Used Bottle Filler for sale (1,855)

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data Line type: Returnable glass bottling line Application: Beverage filling in returnable glass bottles Formats: 0.33 L and 0.75 L glass bottles Packaging: Bottles in crates Filler capacity: 18,000 bottles/hour Premix capacity: 22,000 L/hour Closure type: Plastic screw caps Labelling: Wet glue labelling, 2 aggregates Main machine years: 1996 – 2016 Dismantling planned: February 2027 Scope of Delivery Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 Crate Decapper | RINK | KM 690/4K | 2012 Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 Empty Bottle Inspector | Krones | Linatronic | 2014 Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 Labelling Machine | Krones | Universella | 2012 Closure Inspection | Syscona | Expert FHK | 2016 Inspection System | Krones | Checkmat 731 | 2012 Crate Packer | Kettner | 1996 Crate Inspection | Krones | Checkmat 708 | 2011 Palletizer | Matec | Rotomat 3B | 2002 Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000 Ncjdpfeza Tx Ssx Aiysu

Year of construction: 2017, condition: used, Bottle crushing plant (FZA) “Solo Spezial” with manual feeding and integrated noise protection boxfor cullet container. Bottles sorted out by the inspector can be fed continuously into the machine via a conveyor. Additional title: Glass shredder Capacity: 1500 bo/h Entry height from the ground approx.: 1790 mm Sound power level: 103 dB Emission sound pressure level ≤ 84 dB Power: 3 kW Voltage: 240 / 420 V Frequency: 50 Hz Length: 2690 mm Width: 1715 mm Height: 1730 mm Weight: 1130 kg Formats: bottles up to 0.75 l Material: Stainless steel housing Position: Free-standing on feet Base construction: Enclosed machine with noise protection Features: Motor for shredder drive, control box, integrated noise protection box for shard container, shredding unit Nedsyr Idgjpfx Aiyjcu

Condition: used, Bottling line for approx. 5000 bottles/h Ncjdpfszgcuhex Aiysu Additional title: returnable glass bottle filling, years of construction 1990 - 2016 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Position: free standing Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank

Year of construction: 2000, condition: ready for operation (used), A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible. Nedpfezg Iquox Aiyocu

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Ncsdpfxjzg In To Aiyeu

Condition: used, Year of construction: 2004, OVERVIEW This Krones KES-2-4-312/25-110 bottle washing machine is designed for the industrial washing of returnable glass bottles in beverage production lines. The machine is equipped with 25 bottles per row and has a rated capacity of up to approx. 28,000 bottles per hour. The machine can process bottle formats from 300 ml up to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink producers and other returnable bottle operations. The washing machine is mainly built in stainless steel, with an insulated stainless steel caustic bath and steam heating system. The machine will be delivered completely reconditioned. The reconditioning scope includes the bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel. A test run is also included. The machine is offered with Siemens S7 PLC control and is available as a reconditioned machine at a special price. TECHNICAL DATA Manufacturer: Krones Type: KES-2-4-312/25-110 Machine Type: Bottle washing machine Year of Manufacture: 2004  Capacity: approx. 28,000 bottles/hour  Bottle Rows: 25 bottles per row Bottle Formats: approx. 300 ml up to 1,000 ml Control System: Siemens S7 PLC Heating System: Steam heating Construction: Mainly stainless steel, insulated stainless steel caustic bath Bottle Cell Pitch: 110 mm Machine Cell Material: Polypropylene Bottles per Carrier: 25 pcs Total Bottle Carriers: 274 pcs Minimum Control Range: approx. 12,000 bottles/hour Maximum Control Range: approx. 35,000 bottles/hour Electrical Supply: 400 / 230 V, 3-phase, 50 Hz Control Voltage: 24 V DC Empty Weight: approx. 45,000 kg Operating Weight: approx. 87,000 kg Machine Length: approx. 11,766 mm Machine Width without Attachments: approx. 3,136 mm Machine Height without Floor Clearance: approx. 3,200 mm Water Consumption in Operation: approx. 6.38 m³/h Water Consumption per Bottle: approx. 0.22 l Main Chain: approx. 4 years old, will be reconditioned Reconditioning Scope: Bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel Test Run incl. Delivery Terms: EXW, unpacked Ncedpsy Ul N Hofx Aiyou

Condition: used, Year of construction: 2009, operating hours: 4,047 h, machine/vehicle number: LC589, Technical Specifications & Performance Data This used complete bottling line is configured for aseptic carton packaging in the Tetra Pak Prisma 0.33L format. Engineered around proven Tetra Pak components, it provides a compact, reliable solution for high-quality industrial packaging and beverage production. The line configuration integrates filling, capping, and packing functions with smooth container handling for stable operation and consistent output. Nsdpfx Aezfzinoiyocu Production speed: 7500 pieces/hour Format: 0.33L Prisma (square) Container type: Carton (Tetra Pak Prisma) Line configuration: TBA19 (Filler) + TCA45 (Capper) + TCBP70 (Packer) Filler model: TBA19 Capper model: TCA45 Packer model: TCBP70 Operating mode: Aseptic packaging line for shelf-stable beverages Manufacturer: Tetra Pak Advanced Automation & Control Systems The line benefits from Tetra Pak engineering with integrated automation that supports stable aseptic operation. Centralized controls coordinate filler, capper, and packer modules for synchronized throughput, precise timing, and reduced downtimes. Recipe-based settings enable consistent setup for the Prisma 0.33L format, and operator-friendly HMI interfaces facilitate monitoring, diagnostics, and quick adjustments during production. Production Line Integration Capabilities Designed for seamless integration into a complete production environment, this used bottling line supports upstream and downstream connections such as infeed handling, carton supply, and end-of-line palletizing. The Prisma 0.33L format is standard in the configuration, ensuring reliable format handling and efficient changeover within the same format family. The conveyor logic and module interfaces help maintain continuous flow and balanced line performance in second hand industrial packaging applications. Machine Condition & Maintenance History This second hand line is offered in working condition and ready for operation, with original model identification on the equipment. Tetra Pak’s serviceable design supports routine maintenance, with wear components and aseptic-critical parts accessible for inspection and replacement following standard preventive maintenance practices. The line is suitable for facilities aiming to expand or standardize aseptic beverage production without significant commissioning delays. Operational Performance & Versatility Optimized for aseptic processing, the system provides controlled handling from filling to cap application and packing. The TBA19 ensures accurate fill under aseptic conditions; the TCA45 applies compatible closures for Prisma cartons; and the TCBP70 organizes secondary packaging for efficient logistics. The result is a robust solution for industrial packaging where product protection, shelf life, and consistent presentation are essential. Installation Requirements & Site Preparation The line is intended for installation in a hygienic production area with controlled environmental conditions suitable for aseptic operations. Site preparation should include adequate floor space for the filler, capper, and packer modules with service access, utilities routing, and safe o...

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Ncjdpfsy Ucy Nox Aiyou

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Nodpfoy Ucyvex Aiyocu

Condition: good (used), Ward Bekker Auger Filler Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph Ncedpfx Aioy Ax Rgjysu

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Nedpeyhbdlofx Aiyocu

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesThis second hand packaging machinery set integrates smoothly as a turnkey used bottling line. Infeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still... Njdpfxozd Ucxo Aiyocu

Condition: used, Year of construction: 2020, Overview This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time.  Technical data Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) Application: Bottle filling Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes Bottle diameter: approx. 55 – 90 mm Adjustment: Stepless adjustment of bottle diameter and height Ncsdoy Ttzuspfx Aiyeu

Year of construction: 2021, condition: like new (used), functionality: fully functional, This is a 6-head counter pressure filler. Capacity approx. 600 bottles per hour. Includes a pressure tank for approx. 600 liters. The filler has only been used a few times and must be sold due to circumstances. The filler is in excellent condition. Made for 33 and 75 cl bottles. Ncedsyzb Tbopfx Aiyju

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPHTechnical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation.Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025Manufacturer: SIGModel: HMR - 7478Rated Speed: 26,500 BPHFill Volumes: 65 ml, 125 ml, 200 mlSterilization: H2O2 system (SIG COMBI 2024)System Compatibility: SIG-2 Combibloc 1224 filler platformUpgrades: Filler speed-up conversion kit (SIG-2 2025)Formats: Compatible with 0.065L, 0.125L, 0.2L package sizesAdvanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production.Production Line Integration Capabilities Nsdpfx Aiozdipujyecu Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts.Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents as a professional-grade asset, available for sale after June 2026, for facilities seeking dependable performance without compromising aseptic protocols.Operational Performance & Versatility Optimized for small-format portion packs, the HMR - 7478 delivers precise volumetric control and stable filling quality at elevated speeds of 26,500 BPH. The aseptic design with 2024-standard H2O2 sterilization supports sensitive beverage categories where extended shelf life and strict hygiene are essen...

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Nedexqmqzjpfx Aiyocu

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total length: 172 mm, total width: 229 mm, total height: 391 mm, type of input current: AC, input voltage: 220 V, warranty duration: 24 months, DGUV certified until: 06/2028, ambient temperature (min.): 15 °C, Edhard pastry filling machine series P Model: Edhard filler P 4020 Pastry filler for automatic filling Dosing amount via digital control panel 5.5 liter funnel with spout Table-top unit With this filling and dosing system, masses are directly into 2 pieces of pastry dosed via two 57mm long, 7mm thick filling tips. The plastic funnel holds 5.5 liters. The motor base triggers every time the switch is pressed. Exactly the set amount up to max. 800g injected Connection 220V, 44 watts Dimensions: 172 x 391 x 229 mm, DxHxW NEW device Ncjdpfx Aefxk Txsiyou with 12 months warranty Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: used, Year of construction: 1999, Cone Ice Cream Filler — Machine Description This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products. Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste. Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflows and can be paired with complementary packaging equipment such as automated cone stackers, cooling tunnels, or wrappers. Key Features - Automatic cone handling — accepts cones from feeding system and indexes them into fill position - Accurate, low-shear dosing — fills each cone consistently while preserving ice cream texture - Adjustable fill depth & speed — easily adapts to different cone sizes and product types - Food-grade stainless construction — designed for hygiene, cleanability, and long service life - Modular integration — compatible with upstream and downstream automation - User-friendly controls — intuitive interface for quick changeovers and production adjustment This cone ice cream filler is ideal for manufacturers seeking reliable performance, high throughput, and consistent portion accuracy in commercial production of cone-style frozen desserts. Ncjdpfjynr Dvjx Aiyju Outlet Capacity : 4000 pcs per hour Filling: Main filler Granular: Available Sirup Filler: Available Paper top applicator: Available Drop off conveyor: Available Condition: Good Available: Immediately

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Semi-automatic isobaric filling system for carbonated beverages (beer, cider, kombucha). It has a total of 18 stations and processes 6 bottles simultaneously. Production capacity up to 700 bottles/hour (0.5L). Equipped with an integrated vacuum pump for pre-evacuation of oxygen, automatic filling stop, and adjustable speed (1.0–1.7 L/min). Operating pressure up to 3 bar. Professional equipment ideal for craft breweries. Njdpfezfwckox Aiyecu Can be sold with a tank, small reservoir, hydraulic pump, and loading unit (sold separately, not included in the price).

Condition: used, Used bottling line Cortellazzi for CSD in PET bottles – 8000 bph Ncjdpfx Aiswukuzeyju General overview of the line The used Cortellazzi bottling line for carbonated soft drinks in PET bottles 8000 bph delivers an integrated solution for producing soft drinks and sparkling water in 0.50 L and 1.5 L containers. Specifically designed for industrial environments, the system provides a complete technical configuration. It maximizes production efficiency and ensures operational safety by including protection devices and quality control systems at every stage. Moreover, the layout supports continuous operation with minimal downtime. Filling unit and blow molders The Cortellazzi Fintec VEGA 40.70.10 isobaric filling monoblock 1998 handles carbonated products while maintaining constant pressure during the filling process. As a result, the system preserves CO2 content and prevents product loss. Two separate blow molding machines feed the containers. A Sidel SBO8 from 1999 ensures continuous high efficiency production, while a Kosme KSB-4000 from 1998 serves as a backup or support unit. In addition, both machines allow quick format changes and stable operation under load. Carbonator and CO2 management The Cortellazzi Kristal Mix 1998 controls carbonation and saturates the product with CO2. Consequently, the unit ensures consistency and stability throughout the filling phase. Notably, it also supports fine tuning of pressure and temperature parameters. Labeling and customization Three labeling systems carry out specific functions. The Kosme Ekstrahotmelt 12TS1E1 1998 applies labels using hot melt glue. Meanwhile, the KHS Carmichael 1995 handles traditional label application. Furthermore, the Esleeve ESM 3200M 2004 applies shrink sleeves to PET containers in various formats. Together, these machines offer flexible labeling solutions for different product lines. Quality control and heat tunnel The Krones Miho module 2008 inspects containers and labels, detecting any defects or irregularities. If necessary, the system can reject non compliant items without interrupting the production flow. Then, the Krones Shrinkmatt 3000 tunnel 2008 uses steam to shrink the sleeves uniformly onto the containers. In particular, this tunnel guarantees even heat distribution, preventing sleeve distortion. Secondary packaging The Dimac Bluestar F30 2007 wraps products into shrink film with speed and precision. As such, this unit optimizes grouping and prepares the packs for palletizing. Additionally, it minimizes material waste and ensures a clean wrap. Handle and cap application The Twin Pack MGE 1997 applies handles to the grouped bottles. Simultaneously, the Bortolin Kemo 1997 feeds caps consistently and ensures uninterrupted sealing of containers. This way, the two systems maintain rhythm and alignment on the line. End of line and automation The Keber Meg Arm palletizer 1998 arranges the finished packs onto pallets.

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 10,000 bottles per hour Formats: 1,0 l PET bottles 0,5 l PET bottles 0,33 l PET bottles Working direction: Clockwise Rinsing system: 36 rinsing nozzles 2 channel rinser With stainless steel pipes Filling system: Isobaric system 36 filling valves Capping system Manufacturer: Arol 9 capping heads With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps Dimension Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Rinser, filler, capper in triblock construction Vacuum barrier system Stainless steel CIP cups Cap feeding system Nsdswiy Tvspfx Aiyocu

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Nodpev Aag Dofx Aiyjcu

Condition: used, Year of construction: 2008, Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | - Ncjdpsvzymhjfx Aiyou

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Nedjvrfivspfx Aiyecu

Condition: used, Year of construction: 2005, Overview  This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data  Manufacturer: Officine Pesce S.n.c. Model: PG 97/M4 Year: 2005 Voltage: 220V Frequency: 50Hz Filling system: Semi-automatic Components: Accumulation tank Filling tap Electromechanical valve Bottle-holding plates Capping unit Control panel Pedal-operated mechanism Ncedjwbanqjpfx Aiysu