 (28-2 TPI-pitches per inch) Modular thread 18 (0.5-7mm) DP thread 24 (56-4 DP) Rapid longitudinal feed 4.5 m/min. Rapid cross feed 1.9 m/min. Lead screw pitch 12 mm Spindle axis distance from tool surface 28 mm Tool dimension 25x25 mm Max. top slide travel 145 mm Max. cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Max. tailstock quill travel 150 mm Tailstock cross travel ±15 mm Main motor S1/S6 7.5/9 kW / 400V Rapid feed motor 250W Coolant pump 60W, 25 L/min. Dimensions L/W/H 5500 x 1100 x 1450 mm Weight 5 200 kg

Condition: new, Year of construction: 2025, One of our best-selling conventional lathes, this lathe can be used for many tasks such as turning internal and external surfaces as well as tapers, polishing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Ihjdpfxoiz Tf Ss Ag Ujt Centres distance 1000 mm Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power (S1/S6) 2.2/3.3 kW Flood coolant pump power 0.1 kW Dimensions 1940×850×1320 mm Weight 1590 kg Default equipment 200 mm 3-jaw lathe chuck 250 mm 4-jaw lathe chuck 3 axes digital readout Face plate Steady rest Follow rest Spindle reducing sleeve Dead centre Change gears for the swing-frame of the gear train Cooling system Lighting installation Thread indicator (gauge) Lathe equipped with an electromechanical foot brake compliant with EC regulations Chips container Set of handling tools Protective guards compliant with the newest EC regulation User manual EC declaration of conformity Factory new machine under full warranty Factory new machine, under warranty For more information you can visit our web page.

Condition: used, Year of construction: 2001, dimensions of the machine ca. 1450 x 1560 x 2620 mm weight of the machine ca. 1,8 t The machine frame is a solid welded construction. The cooling oil tank is located in the machine bed. The cross table is made of cast iron, guideways are ground and scraped with Ihsdpfjwbi Awjx Ag Ust adjustment strips. The shaper head is also made of cast iron, the guides are ground and scraped, with lubrication grooves. The push head can be swiveled +/- 20 degrees. Stroke adjustable through side opening. Tool is positioned at the longitudinal stop. The machine has a mechanical stroke drive. The control for the CNC dividing head is housed in the control panel. The zero point can be set in any position of the dividing head and with the division options of 2-999 symmetrically and 99 divisions asymmetrically. Machine color: Green Color dividing head: red --> Digital operating instructions available in German + English

Condition: excellent (used), Year of construction: 1991, Slotting machine Elmass, suitable for keyways up to 14mm width. Maximum working stroke 200mm. With this Elmass system, thanks to the bore-guided tool, it is possible to push even extra-long keyways. Tools for standard bores of diameter 6-50mm, slot widths of 2-14mm are available. Iodpfx Ageld S S Sj Uoht This tool system is also suitable for blind holes. Thanks to the 400mm rotary table, multiple keyways can also be cut.

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° Ihodsxq Hgcopfx Ag Ust – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: excellent (used), Keyway broaching machine hydraulic Manufacturer: Polymat 50/400 Keyway width: 3–50 mm Bore diameter: 13–500 mm Maximum broaching length: 400 mm Broaching force: 3 MP Table load capacity: 10 t Cutting speed infinitely variable from 0–20 m/min 11 feeds of 0.01–0.15 mm 380 volt 5.5 kW Accessories: - various broaching tools - enlarged clamping table 700 x 700 mm Isdewxvb Iopfx Ag Usht - jib for setting down the tool guide bar - operating manual - electrical schematic Transport dimensions: L: 1,500 mm W: 1,100 mm H: 2,340 mm Weight: 2,200 kg

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Iedpfjxclfzsx Ag Usht Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: excellent (used), Year of construction: 1974, machine/vehicle number: AKK60945ASK8560, Manufacturer: Frömag Model: KZH 90 x 1500 Year of manufacture: 1974 Machine No.: AKK60945ASK8560 Weight: 1,35 t Technical data: max. tractive force: 7.000kg max. stroke: 1565 mm max. cutting speed: 2-6 m/min (infinitely variable) max. return speed: 2-6 m/min clamping area: 410 x 610 mm passage width: 0 open table groove width: 3 - 100 mm in bores from: Ø13 - 500 mm depth of machine base under floor: 2500mm footprint (l x w x h): approx. 800 x 1.100 x 1.100 mm power supply: 380V / 50Hz / 4,73kW Accessories: Dividing head-TA Twist groove drawing device for the production of twist grooves Serrations internal splines div. tools for the production of internal splines and grooves Remark: Optional: machine can also be used for profile broaching. Ihedpfx Aslp Im Hsg Uot

Condition: used, Year of construction: 1966, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Iodpfx Aocm Elneg Usht

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation Isdpfx Agsx U Tr As Usht *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: excellent (used), Stroke: 320mm Table dimensions: 630mm Isdpfxjx Tpz Do Ag Ujht

Year of construction: 1997, condition: excellent (used), Universal Turning key drawing machine from Cardinal apply for toolmaker , mold maker, education and Locksmith Slot width 3 - 100 mm max. groove length 1250 mm Pulling force 6000 kg Draw length 1250mm Motor 5,5 KW Weight 1650 kg Dimensions 1000x1650x1000mm Iedpfx Asin Dkzog Uoht

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, AC motors for spindle speed and feed Chip conveyor No. 2 polygon milling/thread milling devices No. 1 broaching unit Isdpfexyghfex Ag Ueht No. 1 threading unit No. 1 pick-up with retraction slide No. 1 deburring unit No. 1 rack milling device No. 2 wedge recesses No. 2 marking devices No. 1 carriage on 6th radial CNC axis (Siemens), with X and Z No. 2 sensors for length control of short, non-threaded or first of bar piece, with automatic discharge into bin at 4th and 8th station Giovanni Cucchi integrated bar feeder No. 1 bar elevator Tool holders

Year of construction: 1985, condition: used, 32 mm Ihodpswkvthofx Ag Ujt 12 mm stroke 330 mm pulling capacity 3,0 t total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition.

Condition: new, weight max. in kg 5000 kg connected load frequency 230 V weight 12 kg dimensions 700 x 300 x 300 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. Ihjdpfsupxr Ijx Ag Uet

Condition: good (used), Year of construction: 1998, Multi-spindle lathe with 6 spindles Ihodpfx Agjw Navpe Uot Devices for: - Thread cutting - Polygonal turning - Broaching, slotting, chasing Gripping device Many accessories (curves, slides, collets,...) IEMCA bar loader SIR 32/33 F Max. bar length 3,300 mm

Condition: good (used), Year of construction: 1995, Multi-spindle lathe with 6 spindles Devices for: - Thread cutting - Polygonal turning - Broaching, slotting, chasing Gripping device Many accessories (curves, slides, collets,...) IEMCA bar loader SIR 32/33 F Max. bar length 3,300 mm Iedpfew Nauljx Ag Ujht

Condition: used, slot-milling length 300 mm groove width 34 mm flute depth mm cutting speed 6 m/min return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg dimensions of the machine ca. 590 x 1150 mm Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Isdjd Ih Uiopfx Ag Usht Electromagnetic Brake with various accesssories (see pictures)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, power: 450 kW (611.83 HP), workpiece diameter (max.): 21 mm, total length: 30,000 mm, ROLLING MILL - 2 rolling pass - power 450 KW - raw material: wire road low carbon dimensions from fi 5.00 to fi 21.00 mm - capacity depending on the size of 1200 kg/h - finished products: flat bars from 8x2 to 30x3 mm round bars from fi 5 to fi 16 mm square bars from 5x5 to 14x14 mm triangle bars from 10x10 to 20x20 mm Iedpfx Aox I Nbmeg Usht angle bars from 10x10x2 to 20x20x3 mm equal angle bars from 15x10x2 to 20x12x4 mm If you have additional questions or need more information, feel free to send us a message or call us.