Cartoner All-in blisters and bottles

HPM ZHJ-150

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Bwsdpfszkbirex Aa Ieu Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, Bwsdpfxoq R Tnzo Aa Iju 16 station ATC, swarf auger.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AM00222090802-01-03, - Function: Heat sealing of blister boxes - Main material of the machine: Stainless steel 304, aluminum alloy Bwjdpfx Aaepfcy Ej Isu - Dimension: 1000mm x 715mm x 450mm - Weight: About 150 kg (excluding mould) - Power supply: 220 V 50 / 60 Hz single phase 3,5 KW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packing depth: Deepest 100mm - Production speed: Up to 12 cycles per minute depending on operator skill - Heat seal pressure: 300-1500kg adjustable Autovak is an international company with research, development and manufacturing facilities in Suzhou, China, and sales and service offices in the United States, Germany and Malaysia. The company has over 20 years of experience in the packaging of medical devices. From doing OEM for European packaging machine manufacturers to produce self-designed machinery and equipment with independent intellectual property rights and own brands, Autovak has accumulated a lot of know-how in the field of medical device packaging and online printing.

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Bedofg Eqwopfx Aa Ijwu Automatic filling: Available Automatic dosing: Available Lid: Pneumatic piston Programmable: Yes with PLC Liquid level control: Available ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Bodpfx Aasyv H Hij Iewu

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Bjdpfx Aoyiflgja Iowu

Year of construction: 2018, condition: ready for operation (used), Max. output: 1400 bottle/h, PET can lid format set: 100/127mm, can diameter: 147.4/182mm, pitch diameter: 530, operational hours counter: ca. 500h, with documentation. Bwedsi A Iykspfx Aa Iou

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. Bedpfxoq H H Rue Aa Ijwu a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: refurbished (used), FREWITT MF 8 Granulator / Oscillating Mill This granulator with adjustable sieve/support tray device (thereby preventing excessive sieve and rotor wear) can be used universally for dry granulation, sieving, crushing, wet granulation, etc. with a capacity of 2,000 kg/hour depending on the product properties. Infinitely adjustable gear motor (43-248 oscillations/min) Opening of the granulating chamber: 380 x 490 mm Active sieve area: 775 cm² Outlet height above floor: approx. 100 cm Drive motor: 2.2 kW Bwodpfx Aoxvzf Dea Iju Manufacturer: Frewitt Year of construction: 2002 Floor Space: 110 x 120 x 190 cm

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bwedpfx Aaev Nkvco Iju