Used Briqueting Press for sale (12,207)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition! Dedpfx Abez Rn Sfs Aokw

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC Dodpfx Abonxkrbe Askw BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 930+1000+2400 (filter) mm Capacity: ~60 kg/h Power supply: 380V Motor power: 5.5 kW Safety switch Option to purchase the filter separately Filter dimensions: Connection diameter: 1000 mm Width: 1700 mm Height: 2400 mm Overall dimensions: Length: 1600 mm Dkodezd Erdepfx Ab Ajw Width: 1200 mm Height: 1500+1000+2400 mm

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Dsdpfx Abe E Dqus Ajkw Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Dkedexfwdjpfx Ab Aow Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW Dkjdpfxjqd Uy Ao Ab Asw

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional Dkedpfe Aacybjx Ab Aow - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Dkedpfoz S Utlex Ab Aow Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Dkodpfeffh Atex Ab Aew Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material Djdozb N T Uepfx Ab Aekw With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request Dsdpfx Aoz U U Dpsb Aekw - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system Dkedpfxezw Dbke Ab Ajw – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, Dedpfx Abod Nm Sio Aekw * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, briquette diameter: 50 mm, overall weight: 340 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 60 l, pressing force: 8 t, operating pressure: 270 bar, Equipment: cooling unit, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 20-30 kg/hour. The raw material hopper is 50 liter. The machine has an oil cooler for the continous work. Dkjdjf Hmi Eopfx Ab Asw

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Dkjdpfx Abjz It Dmo Aow Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Technical data: Motor output power 100% ED 11 kW Dksdpfx Asvrvfnsb Ajw Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm Dksdpfxsz Sqiis Ab Ajw • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 5000 Kn

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Dodpfxszy U Uye Ab Aekw Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm Dodez Sqf Rjpfx Ab Ajkw • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Dkedszxcldjpfx Ab Aow Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1200x1500mm - Weight: approx. 650kg ADVANTAGES Djdpfx Aszwwxcjb Aokw - Made in Italy - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2011, stroke length: 280 mm, total width: 2,850 mm, total height: 4,800 mm, overall weight: 68,000 kg, product length (max.): 3,550 mm, Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details. • Press capacity: 400 ton • Rated tonnage point above B.D.C.: 7 mm • Strokes per minute: 35 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2600 x 1100 mm • Bolster area (L x W): 2700 x 1200 mm • Bolster thickness: 230 mm • Working height: 1200 mm • Side opening: 1100 x 700 mm • Main motor: AC 37 kW x 4 / VS 45 kW x 4 Dksdez Stfyspfx Ab Asw • Slide adjustment motor: 2.2 kW x 4 • Required air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 4000 Kn

Condition: new, Year of construction: 2026, Orma NPC/DIGIT 31/16 2V - Exhibition model - available for immediate delivery Dedpfe Afau Hex Ab Aokw Drilled solid steel plates 3100 x 1600 mm No. 1 intermediate plate, No. 2 working table Movable lower plate No. 8 hydraulic cylinder, diameter 85 mm Cylinder stroke and press opening 450 mm Total pressing force 160 t Digital control system 45 kW electric boiler for thermal oil heating Electric shut-off for a pair of cylinders Misalignment protection PRICE LIST 2026 € 72,250.00 Location: ex works - available for immediate, short-term delivery - Subject to prior sale

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_202500018, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Dkjdo Ad Adhopfx Ab Aow Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: excellent (used), Eccentric press Inventory no. 3983 Manufacturer: Ter Hart Type: EP 25 * Pressing force: 25 tons Djds Advvqjpfx Ab Ajkw * Stroke adjustment: 6 - 60 mm * Adjustable ram stroke: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg * With safety guard