Used Brikett Press for sale (12,416)

Condition: good (used), Hand-operated spindle press, homemade, from a training center Pressing force: approx. 5-10 tons Siegfried Volz Machine Tools Iedpfezcqmlex Aa Ioth Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Itedpfozcpv Sjx Aa Ieh Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Isdpfozbxwiex Aa Ijth • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Itsdjzbxvlopfx Aa Ijh Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Itedpoza U Twsfx Aa Ieh Type AD S 30135 Capacity: 3050 x 135 tons Cybelec ModEva 15T CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Amada / Euro clamping Includes a set of tooling

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Type PR 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Hydraulic upper and lower clamping Hydraulic CNC crowning Itedpoza U Nrefx Aa Ioh Includes a set of tools

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Iodozdpctepfx Aa Ieth Video of machine in operation available on request.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Bale press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-wire, manually Throughput at a bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: Itsdozc Hz Eepfx Aa Ish The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or our YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Itedpfxszc Hy Us Aa Ieh Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Isdpfx Aasza T Dbe Ieth Includes a set of tools

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms Itjdpezdvcajfx Aa Ioh safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), JDS hydraulic press Bed: 505 x 510 mm Dimensions: 140x140x285 cm LxWxH Iedpeiki Ahjfx Aa Ieth

Year of construction: 1992, condition: good (used), H Bret press Itedpfxsiuc Nwe Aa Ijh Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Turn over to pressbrake possible!

Condition: used, 1x bending knife from a VOEST press brake Isdszcgh Espfx Aa Ioth Length: 4050 mm Weight: approx. 115 kg For further dimensions see pictures

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), stroke length: 200 mm, Hydraulic press brake Manufacturer: AMADA, Type: HFP 50-20 Year of manufacture: 2006 Technical data Manufacturer: AMADA Type: HFP 50-20 Year of manufacture: 2006 Usable length: 2090 mm Capacity: 50 t Distance between uprights: 1,665 mm Stroke: 200 mm Overhang: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: 4.7 t Equipment • Controlled axes: X, R, Z1, Z2 • FIESSLER light curtain at the front • Amada upper tool clamping system • CNC control 3D AMNC graphic • Rear protective device (swiveling grating doors) • Swiveling control panel – front left • Technical documentation • Tools: o Upper tool, straight, 28°, length 2,050 mm, sectional o Upper tool, slightly bent, R1, H 100 mm, L = 2,100 mm, sectional o Lower tool V25/30°, length 2,050 mm o Lower tool, pressure pad, length 2,050 mm o Lower tool, 4-way block die, L = 1,800 mm, sectional All information is subject to change without notice. Itodpfx Aozdtrxoa Ish A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 540029, Heidelberg Speedmaster 70 x 100 cm - 4 colors - Format: 70 x 100 cm - Approximately 400 million impressions - Serial number: 540029 - CP Tronic - CPC 1.04 - Alcolor dampening system - Autoplate - Preset - Cocking Itsdpfxjzd R Hyj Aa Ijh - Fully automatic washing systems - 2/2 reversal (perfector) - Decurler - Powder spray unit

Condition: good (used), Year of construction: 1998, functionality: fully functional, Manufacturer: Heidelberg Model: Speedmaster 102-8-P Year of manufacture: 1998 Prints: 359 million Equipment: - CP Tronic control console - CPC 1-04 color control system - Alcolor dampening system - Autoplate plate changing system Isdpfx Aezd R Hgoa Ijth Additional features: - Automatic blanket washing system - Autoregister - Electronic double sheet detection - Electronic side guide control - High-pile delivery - Sheet de-curler - Anti-static system - Steel sheets in the feeder and delivery - Super Blue configuration - Technotrans cooling and circulation system - Weko powder spraying device Maximum format: 720 × 1,020 mm Machine type: Sheetfed offset printing press Machine model: 8-color perfecting press

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm Itsdpju A Dgrsfx Aa Ieh CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2012, functionality: fully functional, Strautmann bale press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connected power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Itsdezcuz Tepfx Aa Ijh Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 73332117063, functionality: fully functional, pressing force: 175 t, stroke length: 265 mm, total length: 4,100 mm, total width: 1,800 mm, total height: 2,900 mm, overall weight: 12,000 kg, controller manufacturer: DURMAZLAR, controller model: DT-15, working length: 3,050 mm, DURMAZLAR AD-R 30175 CNC Press Brake - Weight of upper tools: 11 kg - Weight of lower tools: 16 kg - Includes tool cabinet from the manufacturer APFEL Iodjzdzmdjpfx Aa Isth - Contents include various press brake tools such as punches, dies, and other bending tools - Also includes another workshop drawer cabinet from the manufacturer SSI SCHÄFER, also with contents suitable for the machine. Note: The item must be picked up between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen – loaded onto a truck.

Condition: refurbished (used), MAE Hydraulic Press 25 Ton Details Itjdszd Shfepfx Aa Ish Manufacturer: MAE. Type: HY-S25. Condition: Refurbished. Specifications Press force: 25 tons Frame type: C-frame Drive: Hydraulic Stroke: approx. 400 mm Table surface: approx. 800 × 500 mm Motor power: approx. 5.5 kW Hydraulic tank capacity: approx. 140 liters Operation: Two-hand operation. Dimensions Length: approx. 950 mm. Width: approx. 1700 mm. Height: approx. 2900 mm. Weight: approx. 4000 kg.

Condition: used, Year of construction: 2006, Fully functional Itodpfxjzd Tnas Aa Ieh

Condition: used, Year of construction: 2006, Fully functional Itedszd Tm Nspfx Aa Ioh

Condition: used, Year of construction: 2011, Fully functional Itjdpfjzd Tlrjx Aa Ieh

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Iodpfxoyym Hks Aa Ijth Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm