Used Basic Shots for sale (2,303)

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) Ncsdpfx Ahswhfqwjusw - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: reconditioned (used), Year of construction: 2023, shaft length under head: 200 mm, drawing speed: 75 mm/s, disc diameter: 14 mm, 2-shot cold press. FIDE EF-180 For the production of long screws Range: Diam.14x200 mm. Ppm: 75 Overhauled to new by HBR Ltd. Ncsdpfx Ahsqagpxsusw

Condition: used, Year of construction: 1986, functionality: fully functional, We offer a continuous spray booth – Gutmann RZ – 1252. Year of manufacture: 1983 Inlet/outlet dimensions: 1200 x 350 mm (w x h) Turbines: 4 x 7.5 kW Electrical control panel, new in 2024, including frequency converters. Infeed conveyor: approx. 9000 mm Outfeed conveyor: approx. 9000 mm Filtration unit - Bartling Year of manufacture: 1996 Capacity: 6000 m3/h Motor power: 5.5 kW Nsdpezl Ryiofx Ahuecw The machine is functional and still in operation. The stated price is for the complete machine + control panel + filtration + conveyors.

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). Ncjdpowvgbgofx Ahuow - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle Njdpfoyhi Husx Ahuscw * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: ready for operation (used), A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Nodszdul Tepfx Ahujcw

Year of construction: 2010, condition: used, Turbo M100P single shot depositor stainless depositor, 25L hopper, adjustable weight control, variable speed Nedpfx Ahjdbqx Sjuecw

Year of construction: 2015, condition: used, Steven single shot depositor 100L stainless hopper, adjustable fill size on mobile stainless frame Ncjdpfx Ajdbqzdehuow

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 13,5 kg span width: 208 mm Nedpevc Dv Asfx Ahuocw *

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Depth: 2150 mm Height: 3900 mm Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Height: 3500 mm Njdpfx Ahozbqp Djuocw Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Refurbished shaft and belt pulley Two electric motors have been rewound

Condition: used, Dust separator, dust extractor, suction unit, dust cyclone, used equipment Overall Dimensions: Width: 1200 mm Depth: 600 mm Nodpsyzmihofx Ahujcw Height: 1560 mm Inlet Size: 90 mm Outlet Size: 115 mm Equipped with a pneumatic valve

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Nedsyfvg Aspfx Ahuocw Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2015, Type: MHS Basic H 12mm Voltage: 230 Nodpeyzzu Esfx Ahuscw

Condition: new, Year of construction: 2026, CNC-controlled frame gluing press for gluing all types of frame constructions with dowel joints, mortise and tenon joints, and 45° miter joints. Manual centering of the left press plates, hydraulic centering of the right press plates, and hydraulic movement of the upper press beam. Maximum pressing area: 3,000 x 2,000 mm Two vertical press cylinders – pressing force per cylinder: 7.4 tons Two horizontal press cylinders, stroke: 150 mm – pressing force per cylinder: 2 tons. Maximum profile depth: 130 mm. Positioning of the two right horizontal press plates by hydraulic cylinders. Positioning of the upper press beam by hydraulic cylinders. Technical data: Weight: 1,300 kg Drive power: 1.5 kW Dimensions: 3.8 x 1.2 x H 2.4 m Ncodpfx Ahozhi Nbousw - Control of the hydraulic movements digitally via the touch screen using softkey buttons - Programmable pressing programs – for pressing pressure and pressing time, automatic program-controlled opening of the press cylinders. Operator safety: Automatic locking of the upper press beam in the event of sudden pressure loss or when the machine is switched off.

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI Njdey Nnnnjpfx Ahujcw - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: used, This listing is for the IKA Werke yellowline MSH Basic S2 magnetic stirrer The unit is in full working condition and is ready for immediate use Ncedpsxhd H Uofx Ahusw Overview & Key Specifications This lab instrument is a heated magnetic stirrer—part of IKA’s Yellowline series—combining stirring and heating functionalities in one compact device Core Features (sourced from QuestPair & LabMakelaars listings): Maximum stirring capacity: approximately 5 L of water Temperature range: from room temperature up to 350 °C Stirring speed range: spans from 0 to 2,000 rpm Heating power: rated at 400 W Physical Specs: Heating plate diameter: around Ø 125 mm Overall dimensions (WxDxH): 160 × 210 × 105 mm Weight: approximately 2.3 kg Summary Table Feature Specification Stirring Capacity Up to 5 L of water Temp. Range Room temp – 350 °C Speed Control 0 – 2,000 rpm Heating Output 400 W Plate Diameter ~125 mm Dimensions (WxDxH) 160 × 210 × 105 mm Weight ~2.3 kg Additional Notes The Yellowline series is known for its robust, practical design and reliability in regular lab environments. With a 400 W heating capacity, it provides efficient heating across a broad temperature range—ideal for a variety of chemical or biological workflows. The 0–2,000 rpm stirring speed allows for flexible agitation, tailored to your sample or protocol requirements. Its compact dimensions and lightweight build (just 2.3 kg) make it ideal for benchtops where space is at a premium.

Condition: used, This listing is for 1 of 2 IKA MS 3 Basic Orbital Shaker. The unit is in full working condition and is ready for immediate release. The IKA MS 3 Basic Orbital Shaker is an efficient and versatile laboratory device designed for a variety of shaking tasks involving small vessels and microtiter plates. Its compact design and robust features make it suitable for both routine laboratory applications and more specialized experiments. Key Features: Orbital Movement: The shaker operates with an orbital motion, characterized by a shaker diameter of 4.5 mm. This design allows for effective mixing of samples within a range of vessel types. Two Operating Modes: Mode A (Safe Mode): In this mode, the shaker detects the type of attachment being used and restricts the speed to a maximum of 1,300 rpm for non-standard attachments, ensuring safety and preventing damage to both samples and the device. Mode B: This mode does not feature attachment detection and allows for higher speeds up to 3,000 rpm, depending on the attachment and application requirements. Touch Operation: The standard attachment enables up to 3,000 rpm in touch mode, providing immediate mixing responses when needed. Stable Shaking: The shaker maintains stable operation across all speed settings, ensuring uniform mixing of solutions and samples without fluctuations that could impact experimental results. Durable Construction: Built with a robust zinc die-cast casing, the MS 3 B promises longevity and reliability in various laboratory environments. Permissible Shaking Weight: The machine can accommodate a maximum shaking weight (including attachments) of 0.5 kg, making it versatile for different laboratory setups. Key Specifications: Type of Movement: Orbital Shaker Diameter: 4.5 mm Njdjxxz R Eopfx Ahuecw Permissible Shaking Weight (including attachments): 0.5 kg Operating Modes: Mode A: Safe mode with attachment detection Mode B: Without attachment detection Speed Range: 0 - 3,000 rpm (Limited to 1,300 rpm in Mode A with non-standard attachments)

Condition: new, Column drilling machine Manufacturer: MAXION Ncjdoci Su Djpfx Ahuow Model: UNIMAX 4 Basic Condition: New machine Spindle speed (continuously variable): Range A: 120 - 2,500 rpm Range B: 60 - 1,250 rpm Normal drilling capacity: 40 mm Standard features: - Continuously variable drilling feed - Thread cutting device - Continuously variable speed control - Handle cross control - Digital display for speed, feed, and drilling depth - Drill breakage function - Operating manual with the following options: - Free cutting device

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Nsdpfx Ahoy R U Abjuecw Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer Ncodpfx Ahey Sqrbouew * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights Ncodpfxjwwn Abe Ahusw * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Year of construction: 2019, operating hours: 3,061 h, condition: used, functionality: fully functional, EVT GIGANT Vapor Degreasing System – for large, heavy, and bulky components Nsdsy Tnyrspfx Ahuocw The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this version does not include flooding of the work chamber, the required solvent volume remains comparatively low despite the large chamber size – an advantage for economy and operating costs. The freely programmable PLC control system enables precise adjustment to a wide range of cleaning and degreasing processes as well as individual production requirements. Maximum system availability is ensured by the online remote maintenance system, developed in cooperation with SIEMENS, and an efficient online service. The used system is in excellent technical condition and can be inspected and tested in our technical center in D-75447 Sternenfels after prior arrangement. Technical highlights: - Closed system without exhaust air - Top loading - Spraying system & vapor degreasing - Hot air drying - Vacuum distillation - Activated carbon module (designed for 2-shift operation) - Control system: Siemens S7 Profinet - Online access for remote maintenance System equipment: - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 2100x400x600 mm - Throughput: max. 2-3 batches/h (max. 600 kg/h) - Filling volume: 400 dm³ - Energy requirement: 28 kWh - Connected load: 56 kW - Compressed air: 6 bar - Loading height: 1500 mm - System dimensions L/W/H: 4200 / 1750 / 2100 mm - System weight: 3500 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2292.56 € Nsdpfx Ahoy Hf Rbjuscw 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.400 with drill head height adjustment OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: ready for operation (used), Year of construction: 2004, A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement. Ncjdpfx Ajy Tatwshuow

Year of construction: 2026, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Ncsdpfx Ahei D Digoujw Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 7'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice