Used Bevelling for sale (523)

Condition: new, Year of construction: 2003, functionality: fully functional, overall weight: 1,760 kg, total length: 2,400 mm, total width: 780 mm, total height: 810 mm, gear ratio: 16, torque: 37,700 Nm, shaft diameter: 90 mm, hollow shaft diameter: 170 mm, 1 unused industrial slip-on bevel-helical gear for conveyor belt drives. Manufacturer: Flender Penig Type: 14LA0-355x16 el380t TGL37088 Rated power: P = 257 kW Torque: 37,700 Nm Ratio: i = 16 (15.8351) Speed n1: 1,000 rpm Speed n2: 62.5 rpm Gisdpfx Aowmlduecwer Input shaft diameter: 90 mm x 170 mm Output shaft: Hollow shaft Ø170 mm 0 = Shaft end right 355 = Size 16 = Ratio e = Anti-reverse device (input shaft rotation right) l = Fan 380 = Pump and fan voltage in volts t: 2 TPM resistance thermometer temperature monitors Hydraulic pump: 1.5 kW Fan: 0.75 kW Dimensions: Length with fan: 2400 mm Width: 780 mm Height: 810 mm Weight with fan: 1760 kg The 14 LA series bevel helical gear units are three-stage gear units with hardened gears and welded housings. The shafts are mounted in roller bearings. The low-speed shaft is designed as a hollow shaft. The torque is transmitted from the hollow shaft to the connecting shaft via cones and keyways. The gear units can be operated in both directions of rotation. The gear units can be mounted on the right or left side without any modification to the gearbox.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, overall weight: 750 kg, total length: 1,275 mm, total width: 560 mm, total height: 745 mm, gear ratio: 160, torque: 14,560 Nm, shaft diameter: 125 mm, 1 unit industrial bevel-helical gearbox from Manufacturer: Penig DDR TGL: 21815 Type: 10LA1-224/315 Condition: from stock clearance (likely never used) Maximum continuous torque: 14,560 Nm Giedpfx Aoxtxphscwor Gear ratio: i = 160 : 1 Exact gear ratio: Efficiency: 97% Transmittable power at: 1400 rpm-(8.7 rpm) = 13.5 kW 950 rpm-(5.9 rpm) = 9.0 kW 710 rpm-(4.4 rpm) = 6.8 kW Oil fill: 85 kg Weight: 750 kg Shaft diameter d1: 35 mm Shaft diameter d2: 125 mm Shaft height h1: 400 mm Overall height h2: 745 mm Length: 1275 mm Width: 560 mm (without shaft) Large shaft couplings also available!

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Giedpsrvg N Djfx Acwjr Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Year of construction: 2016, condition: new, 1 piece unused industrial bevel helical gearbox in original packaging Manufacturer: Flender Type: B3SH size: 17 Type: F Maximum torque: 130.000 Nm Gear ratio: i= 25.409 max. power: 800 kW oil filling: 290 liters speed: n1= 1500 1/min Speed: n2= 59.03 1/min weight: 5450 Kg Shaft diameter d1: 1 x 110mm Shaft diameter d2: 2 x 250mm Shaft height h1: 550 mm Gijdpfsmczixsx Acwor total height h2: 1290mm Length from base: 1740mm width without shafts: 690mm width with 2x shaft: 1650 mm Gearbox has oil circulation lubrication Ø50mm backstop, thermometer, 2x heating element 1800 Watt / 230Volt Dimension of the shipping box length: 2790mm width: 1950mm Height: 1930mm Weight with packing: 6.099kg

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. Gjdpsd St R Sjfx Acwsir The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: reconditioned (used), Year of construction: 2001, DOUBLE lignum angle beveller OMG TR 2 Gijdjlhr Ezspfx Acwer DOUBLE lignum angle beveller Double angle beveller lignum Invincibile ok super 350 mm Used 2001 To do: Double sided lignum beveller Model: Invincible around super 350mm Description: DOUBLE miter saw, double miter saw, 2 x 350 mm miter saw blades, sliding, rated power 21 amps, 50 Hz, 3-phase rotation on the blades 3000 l/min. Year of manufacture 2001. Very good condition Year: 2001

Condition: ready for operation (used), CAPE BRAND EPAL BEVELING MACHINE WORKING. MAXIMUM SIZE 2500mm Gjdpfx Aek Nf S Uocwsir

Condition: excellent (used), max diameter of machined parts: 140 mm min diameter of machined parts: 40 mm Gsdpfxjw Twkrj Acwsir 2-knife cutterhead any length of machined parts motor: 2.2 kW extraction port diameter: 120 mm dimensions (L/W/H): 950x520x1100 mm weight: 95 kg

Condition: used, Year of construction: 2006, Glass edging and grinding machine Gijdpsxvcq Iefx Acwor

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6119, We sell a used CEVISA beveling machine CHP-60G, MFG 2024, SN: 6119 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimetres, maximum consumption of the machine: max. 15A. Gsdpfov Ed N Iox Acweir Electric box with: thermomagnetic switch trip +emergency stop button net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 39280 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 42.840 Euro + VAT, negotiable , FCA Oradea/Romania Gisdpfx Aov Ef Ryocwjr Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator - 2 machines Max gear diameter: 800 mm Max module: 16 Max gear ring width: 125 mm Number of teeth: 5-150 Spindle speed range: 20-125 rpm Main motor power: 7.5 kW Overall dimensions (LxWxH): 3170x2180x2200 mm Weight: 15 t SARATOV 5C276 Straight Bevel Gear Generators Giodpfsum Ez Rex Acwsr Module (mm): 10 Max. gear wheel diameter: 500 mm Max. bevel gear cone distance: 250 mm Max. gear ring width: 80 mm Min. angle of dividing cone (pitch): 5 degrees Number of gear teeth: 10 – 150 Distance between spindle and machine center: max. (stock angle 5°): 375 mm; min. (stock angle 90°): 75 mm Stroke: 100 mm Slider double stroke: 48 – 400 spm Motor capacity: 4.0 kW Machine weight: 8750 kg

Condition: ready for operation (used), SYKES 5 E MODEL, 2 UNITS AVAILABLE Double helical gear cutting, herringbone gear generator SYKES 1600 mm Gijdsx Rvguepfx Acwjr Special machine for gear power transmissions, oil, petrol & gas industry. In very good working condition. Specifications: Work spindle bore: 8.75" (222 mm) Tailstock to face of work spindle, max: 48" (1219 mm) Standard cutter diameter: 6" P.C.D. Standard cutter bore: 3.5" EXTERNAL GEARS: Blank diameter, max: 63" (1600 mm) Min: 0 Face width, double helical: 0 - 18" (0 - 457 mm) Face width, spur or single helical: 0 - 10" (0 - 254 mm) INTERNAL GEARS: Blank diameter, max: 66" (1676 mm) Face width: 0 - 8" (0 - 203 mm) P.C.D., max: 66" - (2 x rim thickness) Pitch range, max: 16 D.P. (1.6 Mod) Min: 1.5 D.P. (17 Mod) Helix angle range: 0 - 45 degrees Dimensions: 3300 mm (L), 3250 mm (W), 2700 mm (H) Weight: 18,940 kg

Condition: ready for operation (used), Straight bevel gear generator SARATOV 5C276P Max Module 10 Max. gear wheel diameter 500 mm Max. gear wheels cone distance 250 mm Max. gear ring width 80 mm Min. angle of dividing cone (pitch), degrees 5 Number of wheel teeth: 10 - 150 Distance between spindle and machine center, mm - max. (stock angle 5 degrees) 375 mm; - min. (stock angle 90 degree) 75 mm Stroke 100 mm Slider double stroke 48 - 400 spm Motor capacity 4 KW Machine dimensions 2885 x 2570 x 1995 mm Godpfxsuc T Hxs Acwoir Machine weight 8750 kg

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm Gsdpfx Aovr Hf Eecwjir inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 Gijdpfx Aou Dbucscwsr - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Giodpfx Aexaqa Sjcwjr Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Gedpfx Aortrzdecweir Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Gsdpfoxdfazsx Acwoir Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Gjdsxdfa Uopfx Acwoir Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Gjdpfxjrtryke Acwjir Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, TECHNICAL DETAILS Max. panel height: 60 mm PVC/ABS edge height: 3 mm MACHINE DETAILS Gisdjyzm R Sepfx Acwjr Power-Touch control: 21" full HD display EQUIPMENT - Anti-adhesive unit - Twin-motor corner copying unit - Roll holder plate - EVA glue application unit with pre-melter and glue pot - Edge pressure unit for straight profiles with pressure rollers - End trimming saw unit with automatic swivel adjustment - Double-motor beveling unit with adjustable setting - Double-motor multifunctional rounding unit (beveling + rounding) - Working height electronically adjustable via NC control - Workpiece support guide with idler rollers - Side roller conveyor with free-running wheels - Edge scraper unit - Glue scraper unit - Brushing unit External reference: MMG013

Condition: used, Year of construction: 2022, operating hours: 26,536 h, machine/vehicle number: A3231E0445, laser type: fiber laser, laser power: 24,000 W, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2022) High-spec 2D fiber laser cutting machine. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. Key data Machine No.: A3231E0445 Year: 2022 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Process cooler (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance (LLK). Machine status light. Integrated electrical cabinets. Rated to 45 °C ambient. Cutting unit Single cutting-head strategy. Protective glass with online monitoring. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Functions & packages Gjdpfoy Aaxxex Acweir AdjustLine, BrightLine Fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine. Fusion cut, Highspeed, Highspeed Eco, copper, brass, thick sheet and gas mix (N2/O2) cutting packages. Compressed-air cutting. CoolLine. Nanojoints. Smart Collision Prevention. Dot Matrix Code. EdgeLine Bevel. Smart Nozzle Automation. Microweld. Quick post-production. Auto-shutdown. Programmable gas/pressure selection. Safety & extraction CE compliant. Light barriers. Enclosed housing with viewing panels. Electrical rolling roof. Multi-chamber compact dust extractor. Automation & pallet changer Automatic heavy-duty pallet changer (longitudinal). LiftMaster Compact 1530 (AL34) with hydraulic loading table, additional suction cups and sheet peeler. Connectivity USB, RJ45, Central Link, Online Update Manager, RCI, remote support, MobileControl app, Wireless Operation Point. Dual integrated cameras. Production plan, multi-sheet processing, Condition Guide, Cutting Guide. Additional equipment Witt gas mixer unit. Gas prefilters. Cleaning brush. Mild steel slats (33.5 mm spacing). Wide transverse conveyor belt with tipping container (right). Mezzanine installation (steel structure not included). Availability Condition: Used. Available: August 2026. Viewing/cut test by appointment. EXW — buyer arranges transport. Decommissioned by authorised TRUMPF engineers and loaded onto buyer's transport. Export packing available. Enquiries Contact for full spec pack, hours, service history, spares list and video/cut samples.

Condition: good (used), Year of construction: 2009, functionality: fully functional, In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm table surface area 4200 x 1150 mm Gijdpfoyz Ac Rjx Acwjr table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 rpm transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, Bodor T230A-6.5-6Kw CNC Bevelling Tube Fibre Laser Cutter Brand new 2025 Automatic bundle tube loader for 6500mm lengths Gjdpsyuv Dtofx Acwjir Optional bevel cutting head included for bevel cuts in ±45 degrees Tube size range Ø25-356mm With Dust Collector Safety Light Guards and Internal Camera Manuals Available