Used Belt Dryer for sale (10,222)

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Features and technical data: with 2 combination units with 2 contact rollers, 1 x 65° shore, 1 x 85° shore and 2 air sanding shoes Sanding width: 1350 mm Abrasive belt dimensions: 1360 x 1900 mm Maximum workpiece thickness: 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at infeed Roller table at outfeed Infinitely variable feed speed: 2.5 to 12.5 m/min Nsdpfx Aey Dkhgoaaocr Weight approx. 3700 kg Availability: approx. May/June Location: Thuringia

Condition: used, functionality: fully functional, Various used conveyor belts in stock Belt widths: between 500 and 1,200 mm Axle lengths: from 2 to 40 m Ncjdpfxewm Nibj Aaajr For all types of mineral bulk materials With and without supports, some with undercarriage

Condition: like new (used), Year of construction: 2021, functionality: fully functional, conveyor belt length: 10,000 mm, conveyor belt width: 500 mm, conveyor belt speed: 1,250 mm/s, motor manufacturer: Rulmeca, Lightweight conveyor belt (2 pieces available) - unused galvanized with RULMECA 3 kW drum motor Belt: EP 250/2 3:1 with feed chute Emergency stop via rope pull switch Nedpfx Aaow S D Nroajcr

Condition: like new (used), functionality: fully functional, conveyor belt length: 11,000 mm, conveyor belt width: 650 mm, Belt width: 650 mm Length: 11 m Chevron belt 4 kW RULMECA drum motor Ncsdpoxbrkuefx Aaaor with feed hopper and support legs

Condition: refurbished (used), functionality: fully functional, conveyor belt length: 40,000 mm, conveyor belt width: 800 mm, power: 22 kW (29.91 HP), smooth belt EP630 6:3 SIEMENS electric drive 22 kW Feed and discharge hopper stable V-support Njdpfotp Ig Tsx Aaascr

Condition: good (used), Motan MI 120 – G1 - 0 dryer Nsdjyz Uxkepfx Aaajcr

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency inverter With control system Heating capacity: 223 kW Nodpfx Aaoy Evkpjaocr Water temperature: 85 °C Water flow rate: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating system not included! Drying chamber will be professionally dismantled and loaded onto a truck.

Condition: used, Year of construction: 1987, Wide belt sander Manufacturer: Samco Model: EG Nodpfexdnrgjx Aaascr Year of manufacture: 1987 Sanding length: 3,000 mm Includes spare belts ä16426

Condition: new, Year of construction: 2026, functionality: fully functional, sweeping width: 530 mm, fuel type: electric, drive type: Elektro, Scrubber dryer Condition: New machine Nodoyi Impepfx Aaaecr Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Battery type: Gel Battery year: 2025 Battery condition: New Description: New machine with 12 months warranty

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer 100 litres Ncodpfx Aajxtitkoaer As new, was only used for sampling in a toolmaking facility.

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Nedpfx Aaexqgdnjajcr

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Nedpex Twcpofx Aaascr

Condition: good (used), Year of construction: 2008, Construction Site Price: Ncodoy Aivgepfx Aaaor 2x 180 Degree Belt Curve Conveyors, Transnorm, 1600-105 – used – Price per unit ex-location: only €2,950 (net), dismantled, packed, and loaded! Manufacturer: Transnorm Model: 1600-105 Year of manufacture: 2008 Belt width: approx. 80 cm Dimensions: Height incl. edging: approx. 84 cm Outer dimension: approx. 3.30 m Including support feet Condition: good Available: immediately Location: Heilbronn

Condition: new, Year of construction: 2024, Conveyor belt: hydraulic folding in and out Scraper: front and rear scraper Conveyor belt length: 25.000 mm Ncedpfxoikqxts Aaaor Engine: Caterpillar 4.4 Fixid Speed Engine 133 HP Crawler track: floor plates 400 mm Discharge height 22,5° / 27,5°: 8.8200 / 11.000 mm Conveyor belt width: 1.200 mm Feed hopper: Capacity 8 m³

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G for soldering or annealing under exogas atmosphere. - Heating power: 137 kW - Conveyor belt width: 600 mm - Clear height above belt: 200 mm - Heated length: 3000 mm - Net throughput: 254 kg/h - Max. temperature: 1150 °C Ncedpfx Aasy Ddtijaor

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation Ncjdpfxsyl Ilwj Aaasr - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: good (used), Metabo belt sander UR 33/2S, 400 Volt, 2800 rpm Ncsdpex Rt D Rjfx Aaaer

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Ncsdpfeg Ngmxsx Aaaor

Condition: used, Year of construction: 2006, Working width: 1100 mm Sanding belt dimensions: 1120 x 1900 mm Height: 1890 mm Length: 1335 mm Pass-through height: 3 - 150 mm Feed speed: 2.5 - 13 m/min. Extraction capacity: 1830 m³/h Extraction connection: 1x 180 mm Compressed air: 6 bar Drive motor: 15 kW Total connected load: 17 kW Weight: approx. 1500 kg Nodpfey Dd Ndox Aaajcr Storage location: Supplier

Condition: used, Year of construction: 1999, Volumetric flow rate ISO 7183 A1: 0.6 m³/minPressure dew point: 3°CPressure loss: 0.07 barPower consumption at 100% flow: 0.29 kWPower consumption at 50% flow: 0.17 kWOverpressure: 3 to 16 barAmbient temperature: +3 to +43°CMax. inlet temperature (compressed air): 55°CDimensions (W x D x H): 630 x 484 x 779 mmWeight: 70 kgCompressed air connection: G 3/4Condensate drain connection: G 1/4Electrical supply: 230 V / 1 / 50 HzStorage location: Ncedpfx Aey Ernwoaaer

Condition: used, functionality: fully functional, machine/vehicle number: U00448, Year of construction: 2016, operating hours: 1,403 h, fuel type: electric, construction height: 2,100 mm, total length: 2,420 mm, drive type: Elektro, construction width: 1,460 mm, Scrubber dryer machine Chassis number: U00448 Technical condition: good Njdpfxouhxico Aaaocr Battery voltage: 36V Battery capacity: 625Ah Battery year: 2016 Description: Tennant T17 No.: R0393 Year of manufacture: 2016 Recorded operating hours: 1403 The machine is in good optical and technical condition. Charger available on request. Fast and uncomplicated transport can be arranged by agreement! This advertisement is for device identification purposes only! A detailed description of the condition and any available features will be provided individually upon request! Subject to errors and prior sale. Sale to businesses only. Every sale of used equipment takes place under exclusion of warranty or guarantee. If you haven’t found your desired forklift, please contact us. We have a large selection of further machines on site.

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Nsdpoy E S E Aofx Aaajcr

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Nsdpjy E S E Nsfx Aaajcr

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WEBER KSF-3-1350 (CMC) Fine/Cross Sanding Machine with 3 sanding belts for premium fine, veneer, and high-gloss sanding. Featuring a constant working height and configured as follows: Machine Frame Heavy-duty welded steel construction designed to accommodate 3 sanding units and workpiece cleaning components, such as workpiece air cleaning. Electrical control cabinet integrated into the frame. - Constant infeed height of 900 mm - Control and sanding belt change side is left in feed direction - Heavy-duty height adjustment via spindle lift gearing Ncedey A D Eispfx Aaasr - High-quality transport table with conveyor belt - Stepless feed speed from 3–18 m/min, frequency controlled - Vacuum conveyor version with one vacuum blower, 5.5 kW, with a vacuum channel extending up to the machine’s upper edge - Safety systems compliant with CE standards - Electrical equipment conforms to VDE - Doors on both sides of the machine; on the belt change side with safety interlocks and sight window for monitoring belt oscillation - With one infeed and outfeed table with rubber-coated rollers Unit 1: Sanding units engineered for double-shift operation. - Belt run-off switches connected to oscillation monitoring on wide belts - Automatic sanding belt length compensation - Non-contact optical belt detection, self-cleaning, on belt change side - Oscillation adjustment on belt change side - Wear-free DC braking - Extraction hoods with optimal airflow to maintain TRK levels Unit 1: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Unit 2: CBF Combi Unit with - Grooved rubber contact roller, Ø 130 mm, rubber hardness 60 Shore - Cross-running lamella belt with separate 4.0 kW drive - ISA segmented pressure beam system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotation) - Workpiece-controlled oscillating sanding belt blow-off unit Unit 3: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Control Control terminal: 'SIEMENS' MP 377 12" multi-panel - Graphical operator guidance via 12" color display - Program memory for 300 programs - Parameter setting via program - WANDRES Micro-Cleaning (single-brush version) Power sword brush with integrated micro-moistening of the linear brush (for optimal lacquer dust removal) Technical Specifications: Working width: 1350 mm Drive unit 1 (frequency controlled, Eco-Drive): 15 kW Drive unit 2 (frequency controlled, Eco-Drive): 20 kW Drive unit 3 (frequency controlled, Eco-Drive): 15 kW CBF drive: 3 kW Vacuum blower: 5.5 kW Feed drive (frequency controlled): 3.0 kW Height adjustment (frequency controlled): 3 kW Sanding belt speeds (frequency controlled): approx. 3–20 m/s Cross-belt dimensions (W x L): 2x150x5100 mm Wide belt dimension (W x L): 1370 x 2620 mm Workpiece thickness (min./max.): 4–140 mm

Condition: good (used), Code: 0361 Brand: NERLI Model: PN 28 Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of selectors Nodpjy D T Euefx Aaaocr Table lenght mm 3000 Table width mm 950 Automatic table raising Electronic display Inverter for belt speed Blowers for abrasive belt cleaning Main motor 20 Hp Table lifting motor 1 Hp Max working height 550 mm Belt dimensions mm 9650 x 150 Belt speed mt 25/sec Side support guide N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 2000 x1850 h Weight kg 2000